Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in October 2026.
The 10 customer reviews shown here average 4.9 out of 5.
The most recent job was on October 16, 2026.
Adon Complete Air Conditioning and Heating has completed 587 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Reviews
Charles is a real professional. He fixed my Lennox HVAC while I was at work. He knew what to do and I got home to a cool house on a 3-digit degrees summer day. Not only that, but when I called to pay over the phone, he explained what the issue was and DID NOT OVER CHARGED me. Thank you for the best assistance ever. Blessings!
Clarence was amazing! He went above and beyond to check my system. I am grateful for the integrity in his work.
Rep was friendly, diagnosed the issue quickly, and gave a comprehensive check of the system after resolving the problem.
Charles came out as soon as he got the call that our unit was flooding our house. Cleared our drain line, installed a switch, and taught us how to clear the line. Knew we had dogs so he installed it so the switch would stop the problem and still circulate air so in the heat of summer our dogs wouldnt be at risk of heat stroke. He knew what we needed without us having to ask. Worth every penny. We will always call Adon.
Our technician was polite, efficient, and showed me exactly what the issue was. The part needed was on the truck and our A/C is up and running!
He was superb! Awesome personality.
I found these folks on Google and it was fortuitous I found them.
Job Locations
Completed heating maintenance and system. Checked all electrical components and everything checks out. Took temperature split on systems split was above a 22. Change filter out provided by homeowner. Treated drain lines for system. Checked growth on system on both Plenum and evaporator coil and blower wheel. Sent estimate to customer for level three cleaning. Spoke to Paola about in-house financing for a customer. . Will be getting with dispatch office to schedule the cleaning and work a payment plan out for her. Checked electrical components on condenser unit. Washed condenser unit out. Uploaded all data tags. System is currently running at this time.
2 system heating maintenance. Customer replaces their own filter. Removed and cleaned flame sensor. Checked resistance on hot surface igniter. Measured microamps on flame sensor, it is within acceptable range. Checked blower motor and wheel. Set thermostat to heating and watched system go through sequence of operation. All limit switches and pressure switches are functioning correctly. Flames are healthy with solid blue color. Measured amp draw on blower motor and inducer motor. Checked temperature rise across systems. Systems are heating properly at this time.
Performed evaporator coil and blower wheel cleaning. Removed blower wheel and pulled assemble apart. Sprayed foam cleaner on wheel and let it soak. Sprayed wheel off with high pressure water to remove remaining spots. Used jetter to deep clean evaporator coil. Cleaned surfaces using disinfectant cleaner and wipes. Reinstalled blower wheel. Tested system after cleaning. System is operational at this time.
Perform two system maintenance on home. Tested all electrical components on system. Everything checks out. Took split on systems despite was sufficient for both systems. Inspect inspected flames on systems. Cleaned flame sensor on systems. Blew out both pressure lines on systems as well. Inspected both return Plenum and filters. Filters were replaced yesterday by homeowner did not need to replace. Blower wheels were inspected some debris built up on them. One return box seem to be pretty dirty. Spoke to customer about this. That will be moving out in the next month. They already purchased a new home. treated both systems on their drain lines. Drain lines seem to be draining perfectly fine. Visually inspected both condenser units systems are currently running at this time. All pictures are uploaded and email to customer.
High Indoor Humidity – System Evaluation Summary During our thorough evaluation of the HVAC system, we identified several conditions that can contribute to the home experiencing higher-than-normal indoor humidity levels. Proper humidity removal depends on the HVAC system operating long enough, maintaining the correct temperature split, having the proper refrigerant charge, and receiving accurate temperature readings from the thermostats. 1. Supply Air Blowing Directly on Thermostats First Floor – Master Bedroom The Honeywell thermostat located in the master bedroom currently has a supply air vent blowing directly toward it. This can manipulate the thermostat’s temperature reading because the thermostat is sensing the cold conditioned air coming directly from the supply vent rather than the average temperature of the room. This may cause the thermostat to satisfy prematurely and shut the cooling system off before it has had enough runtime to properly remove moisture from the home.
2 system heating maintenance. Customer just replaced his own filters, they are still clean. Removed and cleaned flame sensors. Checked resistance on hot surface igniter. Measured microamps on flame sensors, both are within acceptable range. Checked blower motors and wheels. Set thermostat to heating and watched system go through sequence of operation. All limit switches and pressure switches are functioning correctly. Flames are healthy with solid blue color. Measured amp draw on blower motor and inducer motor. Checked temperature rise across system. Both are heating properly at this time. Blower wheel and compartment on main system is dirty. Recommend blower wheel cleaning. Also recommend installing better filter system, this will keep the blower and furnace much cleaner than current box filters.
Performed heat maintenance. Inspected all electrical components. Recommend capacitor replacement. Treated drain lines with water and chemical cleaning. Checked heat strips. Checked evaporator and blower wheel for cleanliness. Inspected plenums. Filter was not changed. Customer stated he would change today. Rejected buying one from us.toom temperrature split and system had a 19 degree split. Condenser is very dirty. Recommend chemical cleaning for more effenciency. This is a non profit organization they will have to go through a board to get anything approved. System is currently running at this time. Will follow up with customer on estimates left today. Customer needs 3 days to follow up after he meets with his board members
Arrive for water leak. Customer noticed that floor around unit was wet. Checked drain line and it is clear. Main drain where unit goes into is clogged. It overflowed somewhere and got the ground wet. AC drain is clear and not the problem. Customer will need to get plumber out.
Arrive for quality checkup on new split system and mini split. Set thermostats to cooling and let them run. Checked all safeties inside and out. All work has been completed properly up to code. All wiring connections are clean and tight. Condenser was installed level and placed on concrete pad. Checked temperature of supply air and system are operating properly. Customer is comfortable operating thermostat and has it already connected to phone. Customer does not have any questions at this time.
Arrive for five system heating Maintenance. Customer just replaced all filters, they are still good.. Checked systems in heat pump heating as well as electric heating. Mother-in-law‘s house and guest house are electric heat only. Checked operation of drain lines and treated them with drain solution. Measured amp draw on blower motors. Measured amp draw on electric heat strips to verify they are all working. Check temperature rise across systems. Checked capacitors and contractors for heat pump systems. Condenser coils are still clean. While checking air handler in guest house, noticed oily residue around coil. Performed complementary leak search and found a leak in the coil. System uses R 22 refrigerant which means it cannot be repaired and system will need to be replaced. Customer would like estimate for replacement. - Customer approved repair to replace contactor on upstairs system. - Also sending estimate for indoor cleaning on upstairs unit.

