Denison is one of Grayson County’s most established cities, with a historic downtown that just won the Greatest American Main Street Award in 2025 and neighborhoods that have been around for decades. The homes here are not new construction. They’re established properties with HVAC systems that have real history behind them, and they need a company that knows how to work on all of it. Adon Complete Air Conditioning and Heating has been providing heating and air conditioning service in Denison, TX, for years, and we run calls here regularly. We’re based in Anna, just down Highway 75, and we’re available 24 hours a day, 7 days a week.
The Reality of HVAC in Denison
Denison homes tend to be older, and the HVAC systems reflect that. Our technicians have found evaporator coils in Denison that have never been cleaned, condensers blocked so severely with debris that they could only cool the air by 6 degrees, blower motors that have failed from years of restricted airflow, and R-22 refrigerant systems that are beyond repair and need replacement. We have also found plenty of systems in great shape that just need regular maintenance to stay that way.
The point is this: if you have not had your system serviced in a while, Denison is a place where that matters. A system running at 6 degrees of cooling when it should be running at 18 to 20 is working twice as hard for half the result. Getting a set of professional eyes on it costs a fraction of what an emergency repair costs in August.
HVAC Services We Provide in Denison
AC Repair. We carry common parts on our trucks and handle all makes and models. We resolve most Denison repair calls in a single visit.
AC and Heating Installation. When a system is beyond repair or simply not worth fixing, we provide an honest assessment and a clear replacement price. Every new installation comes with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and covers two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. A maintenance visit helps us catch failing capacitors, clogged drain lines, and dirty coils before they become emergency calls.
Air Duct Cleaning. Older Denison homes often have ductwork that has accumulated years of debris. Our technicians have recommended full system cleanings on multiple Denison service calls this year. A thorough duct cleaning makes a real difference in both air quality and system efficiency.
Air Duct Repair and Sealing. Rodent damage, disconnected ductwork, and aging flex duct are common in Denison homes. Leaky ducts can account for 20 to 30 percent of your system’s output loss. We find and fix them.
Indoor Air Quality. Years of accumulated dust and biological growth on evaporator coils and in ductwork are a real issue in established homes. We offer air filtration systems, UV purifiers, and a free “What Are You Breathing?” screening for Denison homeowners.
Mini-Split Installation. For Denison homes with additions, sunrooms, or spaces where extending ductwork is not practical, mini-splits provide clean, independent cooling and heating without touching the central system.
Heat Pump Installation and Repair. We install and service heat pump systems throughout Denison and Grayson County. A heat pump handles both heating and cooling from a single unit and can be a good option when replacing aging single-purpose equipment.
Adon Complete in Denison
Owner Jesse Villarreal has over 27 years of HVAC experience. We are a Trane Comfort Specialist and Mitsubishi-authorized dealer, which means factory-trained technicians and the full manufacturer warranty on every system we install. We service all brands. We work in Denison regularly and know what the homes here need. Our technicians explain what they find before doing any work, and we don’t push repairs or replacements that aren’t warranted.
One of our Denison customers left a detailed review after our technician, Alex, repaired ductwork in her attic, explained every step of the process, and even helped her address a rodent issue that caused the duct damage. That is the standard we hold ourselves to on every call.
Serving Denison and Grayson County
We serve all of Denison, including Thompson Heights, the downtown historic district, and the neighborhoods along Highway 75. We also serve surrounding Grayson County communities, including Sherman, Van Alstyne, Pottsboro, Gordonville, and Whitesboro.
Questions Denison Homeowners Ask Us
My AC is running, but the house isn’t cooling down. What’s going on?
This is one of the most common calls we get in Denison. The system is running, but airflow is so restricted by dirty coils, a clogged filter, or blocked ductwork that it cannot transfer heat effectively. We have found systems in Denison cooling only 6 degrees when they should be cooling 18 to 20. A diagnostic visit will tell you exactly what is happening. Call (903) 482-4900 to schedule.
I have an older R-22 system. What are my options?
R-22 refrigerant is no longer being manufactured. If your system has a significant refrigerant leak, the practical answer in most cases is to replace it. We will tell you honestly when a repair makes sense and when it does not. If replacement is the right call, we will walk you through your options and give you a clear price before any work is done.
How do I know if my ductwork needs cleaning or repair?
Signs include uneven cooling between rooms, visible dust near supply vents, musty odors when the system runs, or a system that is working harder than it should. Our technicians have found disconnected ducts, rodent damage, and years of debris buildup in Denison homes during routine service calls. A professional duct cleaning and inspection is the only reliable way to know what is in there.
Do you offer HVAC maintenance plans in Denison?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. For Denison homeowners with older systems, staying on a maintenance schedule is one of the best ways to catch small problems before they become expensive ones.
Do you offer emergency HVAC service in Denison?
Yes. We are available 24 hours a day, 7 days a week throughout Denison and Grayson County. When you call after hours, you reach a real person. Call (903) 482-4900 any time.
Schedule Heating and Air Conditioning Service in Denison
If your system hasn’t been serviced recently or you have noticed a change in performance, call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online. We know Denison, and we are ready to help.
Recent Jobs and Reviews in Denison, TX
Denison, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Denison, TX between August 2025 and October 2025.
The most recent job was on October 29, 2025.
Adon Complete Air Conditioning and Heating has completed 85 jobs in Denison, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Preformed gas valve change out. Presented client with before and after pictures of work done. Preformed single system maintenance on a gas furnace 2013. I tested all safeties and electrical components. Client did not have filter at the time of inspection. Tested blower motor amps as well as inducer motor amps. Both tested within manufacturer specifications. Outside unit is a Payne 2021. Unit was back to heating upon departure.
Client stated that he turned on the heat last night and woke up to the thermostat reading 64 degrees this morning. Upon arrival homeowner met me outside and showed me where the attic space was. I proceeded to the attic where I opened the unit and started running diagnostics on the furnace. As I was testing the heat cycle I noticed the igniter would glow and then the gas valve would open and then shut immediately. I also noticed the unit had no sediment trap for the gas line leading into the valve. I determined that ,after a couple of other tests, the gas valve was faulty. I presented my findings to the client. Client has elected to replace the gas valve and add the sediment trap to the line. Unit is currently not heating.
Preformed heating maintenance on a dual fuel system. Tested all electrical components on the furnace all tested within manufacturer specifications. Changed filter for the client. Client did have air scrubber installed but not connected. Tested all electrical components on outside unit all tested within manufacturer specifications. Spoke to client about adding a surge protection to the inside unit. Unit was cooling upon departure.
Preformed heat maintenance. Tested all electrical components inside the furnace. All tested within manufacturer specifications. Changed clients air filter. Client had air scrubber but has it disconnected. They didn’t want it to be reconnected due to they couldn’t tell a difference while it was plugged in. Noticed unit does not have surge protection. Unit was cooling upon departure.
Heat preventative maintenance on a heat pump from 2018 and a mini split from 2022. Customer did provide me with an air filter to replace today 20*20*1. During my inspection I checked temperatures, checked electrical connections and components, checked the heat kit and its safety components, washed the coils outside, and inspected the system for dirt buildup in it. I did find the heat pump to not have surge protection on it and after talking to the customer about it he does want to revisit it on his spring check up. Overall the systems are working and heating at this time and I did show the customer how to turn his electric heat on and off for the temperature drops below 32 degrees. System is running upon departure.
Arrived on site for heating maintenance. Homeowner stated all was well with regards to normal system operation since work was completed in blocking living room vent. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. Clean 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Rinsed condenser unit to promote heat exchange because we noticed a decent amount of dust and debris in the coil. Capacitor was testing within range, but is starting to test a bit low. Contactor was te
208/210 unit freezing. Believed to be refrigerant leak will need to check after defrosting. 2013 213 cap looks old and rusty but testing within range. 200 hallway thermostat wire to outdoor unit has exposed bare copper. This could cause a short. Missing insulation on suction line. Disconnect is broken. Terminal has broken off from disconnect box. Cannot safely check electrical on this unit until, disconnect issue is addressed. 200 lobby old and rusty cap but testing within range contactor is testing outside of manufacturer specification. 202 bad capacitor 200 -B Rooms bad capacitor Hallway and B rooms north side - R22 unit and bush removal MC lobby and Activities- bad capacitor and condenser cleaning MC Dinning - hard start kit recommended for high start amps, capacitor, and Contactor. Fan would come on immediately but compressor is struggling to start up. A Rooms 300s - bad cap Maintenance office - 1996 R22 unit Dining- bad capacitor Kitchen - bad capacitor Room 308 - R22 system 0
Upon arrival, I found that the outdoor unit was not getting voltage. I confirmed at the furnace board that my voltage was being sent outside. I determined that the thermostat wire is broken somewhere in the ground. Customer approved running a new thermostat wire and Jacob came to assist. System is operational and cooling.
Ac preventative maintenance on a heat pump from 2020 with air filter size 16*25*4 which customer has recently replaced. During my inspection customer brought to my attention that she was having the company that installed the system come out to change the drain pan because it has rust. I also found the capacitor to fail today’s inspection and after bringing it up to the customer she decided to have the original company replace it. Overall the system is cooling and running, electrical components and connections are good and I washed the coil outside today.
Preformed cooling maintenance. Tested all electrical components on he inside unit, treated drain line with total. Tested the blower motor run amps. Tightened all connections to insure that nothing had loosened. Temperature across the coil was at 20 degree split. 56 supply temp and 76 return temperature. Proceeded outside to test all electrical components, run and start amps. Run and start amps for the fan and compressor motor tested within manufacturer specifications range. Tested all other electrical capacitor was testing within manufacturer specifications. However the Contactor was testing on the high side of the manufacturer specifications range at 20.6 ohms. Provided estimate to repeal ace the Contactor. Unit was cooling upon departure.

