Menu

Heating and Air Conditioning Service in Denison, TX

Denison is one of Grayson County’s most established cities, with a historic downtown that just won the Greatest American Main Street Award in 2025 and neighborhoods that have been around for decades. The homes here are not new construction. They’re established properties with HVAC systems that have real history behind them, and they need a company that knows how to work on all of it. Adon Complete Air Conditioning and Heating has been providing heating and air conditioning service in Denison, TX, for years, and we run calls here regularly. We’re based in Anna, just down Highway 75, and we’re available 24 hours a day, 7 days a week.

Schedule Service in DenisonCall (903) 482-4900

The Reality of HVAC in Denison

Denison homes tend to be older, and the HVAC systems reflect that. Our technicians have found evaporator coils in Denison that have never been cleaned, condensers blocked so severely with debris that they could only cool the air by 6 degrees, blower motors that have failed from years of restricted airflow, and R-22 refrigerant systems that are beyond repair and need replacement. We have also found plenty of systems in great shape that just need regular maintenance to stay that way.

The point is this: if you have not had your system serviced in a while, Denison is a place where that matters. A system running at 6 degrees of cooling when it should be running at 18 to 20 is working twice as hard for half the result. Getting a set of professional eyes on it costs a fraction of what an emergency repair costs in August.

HVAC Services We Provide in Denison

AC Repair. We carry common parts on our trucks and handle all makes and models. We resolve most Denison repair calls in a single visit.

AC and Heating Installation. When a system is beyond repair or simply not worth fixing, we provide an honest assessment and a clear replacement price. Every new installation comes with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club is $12 a month and covers two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. A maintenance visit helps us catch failing capacitors, clogged drain lines, and dirty coils before they become emergency calls.

Air Duct Cleaning. Older Denison homes often have ductwork that has accumulated years of debris. Our technicians have recommended full system cleanings on multiple Denison service calls this year. A thorough duct cleaning makes a real difference in both air quality and system efficiency.

Air Duct Repair and Sealing. Rodent damage, disconnected ductwork, and aging flex duct are common in Denison homes. Leaky ducts can account for 20 to 30 percent of your system’s output loss. We find and fix them.

Indoor Air Quality. Years of accumulated dust and biological growth on evaporator coils and in ductwork are a real issue in established homes. We offer air filtration systems, UV purifiers, and a free “What Are You Breathing?” screening for Denison homeowners.

Mini-Split Installation. For Denison homes with additions, sunrooms, or spaces where extending ductwork is not practical, mini-splits provide clean, independent cooling and heating without touching the central system.

Heat Pump Installation and Repair. We install and service heat pump systems throughout Denison and Grayson County. A heat pump handles both heating and cooling from a single unit and can be a good option when replacing aging single-purpose equipment.

Adon Complete in Denison

Owner Jesse Villarreal has over 27 years of HVAC experience. We are a Trane Comfort Specialist and Mitsubishi-authorized dealer, which means factory-trained technicians and the full manufacturer warranty on every system we install. We service all brands. We work in Denison regularly and know what the homes here need. Our technicians explain what they find before doing any work, and we don’t push repairs or replacements that aren’t warranted.

One of our Denison customers left a detailed review after our technician, Alex, repaired ductwork in her attic, explained every step of the process, and even helped her address a rodent issue that caused the duct damage. That is the standard we hold ourselves to on every call.

Serving Denison and Grayson County

We serve all of Denison, including Thompson Heights, the downtown historic district, and the neighborhoods along Highway 75. We also serve surrounding Grayson County communities, including Sherman, Van Alstyne, Pottsboro, Gordonville, and Whitesboro.

Schedule Service in DenisonCall (903) 482-4900

Questions Denison Homeowners Ask Us

My AC is running, but the house isn’t cooling down. What’s going on?

This is one of the most common calls we get in Denison. The system is running, but airflow is so restricted by dirty coils, a clogged filter, or blocked ductwork that it cannot transfer heat effectively. We have found systems in Denison cooling only 6 degrees when they should be cooling 18 to 20. A diagnostic visit will tell you exactly what is happening. Call (903) 482-4900 to schedule.

I have an older R-22 system. What are my options?

R-22 refrigerant is no longer being manufactured. If your system has a significant refrigerant leak, the practical answer in most cases is to replace it. We will tell you honestly when a repair makes sense and when it does not. If replacement is the right call, we will walk you through your options and give you a clear price before any work is done.

How do I know if my ductwork needs cleaning or repair?

Signs include uneven cooling between rooms, visible dust near supply vents, musty odors when the system runs, or a system that is working harder than it should. Our technicians have found disconnected ducts, rodent damage, and years of debris buildup in Denison homes during routine service calls. A professional duct cleaning and inspection is the only reliable way to know what is in there.

Do you offer HVAC maintenance plans in Denison?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. For Denison homeowners with older systems, staying on a maintenance schedule is one of the best ways to catch small problems before they become expensive ones.

Do you offer emergency HVAC service in Denison?

Yes. We are available 24 hours a day, 7 days a week throughout Denison and Grayson County. When you call after hours, you reach a real person. Call (903) 482-4900 any time.

Schedule Heating and Air Conditioning Service in Denison

If your system hasn’t been serviced recently or you have noticed a change in performance, call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online. We know Denison, and we are ready to help.

Schedule Service in DenisonCall (903) 482-4900

Recent Jobs and Reviews in Denison, TX

Rated 4.9 out of 5 stars based on 7 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Denison, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Denison, TX between June 2026 and July 2026.

The most recent job was on July 20, 2026.

Adon Complete Air Conditioning and Heating has completed 85 jobs in Denison, TX in the last 12 months. The first job there was in March 2020.

Job Locations

Clayton P.
Clayton P.
Upon arrival, I found that the system was running, just not efficiently. System was only cooling the air 6°. Return register was pulling in 84° air and supply register was putting out 78° air. Upon further investigation, I found that none of the air filters have been changed in a very long time and return cavities and return Plenum was very dirty. I opened up air handler and found that the evaporator coil was dirty, not allowing proper airflow across coil. Blower housing was also dirty, causing air restrictions. The outdoor condenser was very restricted with debris and needs a thorough chemical cleaning. I also noticed that the air handler was no longer level due to support coming loose and screws had pulled out. I highly recommend a full system equipment cleaning, a duct cleaning and re-leveling the air handler. It is very important to get your system cleaned so that it can run at its peak performance and efficiency. Due to airflow restrictions the system is starved of airflow and the
Denison, TX 75020
Denison, TX - Upon arrival, I found that the system was running, just not efficiently. System was only cooling the air 6°. Return register was pulling in 84° air and supply register was putting out 78° air. Upon further investigation, I found that none of the air filters have been changed in a very long time and return cavities and return Plenum was very dirty. I opened up air handler and found that the evaporator coil was dirty, not allowing proper airflow across coil. Blower housing was also dirty, causing air restrictions. The outdoor condenser was very restricted with debris and needs a thorough chemical cleaning. I also noticed that the air handler was no longer level due to support coming loose and screws had pulled out. I highly recommend a full system equipment cleaning, a duct cleaning and re-leveling the air handler. It is very important to get your system cleaned so that it can run at its peak performance and efficiency. Due to airflow restrictions the system is starved of airflow and the
Denison, TX - Upon arrival, I found that the system was running, just not efficiently. System was only cooling the air 6°. Return register was pulling in 84° air and supply register was putting out 78° air. Upon further investigation, I found that none of the air filters have been changed in a very long time and return cavities and return Plenum was very dirty. I opened up air handler and found that the evaporator coil was dirty, not allowing proper airflow across coil. Blower housing was also dirty, causing air restrictions. The outdoor condenser was very restricted with debris and needs a thorough chemical cleaning. I also noticed that the air handler was no longer level due to support coming loose and screws had pulled out. I highly recommend a full system equipment cleaning, a duct cleaning and re-leveling the air handler. It is very important to get your system cleaned so that it can run at its peak performance and efficiency. Due to airflow restrictions the system is starved of airflow and the
Clayton P.
Clayton P.
Upon arrival I found that thermostat was blank. Thermostat did have 24 V between R and C in terminals. I checked drains drains were not clogged float. Switch was not tripped. I took thermostat off of back plate and connected R,G, and Y and system turned to cooling mode and was running properly. Homeowner opted to have thermostat replaced. I left estimate for condenser cleaning. Condenser was very dirty and as in need of a cleaning. Replaced thermostat and tested system. System is running properly at this time.
Denison, TX 75020
Denison, TX - Upon arrival I found that thermostat was blank. Thermostat did have 24 V between R and C in terminals. I checked drains drains were not clogged float. Switch was not tripped. I took thermostat off of back plate and connected R,G, and Y and system turned to cooling mode and was running properly. Homeowner opted to have thermostat replaced. I left estimate for condenser cleaning. Condenser was very dirty and as in need of a cleaning. Replaced thermostat and tested system. System is running properly at this time.
Denison, TX - Upon arrival I found that thermostat was blank. Thermostat did have 24 V between R and C in terminals. I checked drains drains were not clogged float. Switch was not tripped. I took thermostat off of back plate and connected R,G, and Y and system turned to cooling mode and was running properly. Homeowner opted to have thermostat replaced. I left estimate for condenser cleaning. Condenser was very dirty and as in need of a cleaning. Replaced thermostat and tested system. System is running properly at this time.
Shelby S.
Shelby S.
Upon arrival, I discovered the outdoor unit completely empty of R22 refrigerant. I heard a hissing noise outside and found that the compressor wires had caused a hole. With it being R22, I spoke about replacement. Client opted to pay the service fee only and may reach back out in the coming days. System is an above the tub furdown unit.
Denison, TX 75020
Jesse V.
Jesse V.
Need to clean up the wire with burnt up pull back clean up strip back Replacing the whip from the disconnect to the unit Scope of Work – Condensate Drain Line Cleaning Upon inspection, the condensate drain line was found to be clogged, preventing proper condensate drainage. The safety float switch is shutting the system down to protect the equipment from potential water overflow and damage, causing the outdoor condensing unit to turn off. Our service will include: • Purging the condensate drain line to remove the blockage. • Flushing the drain line thoroughly to restore proper drainage. • Verifying the condensate flows freely through the drain system. • Testing the condensate safety float switch to ensure it is operating correctly. • Running the HVAC system through a complete operational test to verify normal system operation after the drain line has been cleared. Once the condensate drain line has been properly cleaned and flushed, the system should operate normally, allowing
Denison, TX 75020
Denison, TX - Need to clean up the wire with burnt up pull back clean up strip back

Replacing the whip from the disconnect to the unit
Scope of Work – Condensate Drain Line Cleaning

Upon inspection, the condensate drain line was found to be clogged, preventing proper condensate drainage. The safety float switch is shutting the system down to protect the equipment from potential water overflow and damage, causing the outdoor condensing unit to turn off.

Our service will include:
	•	Purging the condensate drain line to remove the blockage.
	•	Flushing the drain line thoroughly to restore proper drainage.
	•	Verifying the condensate flows freely through the drain system.
	•	Testing the condensate safety float switch to ensure it is operating correctly.
	•	Running the HVAC system through a complete operational test to verify normal system operation after the drain line has been cleared.

Once the condensate drain line has been properly cleaned and flushed, the system should operate normally, allowing
Denison, TX - Need to clean up the wire with burnt up pull back clean up strip back

Replacing the whip from the disconnect to the unit
Scope of Work – Condensate Drain Line Cleaning

Upon inspection, the condensate drain line was found to be clogged, preventing proper condensate drainage. The safety float switch is shutting the system down to protect the equipment from potential water overflow and damage, causing the outdoor condensing unit to turn off.

Our service will include:
	•	Purging the condensate drain line to remove the blockage.
	•	Flushing the drain line thoroughly to restore proper drainage.
	•	Verifying the condensate flows freely through the drain system.
	•	Testing the condensate safety float switch to ensure it is operating correctly.
	•	Running the HVAC system through a complete operational test to verify normal system operation after the drain line has been cleared.

Once the condensate drain line has been properly cleaned and flushed, the system should operate normally, allowing
Jesse V.
Jesse V.
Blower assembly pull and clean + horizontal coil cleaning + washable metal filter Here’s a professional service summary you can place in your work order: Service Summary Performed a complete cleaning and restoration of the indoor air handler due to excessive dirt and debris buildup affecting system performance. • Removed and disassembled the blower assembly. • Separated the blower wheel (squirrel cage) from the blower motor for a thorough cleaning. • Washed, sanitized, and cleaned all blower components before reassembling the assembly. • Cleaned the evaporator coil in place using a jetter and approved coil cleaning solution. The coil was heavily impacted with dirt and debris, especially throughout the center of the coil, which was significantly restricting airflow. • Thoroughly flushed the evaporator coil to remove all loosened contaminants and ensure proper drainage. • Installed a new washable air filter. After completing the cleaning, the system was tested and returned to
Denison, TX 75021
Denison, TX - 
Blower assembly pull and clean + horizontal coil cleaning + washable metal filter


Here’s a professional service summary you can place in your work order:

Service Summary

Performed a complete cleaning and restoration of the indoor air handler due to excessive dirt and debris buildup affecting system performance.
	•	Removed and disassembled the blower assembly.
	•	Separated the blower wheel (squirrel cage) from the blower motor for a thorough cleaning.
	•	Washed, sanitized, and cleaned all blower components before reassembling the assembly.
	•	Cleaned the evaporator coil in place using a jetter and approved coil cleaning solution. The coil was heavily impacted with dirt and debris, especially throughout the center of the coil, which was significantly restricting airflow.
	•	Thoroughly flushed the evaporator coil to remove all loosened contaminants and ensure proper drainage.
	•	Installed a new washable air filter.

After completing the cleaning, the system was tested and returned to
Denison, TX - 
Blower assembly pull and clean + horizontal coil cleaning + washable metal filter


Here’s a professional service summary you can place in your work order:

Service Summary

Performed a complete cleaning and restoration of the indoor air handler due to excessive dirt and debris buildup affecting system performance.
	•	Removed and disassembled the blower assembly.
	•	Separated the blower wheel (squirrel cage) from the blower motor for a thorough cleaning.
	•	Washed, sanitized, and cleaned all blower components before reassembling the assembly.
	•	Cleaned the evaporator coil in place using a jetter and approved coil cleaning solution. The coil was heavily impacted with dirt and debris, especially throughout the center of the coil, which was significantly restricting airflow.
	•	Thoroughly flushed the evaporator coil to remove all loosened contaminants and ensure proper drainage.
	•	Installed a new washable air filter.

After completing the cleaning, the system was tested and returned to
Jesse V.
Jesse V.
Arrived at customer’s home to evaluate system drainage concerns. Found the condensate drain line to be clogged, preventing proper drainage. The condensate drain line is designed to remove moisture and condensation produced by the air conditioning system during operation and safely drain it away from the equipment. Cleared the drain obstruction and verified the system is now draining properly. Inspected the system and found the evaporator coil was frozen, indicating a possible refrigerant-related issue. Checked the air filter and confirmed it is not causing an airflow restriction. The system will need to fully thaw before a complete leak search can be performed. Pricing for the recommended leak search will be emailed over for customer review. Additionally, found the system is missing an SS1 float safety switch, which is recommended to help prevent potential water damage in the event of future drain issues. The SS1 switch monitors the drain system and will shut the equipment off if wat
Denison, TX 75020
Denison, TX - Arrived at customer’s home to evaluate system drainage concerns. Found the condensate drain line to be clogged, preventing proper drainage. The condensate drain line is designed to remove moisture and condensation produced by the air conditioning system during operation and safely drain it away from the equipment. Cleared the drain obstruction and verified the system is now draining properly.

Inspected the system and found the evaporator coil was frozen, indicating a possible refrigerant-related issue. Checked the air filter and confirmed it is not causing an airflow restriction. The system will need to fully thaw before a complete leak search can be performed. Pricing for the recommended leak search will be emailed over for customer review.

Additionally, found the system is missing an SS1 float safety switch, which is recommended to help prevent potential water damage in the event of future drain issues. The SS1 switch monitors the drain system and will shut the equipment off if wat
Denison, TX - Arrived at customer’s home to evaluate system drainage concerns. Found the condensate drain line to be clogged, preventing proper drainage. The condensate drain line is designed to remove moisture and condensation produced by the air conditioning system during operation and safely drain it away from the equipment. Cleared the drain obstruction and verified the system is now draining properly.

Inspected the system and found the evaporator coil was frozen, indicating a possible refrigerant-related issue. Checked the air filter and confirmed it is not causing an airflow restriction. The system will need to fully thaw before a complete leak search can be performed. Pricing for the recommended leak search will be emailed over for customer review.

Additionally, found the system is missing an SS1 float safety switch, which is recommended to help prevent potential water damage in the event of future drain issues. The SS1 switch monitors the drain system and will shut the equipment off if wat
Brayden W.
Brayden W.
Arrived on site, found blower motor not running. Tested high voltage to motor and found 120v. Tested control voltage and found 24 being supplied to the fan. This confirms the blower control module is not working. Motor must be replaced to address this. Upon further inspection I found that the pressures were low at about 200 standing pressure. This indicates there is a leak in the system. Advised homeowner that i would have to charge them to find the leak, but 9/10 it’s in the evaporator coil and that I didn’t not see any obvious leaks outside. Advised system replacement as motor and coil cost is most of the way to a new system, and with the age of the system I can’t make any guarantees about the rest of the system if repairs were to be completed. Set up comfort advisor visit for Wednesday after 3:30. System shut off at outdoor breaker to prevent damage to the compressor.
Denison, TX 75020
Denison, TX - Arrived on site, found blower motor not running. Tested high voltage to motor and found 120v. Tested control voltage and found 24 being supplied to the fan. This confirms the blower control module is not working. Motor must be replaced to address this. Upon further inspection I found that the pressures were low at about 200 standing pressure. This indicates there is a leak in the system. Advised homeowner that i would have to charge them to find the leak, but 9/10 it’s in the evaporator coil and that I didn’t not see any obvious leaks outside. Advised system replacement as motor and coil cost is most of the way to a new system, and with the age of the system I can’t make any guarantees about the rest of the system if repairs were to be completed. Set up comfort advisor visit for Wednesday after 3:30. System shut off at outdoor breaker to prevent damage to the compressor.
Denison, TX - Arrived on site, found blower motor not running. Tested high voltage to motor and found 120v. Tested control voltage and found 24 being supplied to the fan. This confirms the blower control module is not working. Motor must be replaced to address this. Upon further inspection I found that the pressures were low at about 200 standing pressure. This indicates there is a leak in the system. Advised homeowner that i would have to charge them to find the leak, but 9/10 it’s in the evaporator coil and that I didn’t not see any obvious leaks outside. Advised system replacement as motor and coil cost is most of the way to a new system, and with the age of the system I can’t make any guarantees about the rest of the system if repairs were to be completed. Set up comfort advisor visit for Wednesday after 3:30. System shut off at outdoor breaker to prevent damage to the compressor.
Brayden W.
Brayden W.
Reverified bad capacitor and found 40/45 mfd. Replaced capacitor and dated it. Photos uploaded and tested system to ensure good functionality.
Denison, TX 75020
Denison, TX - Reverified bad capacitor and found 40/45 mfd. Replaced capacitor and dated it. Photos uploaded and tested system to ensure good functionality.
Denison, TX - Reverified bad capacitor and found 40/45 mfd. Replaced capacitor and dated it. Photos uploaded and tested system to ensure good functionality.
Brayden W.
Brayden W.
1. Visually inspected condenser coil for leaks and abnormalities. 2. Inspected condenser fan motor, blades and bearings. 3. Inspected, cleaned, and, tightened wiring connections. 4. Measured capacitance of compressor/fan motor capacitor. 5. Inspected and measured resistance of contactor 6. Measured compressor current draw. 7. Measured condenser fan motor amp draw. 8. Inspected and replaced return filter. 9. Inspected return plenum for dust or debris. 10. Inspected evaporator coil for cleanliness and oxidation. 11. Inspected blower motor/ blower wheel for dust and debris 12. Measured blower motor current draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested drain lines for proper drainage and treated to prevent blockages. 15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. Found failing capacitor no longer under warranty as of 03/00/26. Advised homeowner the capacitor that helps
Denison, TX 75021
Denison, TX - 1.  Visually inspected condenser coil for leaks and abnormalities.
2. Inspected condenser fan motor, blades and bearings.
3. Inspected, cleaned, and, tightened wiring connections.
4. Measured capacitance of  compressor/fan motor capacitor.
5. Inspected and measured resistance of contactor
6. Measured compressor current draw.
7. Measured condenser fan motor amp draw.
8. Inspected and replaced return filter.
9. Inspected return plenum for dust or debris.
10. Inspected evaporator coil for cleanliness and oxidation.
11. Inspected blower motor/ blower wheel for dust and debris
12. Measured blower motor current draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested drain lines for proper drainage and treated to prevent blockages.
15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris.

Found failing capacitor no longer under warranty as of 03/00/26. Advised homeowner the capacitor that helps
Denison, TX - 1.  Visually inspected condenser coil for leaks and abnormalities.
2. Inspected condenser fan motor, blades and bearings.
3. Inspected, cleaned, and, tightened wiring connections.
4. Measured capacitance of  compressor/fan motor capacitor.
5. Inspected and measured resistance of contactor
6. Measured compressor current draw.
7. Measured condenser fan motor amp draw.
8. Inspected and replaced return filter.
9. Inspected return plenum for dust or debris.
10. Inspected evaporator coil for cleanliness and oxidation.
11. Inspected blower motor/ blower wheel for dust and debris
12. Measured blower motor current draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested drain lines for proper drainage and treated to prevent blockages.
15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris.

Found failing capacitor no longer under warranty as of 03/00/26. Advised homeowner the capacitor that helps
Shelby S.
Shelby S.
I returned to install a blower control board. I tested the system after to ensure proper operation. System is cooling upon departure.
Denison, TX 75020
Denison, TX - I returned to install a blower control board. I tested the system after to ensure proper operation. System is cooling upon departure.
Denison, TX - I returned to install a blower control board. I tested the system after to ensure proper operation. System is cooling upon departure.

Your High Efficiency

Experts