Menu

Heating and Air Conditioning in Plano, TX

Adon Complete Air Conditioning and Heating has provided HVAC services in Plano, TX, for years, serving Collin County from our home base in Anna, just up Highway 75. Whether your AC quits on a July afternoon, your furnace needs attention before the first cold front, or you are ready to upgrade to a more efficient system, our technicians regularly work in Plano neighborhoods and know the homes here well.

Plano is one of the largest cities we serve, and its homes reflect that. We work on older single-stage systems in established East Plano neighborhoods and modern variable-speed equipment in newer Legacy corridor builds. Many larger homes in Plano run two separate HVAC systems, and we are experienced diagnosing and servicing both in the same visit. We service all makes and models; we are a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we are available 24 hours a day, 7 days a week for emergencies.

Schedule HVAC Service in PlanoCall (903) 482-4900

HVAC Services We Offer in Plano, TX

AC Repair: Same-day AC repair available throughout Plano and Collin County. We diagnose and repair all makes and models, and most calls are resolved in a single visit. When your air conditioning goes out in the Plano heat, we treat it like the emergency it is.

AC Installation and Replacement: When your Plano home needs a new system, we size it correctly using a load calculation and install it to manufacturer specs. All new installations come with up to a 10-year labor warranty. We’ll help you choose the right capacity and efficiency rating for your home, not just the unit that fits the budget.

Heating Repair and Installation: We service gas furnaces, heat pumps, and electric systems throughout Plano. Winters here are mild but the occasional hard freeze is real, and a furnace that won’t fire in January isn’t something you want to wait on. We stock parts for the most common brands and most repairs are done in one visit.

HVAC Maintenance: Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Plano homeowners running two systems, it’s the most practical way to keep both units maintained without scheduling separate visits.

Ductless Mini-Split Systems: Plano’s sunrooms, home offices, garage conversions, and older additions without ductwork are ideal for ductless mini-splits. We install single and multi-zone systems throughout Plano, and they’re significantly more efficient than window units or electric baseboard heat.

Heat Pumps: Heat pumps handle both heating and cooling from a single system and are a practical choice for Plano homeowners who want year-round efficiency. In a climate where extreme cold is rare but energy costs matter, a modern heat pump often outperforms a traditional gas furnace and AC combo on annual operating costs.

Indoor Air Quality: Newer construction in Plano is built tight for energy efficiency, which traps allergens, dust, and humidity inside. We offer air filtration systems, UV air purifiers, ventilators, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Plano area homeowners.

Duct Cleaning and Duct Repair: Leaky or dirty ductwork is one of the most common causes of uneven temperatures and high energy bills in Plano homes, especially two-story and multi-system properties. We inspect, clean, and seal ductwork throughout Plano and Collin County, and fixing the ducts often makes a bigger difference than replacing the equipment.

Why Plano Homeowners Choose Adon Complete for HVAC Service

Neighborhoods We Serve in Plano, TX

We provide HVAC services throughout Plano, including Legacy West, Windhaven Meadows, Willow Bend, Haggard Park, Ridgeview Ranch, Chase Oaks, and the communities along the Dallas North Tollway corridor. We also serve Plano’s neighboring cities, including Allen, McKinney, Frisco, and Anna. If you’re not sure whether we cover your area, call us, and we’ll let you know.

Schedule HVAC Service in PlanoCall (903) 482-4900

Plano, TX HVAC FAQ

How much does AC repair cost in Plano, TX?

Most AC repairs in Plano run between $150 and $600, depending on the repair type. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs, like a blower motor or evaporator coil, cost more. We give you a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Plano?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Plano and Collin County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC during a Plano summer can’t wait until morning.

My Plano home has two HVAC systems. Can you service both on the same visit?

Yes, and we do it regularly. Many larger Plano homes, particularly those along the DNT corridor and in the Legacy area, run separate systems for the upstairs and downstairs zones. Our technicians can diagnose and service both units in the same appointment, saving time and giving us a complete picture of how the home is performing.

My newer Plano home feels stuffy even though the AC is working fine. What is going on?

Tight construction is usually the culprit. Homes built in Plano’s newer developments are sealed for energy efficiency, which reduces natural air exchange and traps moisture, allergens, and CO2 inside. A whole-home ventilator or ERV brings in fresh outdoor air while recovering the energy you have already spent conditioning the air inside. It is the right fix for stuffy newer construction, and we install them throughout Plano.

What HVAC brands do you service in Plano?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands, but we do not turn down a job because of what brand is on the equipment.

Schedule HVAC Service in Plano, TX Today

Whether you need same-day AC repair, a new system installed, or want to get on a maintenance plan before the heat hits, Adon Complete Air Conditioning and Heating is ready to help. Call us at (903) 482-4900 or click below to schedule. We also serve the surrounding Collin County communities of Allen, McKinney, Wylie, and Anna.

Schedule HVAC Service in PlanoCall (903) 482-4900

Recent Jobs and Reviews in Plano, TX

Rated 4.9 out of 5 stars based on 9 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Plano, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Plano, TX in August 2026.

The most recent job was on August 20, 2026.

Adon Complete Air Conditioning and Heating has completed 81 jobs in Plano, TX in the last 12 months. The first job there was in February 2020.

Job Locations

Jesse V.
Jesse V.
NA
Plano, TX 75074
Skylar M.
Skylar M.
Landlord was having concerns about system not cooling properly. System was replaced last year by a different company. Customer converted garage into 2 more rooms. They took out a 3 ton unit and installed a 5 ton unit. A 5 ton unit is too big for this size of space. The ductwork is very undersized, including the supply plenum. This is causing the system to freeze up because there is not enough airflow over the evaporator coil. Also, with a 5 ton unit the current lineset is too small. The current copper lines cannot carry the refrigerant effectively and is acting as a restriction. Sent estimates to help the current 5 ton system run better. Even with all of the work done, it still might be oversized for the house but this is the best that can be done with current system. Also flue pipe has been taped together. This is very dangerous because harmful gases can leak into the home. Sent estimates to help to replace section that is taped.
Plano, TX 75074
Plano, TX - Landlord was having concerns about system not cooling properly. System was replaced last year by a different company. Customer converted garage into 2 more rooms. They took out a 3 ton unit and installed a 5 ton unit. A 5 ton unit is too big for this size of space. The ductwork is very undersized, including the supply plenum. This is causing the system to freeze up because there is not enough airflow over the evaporator coil. Also, with a 5 ton unit the current lineset is too small. The current copper lines cannot carry the refrigerant effectively and is acting as a restriction. Sent estimates to help the current 5 ton system run better. Even with all of the work done, it still might be oversized for the house but this is the best that can be done with current system. 

Also flue pipe has been taped together. This is very dangerous because harmful gases can leak into the home. Sent estimates to help to replace section that is taped.
Plano, TX - Landlord was having concerns about system not cooling properly. System was replaced last year by a different company. Customer converted garage into 2 more rooms. They took out a 3 ton unit and installed a 5 ton unit. A 5 ton unit is too big for this size of space. The ductwork is very undersized, including the supply plenum. This is causing the system to freeze up because there is not enough airflow over the evaporator coil. Also, with a 5 ton unit the current lineset is too small. The current copper lines cannot carry the refrigerant effectively and is acting as a restriction. Sent estimates to help the current 5 ton system run better. Even with all of the work done, it still might be oversized for the house but this is the best that can be done with current system. 

Also flue pipe has been taped together. This is very dangerous because harmful gases can leak into the home. Sent estimates to help to replace section that is taped.
Skylar M.
Skylar M.
Customer had concerns that system was not keeping up. Indoor and outdoor units are running. Checked filter and it had gotten sucked into blower cabinet. It was restricting airflow. Checked temperature drop across system, 82° return and 62° supply. Checked capacitor and contactor. Contactor is very burnt and pitted, recommended replacing it. Checked refrigerant pressures and superheat. System is cooling at this time. Customer is getting new filter.
Plano, TX 75075
Plano, TX - Customer had concerns that system was not keeping up. Indoor and outdoor units are running. Checked filter and it had gotten sucked into blower cabinet. It was restricting airflow. Checked temperature drop across system, 82° return and 62° supply. Checked capacitor and contactor. Contactor is very burnt and pitted, recommended replacing it. Checked refrigerant pressures and superheat. System is cooling at this time. Customer is getting new filter.
Plano, TX - Customer had concerns that system was not keeping up. Indoor and outdoor units are running. Checked filter and it had gotten sucked into blower cabinet. It was restricting airflow. Checked temperature drop across system, 82° return and 62° supply. Checked capacitor and contactor. Contactor is very burnt and pitted, recommended replacing it. Checked refrigerant pressures and superheat. System is cooling at this time. Customer is getting new filter.
Skylar M.
Skylar M.
No cool on downstairs system. Indoor blower was running but outside was not. Customer had another company out and they had pulled the disconnect. When I plugged it in the breaker tripped right away. Checked compressor and it is shorted to ground. System is out of warranty and AC needs to be replaced because of refrigerant change.
Plano, TX 75023
Plano, TX - No cool on downstairs system. Indoor blower was running but outside was not. Customer had another company out and they had pulled the disconnect. When I plugged it in the breaker tripped right away. Checked compressor and it is shorted to ground. System is out of warranty and AC needs to be replaced because of refrigerant change.
Plano, TX - No cool on downstairs system. Indoor blower was running but outside was not. Customer had another company out and they had pulled the disconnect. When I plugged it in the breaker tripped right away. Checked compressor and it is shorted to ground. System is out of warranty and AC needs to be replaced because of refrigerant change.
Jesse V.
Jesse V.
NA
Plano, TX 75025
Skylar M.
Skylar M.
2 system AC maintenance. Replaced filters provided by customer. Measured temperature drop across systems, both are getting 20° split. Checked operation of drain lines, treated them with drain solution. Measured amp draw on compressor and fan motor. Checked contactor and capacitors on both systems. Capacitor is no good for downstairs system, customer approved replacement. Cleaned condenser coils using water. Both systems are cooling at this time.
Plano, TX 75024
Plano, TX - 2 system AC maintenance. Replaced filters provided by customer. Measured temperature drop across systems, both are getting 20° split. Checked operation of drain lines, treated them with drain solution. Measured amp draw on compressor and fan motor. Checked contactor and capacitors on both systems. Capacitor is no good for downstairs system, customer approved replacement. Cleaned condenser coils using water. Both systems are cooling at this time.
Plano, TX - 2 system AC maintenance. Replaced filters provided by customer. Measured temperature drop across systems, both are getting 20° split. Checked operation of drain lines, treated them with drain solution. Measured amp draw on compressor and fan motor. Checked contactor and capacitors on both systems. Capacitor is no good for downstairs system, customer approved replacement. Cleaned condenser coils using water. Both systems are cooling at this time.
Jesse V.
Jesse V.
NA
Plano, TX 75023
Plano, TX - NA
Plano, TX - NA
Skylar M.
Skylar M.
2 system AC maintenance. Customer is getting filters to replace them on his own. Measured temperature drop across systems, both getting 20° difference. Measured amp draw on blower motors. Checked operation of drain lines, treated them with drain solution. Measured amp draw on compressors and condenser fan motors. Tested capacitors and contactors. Customer decided against the hard start kit on the downstairs system at this time. Cleaned condenser coils using water. System are cooling at this time.
Plano, TX 75024
Plano, TX - 2 system AC maintenance. Customer is getting filters to replace them on his own. Measured temperature drop across systems, both getting 20° difference. Measured amp draw on blower motors. Checked operation of drain lines, treated them with drain solution. Measured amp draw on compressors and condenser fan motors. Tested capacitors and contactors. Customer decided against the hard start kit on the downstairs system at this time. Cleaned condenser coils using water. System are cooling at this time.
Plano, TX - 2 system AC maintenance. Customer is getting filters to replace them on his own. Measured temperature drop across systems, both getting 20° difference. Measured amp draw on blower motors. Checked operation of drain lines, treated them with drain solution. Measured amp draw on compressors and condenser fan motors. Tested capacitors and contactors. Customer decided against the hard start kit on the downstairs system at this time. Cleaned condenser coils using water. System are cooling at this time.
Skylar M.
Skylar M.
No cool on single system. Customer stated they had added refrigerant a couple times and thought it might be low. Set thermostat to cool and went to outdoor unit. Compressor and fan were running but compressor is very loud. Checked refrigerant pressures and system had refrigerant but compressor was not pumping it through the system. Capacitor was good. Compressor has failed. AC system will need to be replaced.
Plano, TX 75023
Plano, TX - No cool on single system. Customer stated they had added refrigerant a couple times and thought it might be low. Set thermostat to cool and went to outdoor unit. Compressor and fan were running but compressor is very loud. Checked refrigerant pressures and system had refrigerant but compressor was not pumping it through the system. Capacitor was good. Compressor has failed. AC system will need to be replaced.
Plano, TX - No cool on single system. Customer stated they had added refrigerant a couple times and thought it might be low. Set thermostat to cool and went to outdoor unit. Compressor and fan were running but compressor is very loud. Checked refrigerant pressures and system had refrigerant but compressor was not pumping it through the system. Capacitor was good. Compressor has failed. AC system will need to be replaced.
Clayton P.
Clayton P.
Upon arrival I found that drain line was clear. Drain line was draining properly. Water was leaking from the sides of the air handler down to the floor due to dirty evaporator coil. A dirty evaporator coil is restricting airflow, causing system to not keep up and producing condensation on the sides of the air handler. System was not keeping up, thermostat read 80° and it was set to 75°. I recommend an evaporator coil cleaning to help the system perform at peak performance. The evaporator coil cleaning that I recommend is a pull and clean, where we pull the evaporator coil from the cabinet and chemically clean it.
Plano, TX 75074
Plano, TX - Upon arrival I found that drain line was clear. Drain line was draining properly. Water was leaking from the sides of the air handler down to the floor due to dirty evaporator coil. A dirty evaporator coil is restricting airflow, causing system to not keep up and producing condensation on the sides of the air handler. System was not keeping up, thermostat read 80° and it was set to 75°.

I recommend an evaporator coil cleaning to help the system perform at peak performance. The evaporator coil cleaning that I recommend is a pull and clean, where we pull the evaporator coil from the cabinet and chemically clean it.
Plano, TX - Upon arrival I found that drain line was clear. Drain line was draining properly. Water was leaking from the sides of the air handler down to the floor due to dirty evaporator coil. A dirty evaporator coil is restricting airflow, causing system to not keep up and producing condensation on the sides of the air handler. System was not keeping up, thermostat read 80° and it was set to 75°.

I recommend an evaporator coil cleaning to help the system perform at peak performance. The evaporator coil cleaning that I recommend is a pull and clean, where we pull the evaporator coil from the cabinet and chemically clean it.

Your High Efficiency

Experts