Menu

Heating and Air Conditioning in Plano, TX

Adon Complete Air Conditioning and Heating has provided HVAC services in Plano, TX, for years, serving Collin County from our home base in Anna, just up Highway 75. Whether your AC quits on a July afternoon, your furnace needs attention before the first cold front, or you are ready to upgrade to a more efficient system, our technicians regularly work in Plano neighborhoods and know the homes here well.

Plano is one of the largest cities we serve, and its homes reflect that. We work on older single-stage systems in established East Plano neighborhoods and modern variable-speed equipment in newer Legacy corridor builds. Many larger homes in Plano run two separate HVAC systems, and we are experienced diagnosing and servicing both in the same visit. We service all makes and models; we are a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we are available 24 hours a day, 7 days a week for emergencies.

Schedule HVAC Service in PlanoCall (903) 482-4900

HVAC Services We Offer in Plano, TX

AC Repair: Same-day AC repair available throughout Plano and Collin County. We diagnose and repair all makes and models, and most calls are resolved in a single visit. When your air conditioning goes out in the Plano heat, we treat it like the emergency it is.

AC Installation and Replacement: When your Plano home needs a new system, we size it correctly using a load calculation and install it to manufacturer specs. All new installations come with up to a 10-year labor warranty. We’ll help you choose the right capacity and efficiency rating for your home, not just the unit that fits the budget.

Heating Repair and Installation: We service gas furnaces, heat pumps, and electric systems throughout Plano. Winters here are mild but the occasional hard freeze is real, and a furnace that won’t fire in January isn’t something you want to wait on. We stock parts for the most common brands and most repairs are done in one visit.

HVAC Maintenance: Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Plano homeowners running two systems, it’s the most practical way to keep both units maintained without scheduling separate visits.

Ductless Mini-Split Systems: Plano’s sunrooms, home offices, garage conversions, and older additions without ductwork are ideal for ductless mini-splits. We install single and multi-zone systems throughout Plano, and they’re significantly more efficient than window units or electric baseboard heat.

Heat Pumps: Heat pumps handle both heating and cooling from a single system and are a practical choice for Plano homeowners who want year-round efficiency. In a climate where extreme cold is rare but energy costs matter, a modern heat pump often outperforms a traditional gas furnace and AC combo on annual operating costs.

Indoor Air Quality: Newer construction in Plano is built tight for energy efficiency, which traps allergens, dust, and humidity inside. We offer air filtration systems, UV air purifiers, ventilators, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Plano area homeowners.

Duct Cleaning and Duct Repair: Leaky or dirty ductwork is one of the most common causes of uneven temperatures and high energy bills in Plano homes, especially two-story and multi-system properties. We inspect, clean, and seal ductwork throughout Plano and Collin County, and fixing the ducts often makes a bigger difference than replacing the equipment.

Why Plano Homeowners Choose Adon Complete for HVAC Service

Neighborhoods We Serve in Plano, TX

We provide HVAC services throughout Plano, including Legacy West, Windhaven Meadows, Willow Bend, Haggard Park, Ridgeview Ranch, Chase Oaks, and the communities along the Dallas North Tollway corridor. We also serve Plano’s neighboring cities, including Allen, McKinney, Frisco, and Anna. If you’re not sure whether we cover your area, call us, and we’ll let you know.

Schedule HVAC Service in PlanoCall (903) 482-4900

Plano, TX HVAC FAQ

How much does AC repair cost in Plano, TX?

Most AC repairs in Plano run between $150 and $600, depending on the repair type. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs, like a blower motor or evaporator coil, cost more. We give you a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Plano?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Plano and Collin County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC during a Plano summer can’t wait until morning.

My Plano home has two HVAC systems. Can you service both on the same visit?

Yes, and we do it regularly. Many larger Plano homes, particularly those along the DNT corridor and in the Legacy area, run separate systems for the upstairs and downstairs zones. Our technicians can diagnose and service both units in the same appointment, saving time and giving us a complete picture of how the home is performing.

My newer Plano home feels stuffy even though the AC is working fine. What is going on?

Tight construction is usually the culprit. Homes built in Plano’s newer developments are sealed for energy efficiency, which reduces natural air exchange and traps moisture, allergens, and CO2 inside. A whole-home ventilator or ERV brings in fresh outdoor air while recovering the energy you have already spent conditioning the air inside. It is the right fix for stuffy newer construction, and we install them throughout Plano.

What HVAC brands do you service in Plano?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands, but we do not turn down a job because of what brand is on the equipment.

Schedule HVAC Service in Plano, TX Today

Whether you need same-day AC repair, a new system installed, or want to get on a maintenance plan before the heat hits, Adon Complete Air Conditioning and Heating is ready to help. Call us at (903) 482-4900 or click below to schedule. We also serve the surrounding Collin County communities of Allen, McKinney, Wylie, and Anna.

Schedule HVAC Service in PlanoCall (903) 482-4900

Recent Jobs and Reviews in Plano, TX

Rated 4.9 out of 5 stars based on 9 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Plano, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Plano, TX between June 2026 and July 2026.

The most recent job was on July 1, 2026.

Adon Complete Air Conditioning and Heating has completed 81 jobs in Plano, TX in the last 12 months. The first job there was in February 2020.

Job Locations

Shelby S.
Shelby S.
Upon arrival, I discovered that the Condenser fan portion of the capacitor has failed causing the motor to not turn on. I wired a capacitor into the system and tested it. The system is back to cooling properly.
Plano, TX 75093
Plano, TX - Upon arrival, I discovered that the Condenser fan portion of the capacitor has failed causing the motor to not turn on. I wired a capacitor into the system and tested it. The system is back to cooling properly.
Plano, TX - Upon arrival, I discovered that the Condenser fan portion of the capacitor has failed causing the motor to not turn on. I wired a capacitor into the system and tested it. The system is back to cooling properly.
Shelby S.
Shelby S.
The drain goes to the washing machine. I plugged it to keep gunk from coming up. Client mentioned that that water came from the floor in her room before approving drain clearing. I advised the client to call a plumber to check the washer drain to ensure it isn’t clogged. I tested the AC drain and removed water from the emergency pan afterwards to ensure it is clear.
Plano, TX 75025
Plano, TX - The drain goes to the washing machine. I plugged it to keep gunk from coming up. Client mentioned that that water came from the floor in her room before approving drain clearing. I advised the client to call a plumber to check the washer drain to ensure it isn’t clogged. I tested the AC drain and removed water from the emergency pan afterwards to ensure it is clear.
Plano, TX - The drain goes to the washing machine. I plugged it to keep gunk from coming up. Client mentioned that that water came from the floor in her room before approving drain clearing. I advised the client to call a plumber to check the washer drain to ensure it isn’t clogged. I tested the AC drain and removed water from the emergency pan afterwards to ensure it is clear.
Jesse V.
Jesse V.
Scope of work 1. Pump remaining refrigerant to the outdoor unit and seal it off 2. Proceed to the attic to remove sealant on the evaporator coil 3. Cut copper lines and pvc drains 4. Remove emergency drain pan 5. Take the old evaporator coil out of the attic 6. Take new evaporator coil into the attic 7. Hang the new evaporator coil 8. Braze the copper lines to the new evaporator coil 9. Seal the evaporator coil with mastic seal and metal tape 10. Install the emergency drain pan and pvc drains to the new evaporator coil 11. Remove the refrigerant filter dryer 12. Braze in new refrigerant filter dryer 13. Pressurize the refrigerant lines with nitrogen to ensure no leaks are present 14. Remove the nitrogen and vacuum the refrigerant lines to remove contamination and none condensables 15. Release the refrigerant back into the system and top it off to the proper charge
Plano, TX 75093
Shelby S.
Shelby S.
I found the system low on R410a approximately 5 pounds with small traces of oil in the primary pan. The evaporator coil is from 2008. I called and got approval from the property manager to get the coil ordered for replacement. Customer is aware of the price change due to refrigerant amount.
Plano, TX 75093
Plano, TX - I found the system low on R410a approximately 5 pounds with small traces of oil in the primary pan. The evaporator coil is from 2008. I called and got approval from the property manager to get the coil ordered for replacement. Customer is aware of the price change due to refrigerant amount.
Plano, TX - I found the system low on R410a approximately 5 pounds with small traces of oil in the primary pan. The evaporator coil is from 2008. I called and got approval from the property manager to get the coil ordered for replacement. Customer is aware of the price change due to refrigerant amount.
Shelby S.
Shelby S.
The upstairs units ducts are full of growth, the plenum is oversized causing a static pressure issue, and the upstairs outdoor unit needs a deep chemical cleaning(discounted). There are vents that need to be cleaned that are approximately 18” to 20” high. We will need a 12ft to 14ft tall ladder. The upstairs has return cavities that turn into ducts in the attic. We will need to replace the plenum, install existing duct work, and ApcoX. The job was financed and was scheduled for the 25th 8am arrival time. ALL WORK IS FOR UPSTAIRS.
Plano, TX 75025
Plano, TX - The upstairs units ducts are full of growth, the plenum is oversized causing a static pressure issue, and the upstairs outdoor unit needs a deep chemical cleaning(discounted). There are vents that need to be cleaned that are approximately 18” to 20” high. We will need a 12ft to 14ft tall ladder. The upstairs has return cavities that turn into ducts in the attic. We will need to replace the plenum, install existing duct work, and ApcoX. The job was financed and was scheduled for the 25th 8am arrival time. ALL WORK IS FOR UPSTAIRS.
Plano, TX - The upstairs units ducts are full of growth, the plenum is oversized causing a static pressure issue, and the upstairs outdoor unit needs a deep chemical cleaning(discounted). There are vents that need to be cleaned that are approximately 18” to 20” high. We will need a 12ft to 14ft tall ladder. The upstairs has return cavities that turn into ducts in the attic. We will need to replace the plenum, install existing duct work, and ApcoX. The job was financed and was scheduled for the 25th 8am arrival time. ALL WORK IS FOR UPSTAIRS.
Shelby S.
Shelby S.
Upon arrival, I found the downstairs condenser making an awful noise. I discovered that the condenser fan motor is locked up and went over options to address this issue. The compressor may have sustained damage by the noise the unit was making. It sounds like an electrical arch. I informed her that the equipment is 14 years old. The customer opted to have our comfort specialist come out and go over condenser/evap coil options. These units will need a supply plenum.
Plano, TX 75025
Plano, TX - Upon arrival, I found the downstairs condenser making an awful noise. I discovered that the condenser fan motor is locked up and went over options to address this issue. The compressor may have sustained damage by the noise the unit was making. It sounds like an electrical arch. I informed her that the equipment is 14 years old. The customer opted to have our comfort specialist come out and go over condenser/evap coil options. These units will need a supply plenum.
Plano, TX - Upon arrival, I found the downstairs condenser making an awful noise. I discovered that the condenser fan motor is locked up and went over options to address this issue. The compressor may have sustained damage by the noise the unit was making. It sounds like an electrical arch. I informed her that the equipment is 14 years old. The customer opted to have our comfort specialist come out and go over condenser/evap coil options. These units will need a supply plenum.
Shelby S.
Shelby S.
I installed the new blower motor and tested it to ensure proper operation. Also, I needed to replace the capacitor from a 7.5 to a 10 per the motor. The customer asked for me to treat the drain. I treated it and informed her that we will likely need to clear it. We agreed on giving it a week to see if it stops dripping before unclogging it. I generated an estimate and sent it over. The system is cooling upon departure.
Plano, TX 75025
Plano, TX - I installed the new blower motor and tested it to ensure proper operation. Also, I needed to replace the capacitor from a 7.5 to a 10 per the motor. The customer asked for me to treat the drain. I treated it and informed her that we will likely need to clear it. We agreed on giving it a week to see if it stops dripping before unclogging it. I generated an estimate and sent it over. The system is cooling upon departure.
Plano, TX - I installed the new blower motor and tested it to ensure proper operation. Also, I needed to replace the capacitor from a 7.5 to a 10 per the motor. The customer asked for me to treat the drain. I treated it and informed her that we will likely need to clear it. We agreed on giving it a week to see if it stops dripping before unclogging it. I generated an estimate and sent it over. The system is cooling upon departure.
Clever M.
Clever M.
Completed 1 system cooling tune up. Found flue pipe came apart. Provided quote for replacement and temporarily reattached pipe. Pics uploaded. Checked all critical components. Tested motor amp draw, capacitor, contactor, replaced filter and washed outside condenser. Found dust in plenums and duct work, system in need of cleaning. Provided estimates for repairs and cleaning, customer will consider and get back to us.
Plano, TX 75075
Plano, TX - Completed 1 system cooling tune up. Found flue pipe came apart. Provided quote for replacement and temporarily reattached pipe. Pics uploaded. Checked all critical components. Tested motor amp draw, capacitor, contactor, replaced filter and washed outside condenser. Found dust in plenums and duct work, system in need of cleaning. Provided estimates for repairs and cleaning, customer will consider and get back to us.
Plano, TX - Completed 1 system cooling tune up. Found flue pipe came apart. Provided quote for replacement and temporarily reattached pipe. Pics uploaded. Checked all critical components. Tested motor amp draw, capacitor, contactor, replaced filter and washed outside condenser. Found dust in plenums and duct work, system in need of cleaning. Provided estimates for repairs and cleaning, customer will consider and get back to us.
Brayden W.
Brayden W.
1. Visually inspected condenser coil for leaks and abnormalities. 2. Inspected condenser fan motor, blades and bearings. 3. Inspected, cleaned, and, tightened wiring connections. 4. Measured capacitance of compressor/fan motor capacitor. 5. Inspected and measured resistance of contactor 6. Measured compressor current draw. 7. Measured condenser fan motor amp draw. 8. Inspected and replaced return filter. 9. Inspected return plenum for dust or debris. 10. Inspected evaporator coil for cleanliness and oxidation. 11. Inspected blower motor/ blower wheel for dust and debris 12. Measured blower motor current draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested drain lines for proper drainage and treated to prevent blockages. 15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. Everything working well with system. Only concerns is the amount of dust and debris in the return plenum. A
Plano, TX 75023
Plano, TX - 1.  Visually inspected condenser coil for leaks and abnormalities.
2. Inspected condenser fan motor, blades and bearings.
3. Inspected, cleaned, and, tightened wiring connections.
4. Measured capacitance of  compressor/fan motor capacitor.
5. Inspected and measured resistance of contactor
6. Measured compressor current draw.
7. Measured condenser fan motor amp draw.
8. Inspected and replaced return filter.
9. Inspected return plenum for dust or debris.
10. Inspected evaporator coil for cleanliness and oxidation.
11. Inspected blower motor/ blower wheel for dust and debris
12. Measured blower motor current draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested drain lines for proper drainage and treated to prevent blockages.
15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris.

Everything working well with system. Only concerns is the amount of dust and debris in the return plenum. A
Plano, TX - 1.  Visually inspected condenser coil for leaks and abnormalities.
2. Inspected condenser fan motor, blades and bearings.
3. Inspected, cleaned, and, tightened wiring connections.
4. Measured capacitance of  compressor/fan motor capacitor.
5. Inspected and measured resistance of contactor
6. Measured compressor current draw.
7. Measured condenser fan motor amp draw.
8. Inspected and replaced return filter.
9. Inspected return plenum for dust or debris.
10. Inspected evaporator coil for cleanliness and oxidation.
11. Inspected blower motor/ blower wheel for dust and debris
12. Measured blower motor current draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested drain lines for proper drainage and treated to prevent blockages.
15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris.

Everything working well with system. Only concerns is the amount of dust and debris in the return plenum. A
Shelby S.
Shelby S.
The noise is coming from the added air flow from cleaning the system. This is resulting in a slight rattle at the supply grills. I addressed the one in the bedroom to show them what was causing the noise. Customer stated they wanted to address the other themselves. I collected my dispatch for the call.
Plano, TX 75023

Your High Efficiency

Experts