Adon Complete Air Conditioning and Heating has been providing HVAC service in Sherman, TX, for years from our home base in Anna, just down Highway 75. Whether your AC goes out in July, your furnace won’t fire up in January, or you’re looking to upgrade to a more efficient system before the next season hits, our technicians are running calls in Sherman every week.
We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week for emergencies. Whether you’re in Heritage Ranch, Canyon Creek, Westwood Village, or one of the established neighborhoods near the Grayson County Courthouse, we know this area and we’re ready to help.
HVAC Services We Offer in Sherman
We handle everything heating and cooling for Sherman homeowners and businesses. Here’s what we do:
AC Repair. Same-day service available throughout Sherman and Grayson County. We diagnose and repair all makes and models, and the majority of our calls are resolved in a single visit.
AC Installation. When it’s time for a new system, we size it correctly using a proper load calculation and install it in accordance with the manufacturer’s specifications. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. It’s the smartest way to protect your system before the heat hits.
Mini-Split Installation. Ductless systems for rooms, additions, or whole-home comfort without ductwork. We install single- and multi-zone systems throughout Sherman and surrounding Grayson County communities.
Heat Pump Installation and Repair. Heat pumps provide both heating and cooling from a single system. This is a practical choice for Sherman homeowners who want year-round efficiency without separate units.
Indoor Air Quality. Air filtration systems, UV purifiers, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Sherman area homeowners.
Air Duct Cleaning. Professional duct cleaning removes allergens, dust, and debris from your system, improving air quality throughout your home.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Sherman and Grayson County.
Why Sherman Homeowners Choose Adon Complete
- We’re close by. We’re based in Anna, TX, a short drive down Highway 75. Our technicians are in Sherman neighborhoods regularly and know the homes and properties on both sides of US-75.
- Owner Jesse Villarreal has over 27 years of HVAC experience. When you call Adon Complete, you’re not calling a franchise call center. You’re calling a local company where the owner is actively involved and his reputation is on the line with every job.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. That means factory-trained installation and the full manufacturer warranty on every system we install. Not every HVAC contractor serving Sherman can say that.
- We service everything. Whatever brand you have, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. It’s the most affordable way to keep your system reliable year-round.
AC and Heating Service Throughout Sherman and Grayson County
We service every neighborhood in Sherman including Heritage Ranch, Westwood Village, Canyon Creek, Parkhaven, O’Hanlon Ranch, and the established neighborhoods around downtown and the Grayson County Courthouse area. We also serve the surrounding Grayson County communities of Denison, Van Alstyne, Gunter, Howe, Tom Bean, Pottsboro, and Whitesboro.
Sherman HVAC FAQ
Here are some common questions we get.
How much does AC repair cost in Sherman, TX?
Most AC repairs in Sherman run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs like a blower motor or evaporator coil replacement will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Sherman?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Sherman and Grayson County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC in a Sherman summer is not something that can wait until morning.
What HVAC brands do you service in Sherman?
We service all makes and models including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands specifically, but we won’t turn down a job because of the brand on the equipment.
Do you offer HVAC maintenance plans in Sherman?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. It’s the most affordable way to keep your system running reliably through Grayson County’s hot summers and cold winters.
What areas of Sherman do you serve?
We serve all of Sherman and the surrounding Grayson County communities including McKinney, Anna, Van Alstyne, Denison, Gunter, Howe, and Tom Bean.
Schedule HVAC Service in Sherman Today
Whether you need same-day AC repair, a new system installed, or just want to get on a maintenance plan before the heat hits, we’re ready to help. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Sherman, TX
Sherman, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Sherman, TX between April 2025 and May 2025.
The most recent job was on May 8, 2025.
Adon Complete Air Conditioning and Heating has completed 138 jobs in Sherman, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Found contactor engaged when calling for cooling, but compressor and fan were not operating. Found dead bugs mashed inside contactor. Tested contactor and found inconsistent reading. Replaced contactor and unit began cooling normally.
Arrived at home for a duct cleaning estimate. Our clients are in the process of cleaning and painting and wanted the ducts cleaned before moving forward with projects. I inspected the blower motor and wheel and our client elected to clean that himself. We are scheduled to preform the service Friday afternoon at 1pm.
Customer stated it was warm on the master bedroom side of the house. I found the thermostat set to heat and a schedule set up on the other thermostat. I set both thermostats to maintain a range permanently to the customers preference. Both air handlers had dirty air effects filters and dirty blower wheels contributing to high amps on both units. 20° temp split measured on both units. Both outdoor units had high star amps. Both contactors and capacitors were testing with range. Washed both outdoor units to promote heat exchange and keep systems alive. Recommendations: Two blower wheel cleanings Two clean air effects filter cleanings
Started inspection on studio unit. Upon initial inspection, noticed that the filters were not a good fit. Recommended a customer using Honeywell filters as they will not allow as much dust past. I was starting to notice some accumulation of dust on the blower wheel likely due to the filter situation. Unit may need blower wheel cleaning in the future. Measured a 20° split between supply and return as expected. At the outdoor unit start and run amps for testing within range. wash condenser coils to promote heat exchange as they were pretty dirty. Everything operating normally. Proceeding to the main house unit, I changed the filter and tested the start and run amps on the blower motor. Amps were testing in range and I measured a 20° split from the supply and return as expected. Proceeding to condenser I tested the contactor and capacitor. Both were testing within range. I however did find this condenser start amps to be high which will put undue wear and tear on the unit. I would recomme
Performed single system cooling maintenance. The system is a comfort maker(carrier) heat pump from 2021. I investigated an air flow issue that was brought to my attention. The master bedroom is not cooling as well as the rest of the home. The system does not currently have dampers in place. Dampers would allow us to control the flow of air to more specific areas. The air handler is forming growth inside of the unit. If this is left unaddressed, the growth will get worse, stain the inside of the unit, and cause smells inside of the home. I provided pricing for a u/v stick to sterilize the inside of the unit. The capacitor on the outdoor unit is out of range per manufacture specifications. It is rated +/-6% on a 45 rating. It is currently pulling 42.2 and that is slightly under the rated reading. I provided options for a generic and upgraded capacitor. The customer mentioned excessive dust inside of the home. I presented the air scrubber audio book and pricing.
Performed single system cooling maintenance. I checked amps, capacitors, filter, electrical, drains, safeties, cleanliness, refrigerant, and temperature differential. The system is cooling to manufacture specifications with some issues ranging from minor to major. The system currently does not have a water safety switch. This leaves the equipment in danger of flooding the floor and deck it is sitting on. The blower wheel has a notable amount of dust present on it. This results in the motor bearings wearing at an accelerated rate. The unit is in danger and falling through the deck it sits on from past water damage. The current deck is made of particle board and is very porous. It has began to warp and sag. I requested a price to redo the decking.
Performed a 1 system spring maintenance ( AC/GAS). Tasks performed. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked refrigerant pressures. 7. Checked compressor amp draw. 8. Checked condenser fan motor amp draw. 9. Inspected / replaced return filter. 10. Inspected return plenum for debris/ dirty. 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel,,,,blower motor/ wheel are very dirty!!!,, highly recommend a blower cleaning. 13. Checked blower amp draw. 14. Measured temperature differential . 15. Inspected drain lines,,,, there’s no water safety switch installed, highly recommend to install. 16. Washed condenser unit.
Performed 2 system cooling maintenance. I checked amps, drains, cleanliness, electrical, safeties, refrigerant temperature, and temperature split. I installed 2 surge protectors on the outdoor units. I tested the systems to ensure they worked properly after installation. Also, I provided pricing to perform chemical cleanings. System are performing inside of manufacture specifications.
Performed a 2 system spring maintenance ( gas). Tasks performed. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor,, both units don’t have surge protector to prevent over current,, recommended to install them. 6. Checked refrigerant pressures. 7. Checked compressor amp draw. 8. Checked condenser fan motor amp draw. 9. Inspected / replaced return filter. 10. Inspected return plenum for debris/ dirty. 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel. 13. Checked blower amp draw. 14. Measured temperature differential . 15. Inspected drain lines. 16. Washed condenser unit. Found no issues/ concerns at this time.
I returned today to preform a blower wheel cleaning service. I first began by placing and running the air advice monitoring machine in the home. Once set I proceeded into the attic to remove the blower assembly. I took pictures of before and after the cleaning and once completed I installed the assembly back into the unit. I tested the unit to ensure everything was working properly and saw a small reduction in the motor amps. After showing Mrs. Smith the pictures we discussed renewing the card on file for her maintenance agreement. I collected the new card information and sent over all the pictures from today’s service. The unit is running properly on departure.

