Adon Complete Air Conditioning and Heating has been providing HVAC service in Sherman, TX, for years from our home base in Anna, just down Highway 75. Whether your AC goes out in July, your furnace won’t fire up in January, or you’re looking to upgrade to a more efficient system before the next season hits, our technicians are running calls in Sherman every week.
We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week for emergencies. Whether you’re in Heritage Ranch, Canyon Creek, Westwood Village, or one of the established neighborhoods near the Grayson County Courthouse, we know this area and we’re ready to help.
HVAC Services We Offer in Sherman
We handle everything heating and cooling for Sherman homeowners and businesses. Here’s what we do:
AC Repair. Same-day service available throughout Sherman and Grayson County. We diagnose and repair all makes and models, and the majority of our calls are resolved in a single visit.
AC Installation. When it’s time for a new system, we size it correctly using a proper load calculation and install it in accordance with the manufacturer’s specifications. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. It’s the smartest way to protect your system before the heat hits.
Mini-Split Installation. Ductless systems for rooms, additions, or whole-home comfort without ductwork. We install single- and multi-zone systems throughout Sherman and surrounding Grayson County communities.
Heat Pump Installation and Repair. Heat pumps provide both heating and cooling from a single system. This is a practical choice for Sherman homeowners who want year-round efficiency without separate units.
Indoor Air Quality. Air filtration systems, UV purifiers, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Sherman area homeowners.
Air Duct Cleaning. Professional duct cleaning removes allergens, dust, and debris from your system, improving air quality throughout your home.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Sherman and Grayson County.
Why Sherman Homeowners Choose Adon Complete
- We’re close by. We’re based in Anna, TX, a short drive down Highway 75. Our technicians are in Sherman neighborhoods regularly and know the homes and properties on both sides of US-75.
- Owner Jesse Villarreal has over 27 years of HVAC experience. When you call Adon Complete, you’re not calling a franchise call center. You’re calling a local company where the owner is actively involved and his reputation is on the line with every job.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. That means factory-trained installation and the full manufacturer warranty on every system we install. Not every HVAC contractor serving Sherman can say that.
- We service everything. Whatever brand you have, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. It’s the most affordable way to keep your system reliable year-round.
AC and Heating Service Throughout Sherman and Grayson County
We service every neighborhood in Sherman including Heritage Ranch, Westwood Village, Canyon Creek, Parkhaven, O’Hanlon Ranch, and the established neighborhoods around downtown and the Grayson County Courthouse area. We also serve the surrounding Grayson County communities of Denison, Van Alstyne, Gunter, Howe, Tom Bean, Pottsboro, and Whitesboro.
Sherman HVAC FAQ
Here are some common questions we get.
How much does AC repair cost in Sherman, TX?
Most AC repairs in Sherman run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs like a blower motor or evaporator coil replacement will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Sherman?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Sherman and Grayson County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC in a Sherman summer is not something that can wait until morning.
What HVAC brands do you service in Sherman?
We service all makes and models including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands specifically, but we won’t turn down a job because of the brand on the equipment.
Do you offer HVAC maintenance plans in Sherman?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. It’s the most affordable way to keep your system running reliably through Grayson County’s hot summers and cold winters.
What areas of Sherman do you serve?
We serve all of Sherman and the surrounding Grayson County communities including McKinney, Anna, Van Alstyne, Denison, Gunter, Howe, and Tom Bean.
Schedule HVAC Service in Sherman Today
Whether you need same-day AC repair, a new system installed, or just want to get on a maintenance plan before the heat hits, we’re ready to help. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Sherman, TX
Sherman, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Sherman, TX between November 2024 and December 2024.
The most recent job was on December 3, 2024.
Adon Complete Air Conditioning and Heating has completed 138 jobs in Sherman, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Customer would like to hold off on duct cleaning because she plans on demolishing walls inside of the home. The system has hard pipe duct work. The bearings are worn out on both the inducer and blower motor. Customer would like pricing on installing an attic ladder and to have all work done at one time for one processed payment. I informed the customer to give us until the end of the week to send her over pricing if we are willing to install an attic ladder.
Performed system maintenance everything running as it should notice a little buildup of debris and dirt upon fan motor & coil. Recommend pulling and clean blower wheel & cleaning evaporator coil in place. Was also able to hang 2/ducts behind system for better airflow to accommodate homeowner satisfaction.
Performed visual and operational inspection of HVAC system and found the unit performing according to manufacturer’s specs. However, the master bedroom seems to cool faster than the rest of the house due to distance from the thermostat and three exterior walls. I rebalanced the air flow throughout the home and instructed the homeowner to set their thermostat to circulate every 15-30 to increase air circulation to the home and level out temperature.
Found system clogged with water backed up into the inducer. System is a 2007 90% furnace. Unhooked hoses for the inducer and clear the drain. Attached pictures of clog location. Flushed drain with 1 gallon of water. Cycled the system multiple times to ensure inducer was clear and working properly.
Upon arrival noticed outdoor condenser short cycling on and off. Checked panel inside condenser and the red LED flashes9 times giving off a low super heat in cooling mode. Indoor TXV stuck open or ID fan failur. Upon further investigation, or TXB failure to properly open and closed when energized in heat. Causing the outdoor unit to short cycle while in heating Need to replace in indoor TXV.
Installed new dome sensor and tested the unit. System is fully operational
Item is used to lower decibels of the compressor upon start up and while running Performed single system heating maintenance. Checked amps, filters, refrigerant, electrical, and safeties. Sensor does not have enough good wire to attempt to patch it. Installed new compressor jacket
Found the old thermostat set to 60 with it being 76 in the house. Gave a demonstration of how the thermostat operates. Cycled the unit multiple times with the thermostat and system started every time.
Found system full of growth and leaking refrigerant. System is from 2006 and is a heat pump. Access hole is too small to replace unit. We will either need a bigger access or relocate the unit.
Performed 2 system heating maintenance. One system is a heat pump from 2020. The other is a zoned gas furnace from 2023. Checked amps, capacitor, filters, electrical, cleanliness, and safeties. Systems are performing to manufacture specifications.

