Adon Complete Air Conditioning and Heating has been providing HVAC service in Sherman, TX, for years from our home base in Anna, just down Highway 75. Whether your AC goes out in July, your furnace won’t fire up in January, or you’re looking to upgrade to a more efficient system before the next season hits, our technicians are running calls in Sherman every week.
We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week for emergencies. Whether you’re in Heritage Ranch, Canyon Creek, Westwood Village, or one of the established neighborhoods near the Grayson County Courthouse, we know this area and we’re ready to help.
HVAC Services We Offer in Sherman
We handle everything heating and cooling for Sherman homeowners and businesses. Here’s what we do:
AC Repair. Same-day service available throughout Sherman and Grayson County. We diagnose and repair all makes and models, and the majority of our calls are resolved in a single visit.
AC Installation. When it’s time for a new system, we size it correctly using a proper load calculation and install it in accordance with the manufacturer’s specifications. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. It’s the smartest way to protect your system before the heat hits.
Mini-Split Installation. Ductless systems for rooms, additions, or whole-home comfort without ductwork. We install single- and multi-zone systems throughout Sherman and surrounding Grayson County communities.
Heat Pump Installation and Repair. Heat pumps provide both heating and cooling from a single system. This is a practical choice for Sherman homeowners who want year-round efficiency without separate units.
Indoor Air Quality. Air filtration systems, UV purifiers, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Sherman area homeowners.
Air Duct Cleaning. Professional duct cleaning removes allergens, dust, and debris from your system, improving air quality throughout your home.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Sherman and Grayson County.
Why Sherman Homeowners Choose Adon Complete
- We’re close by. We’re based in Anna, TX, a short drive down Highway 75. Our technicians are in Sherman neighborhoods regularly and know the homes and properties on both sides of US-75.
- Owner Jesse Villarreal has over 27 years of HVAC experience. When you call Adon Complete, you’re not calling a franchise call center. You’re calling a local company where the owner is actively involved and his reputation is on the line with every job.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. That means factory-trained installation and the full manufacturer warranty on every system we install. Not every HVAC contractor serving Sherman can say that.
- We service everything. Whatever brand you have, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. It’s the most affordable way to keep your system reliable year-round.
AC and Heating Service Throughout Sherman and Grayson County
We service every neighborhood in Sherman including Heritage Ranch, Westwood Village, Canyon Creek, Parkhaven, O’Hanlon Ranch, and the established neighborhoods around downtown and the Grayson County Courthouse area. We also serve the surrounding Grayson County communities of Denison, Van Alstyne, Gunter, Howe, Tom Bean, Pottsboro, and Whitesboro.
Sherman HVAC FAQ
Here are some common questions we get.
How much does AC repair cost in Sherman, TX?
Most AC repairs in Sherman run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs like a blower motor or evaporator coil replacement will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Sherman?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Sherman and Grayson County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC in a Sherman summer is not something that can wait until morning.
What HVAC brands do you service in Sherman?
We service all makes and models including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands specifically, but we won’t turn down a job because of the brand on the equipment.
Do you offer HVAC maintenance plans in Sherman?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. It’s the most affordable way to keep your system running reliably through Grayson County’s hot summers and cold winters.
What areas of Sherman do you serve?
We serve all of Sherman and the surrounding Grayson County communities including McKinney, Anna, Van Alstyne, Denison, Gunter, Howe, and Tom Bean.
Schedule HVAC Service in Sherman Today
Whether you need same-day AC repair, a new system installed, or just want to get on a maintenance plan before the heat hits, we’re ready to help. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Sherman, TX
Sherman, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Sherman, TX in October 2024.
The most recent job was on October 24, 2024.
Adon Complete Air Conditioning and Heating has completed 138 jobs in Sherman, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Performed single system heating maintenance. Checked amps, capacitor, filter, cleanliness, electrical, flame sensor, igniter, and safeties. System is heating to manufacture specifications. Suggestion 1. Performing a drain treatment to ensure it is clear.
Came back out with manger. After going over system found that the outside temp suction sensor is bad. Checked warranty system is out of the 5 year manufacture warranty. Need to order part. Thank you for your time.
Will need to reach out to the engineer for specifics on the supplies and return grill locations. Thermostat relocation is doable. Mitch will reach out tomorrow.
Came out for no cool, Upon arrival tstat had error code 82 suction temp lockout. Reset system and turned heating to 80 system went from 75 to 80 with no error codes. System cycles off no issues at this time told customer to call if issues occurs again. Thank you for your time.
Came out for a 1 system maintenance on a upflow straight electric system. Our install back in may. Upon arrival customer stated that when they first turned heat on system made a click sound when shutting off and was humming customer has video of noise. I started by turning heat on and no noise present at this time cycled system still no noise. Let customer know if issues persist to call us. Heat kit is operating within manufacture specifications all electrical components are operating as designed. Evap coil clean changed out 20x24x2 filter that customer provided. Recommend adding pan treatment into system to keep drain lines clear. On outside unit recommend adding hard start kit to help when start up and to increase efficiency and longevity of compressor. Thank you for your time.
Main part of the house 1. Second floor total ductWork replacements 2. Ductwork boots and grills First floor main living 1. From the main attic run ductwork through a chase all the way down to the basement. 2. Basement run spiral ductwork through and under the living room floor to receive three Supply. Total of supply 3 under floor. 3. Will be using cables to secure the spiral pipe in the basement area 4. Main living room there are two supplies duct will be increased to 10 inch (Location very close by the ceiling) 5. Ductwork for the living room, connected to the kitchen. Ductwork will be ran from the second floor, using part of the closet corner. 6. Ductwork for kitchen will be using a corner of the closet. 7. Ductwork for the front office will be using a corner to chase down ductwork. Air returns 1. Second floor all bedrooms will have air returns 2. Main living will have returned above the stairwell area. 16 inch of ductwork Control wires 1. Run new control wire to indoor unit to
Fall PM- Checked: blower motor and wheel, electrical wiring and connections, limit switches and safety controls, airflow, filters, temperature rise, thermostat, amp draws, capacitor, gas line and connections, (no gas leaks), gas flow, burners, orifices, ignitor, heat exchangers, and flame quality. The flame sensor was cleaned.
Came out for fall maintenance on 5 month old install trane gas system. Upon arrival started by checked sequence of operation on heating elements. All components are clean and operating as designed. Insulation is low and needs to be addressed. Recommend adding surge protection to protect system. Looked over outside unit coils clean all components are operating as designed. Recommend adding compressor savor on outside unit to increase efficiency and longevity of unit. Thank you for your time.
Fall PM- Checked: blower motor and wheel, electrical wiring and connections, limit switches and safety controls, airflow, filters, temperature rise, thermostat, amp draws, capacitor, gas line and connections, (no gas leaks), gas flow, burners, orifices, ignitor, heat exchangers, and flame quality. The flame sensor was cleaned. Found safety switch on blower not connected and the wires were tied together Drain line, clogged and drain pan had water in it I recommend replacing the blower safety and clearing drain line and vacuuming the drain pan
Fall PM- Checked: blower motor and wheel, electrical wiring and connections, limit switches and safety controls, airflow, filters, temperature rise, thermostat, amp draws, capacitor, gas line and connections, (no gas leaks), gas flow, burners, orifices, ignitor, heat exchangers, and flame quality. The flame sensor was cleaned. recommend algae treatment and surge protection

