Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in August 2026.
The most recent job was on August 28, 2026.
Adon Complete Air Conditioning and Heating has completed 587 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
No cool on zoned system. Customer noticed yesterday that outside unit was running for a few seconds and then shutting off for a few. Set both thermostats to cool. Zone board showed that both zones were calling for air. Not able to feel any air coming from downstairs vents. Found that damper motor had gotten stuck closed. When this happened and the only zone that was calling was downstairs, the cold air had nowhere to go and eventually froze the coil. This caused the unit to short cycle and kept shutting off on low pressure. Once both dampers were open, checked refrigerant pressures. System is a little low on refrigerant as well. Let customer know we can either add refrigerant and see if it hold or perform a leak search as well to know for sure. Customer needs to get work approved by home warranty company before we can proceed.
One system AC maintenance. Replaced filter provided by customer. Measure temperature drop across system. Checked operation of drain line, treated it with drain solution. Measured amp draw on blower motor. Next, went outside to condenser. Measured amp draw on compressor and fan motor. System already has hard start kit, it is still good. Checked contactor and capacitor. Contactor is showing signs of pitting and burn marks, recommended replacing it. Customer declined repair at this time. Clean condenser coil using water. System is cooling at this time.
Arrive for one system AC maintenance. Replaced filter in grill provided by the customer. Measure temperature drop across system, getting 19° difference. Evaporator coil and blower wheel were cleaned earlier this year. Checked operation of drain lines, and treated them with drain solution. Next, went outside to condenser. Measured an amp draw on compressor and fan motor. Checked contactor and capacitor. Both are within acceptable range and are not damaged. Clean condenser coil using water. System is cooling at this time.
Replaced damper motor and wired it to zone board. Tested system with damper closed and open. Damper is working properly now. Customer stated that outside drain is dripping still. Drain line is completely clear. Water is not making its way into the drain openings. Took coil door off and checked for blockages. There is nothing stopping the water from flowing through drain. Noticed that water is pooling up on far left side of coil in the middle of the pan. The primary drain pan is warped which is causing water to build up and eventually go over the side of the drain pan instead of through drain. Primary drain pan will need to be replaced.
HVAC Evaluation & Comfort Assessment Modular Home – Sunroom / Patio Addition During today’s HVAC evaluation, we performed a detailed assessment of the home’s comfort conditions and investigated why the primary HVAC system is struggling to maintain the desired indoor temperature. Existing Home & Sunroom Conditions The residence is a modular home with an enclosed patio/sunroom addition that was constructed adjacent to the original structure. The home’s primary HVAC system was not originally designed or connected to condition the sunroom addition. The sunroom currently does not have a dedicated heating and cooling system. This is especially important because the sunroom has a significant amount of glass exposure: * Three walls of the sunroom consist primarily of windows. * Two major sides of the room have west and south exposure. * These exposures receive a substantial amount of direct sunlight throughout the day. * The large amount of glass allows significant solar heat to enter a
Removed old faulty fan motor. Replaced with oem warranty motor. Powered system on and tested operation. Amp draw on fan motor is within acceptable range. Supply air is 55°. System is cooling at this time.
Replaced Honeywell damper motor. Removed damper that was backwards and installed it the correct way. Tested damper closed and open. System is cooling at this time. Sealed coil plenum connection complimentary.
Arrive for no cool. Customer noticed yesterday that system was not cooling. He said that the fan outside was running but didn’t think the compressor was. Customer powered off unit for a while and when we turned it back on it has been running ever since. Checked capacitor and it was good, we replaced it last year. Measured amp draw on fan motor and compressor. Condenser coil is covered with a layer of dirt and debris. System could have over heated and shut off on high pressure and turned back on once it cooled down. Customer said he is going to clean condenser on his own. System is cooling at this time.
Customer was having issues with water dripping outside from secondary drain line. Primary drain line is clogged up and causing water to drip into secondary drain pan. Cleared drain line using nitrogen and poured water down it to verify it was clear. Customer also had concerns about downstairs not getting cold like upstairs is when they are set on the same temperature. Single zoned system. Found that damper motor for downstairs was stuck closed and would not open. Was able to get it forced open but it will need to be replaced to function properly. System is cooling at this time.
went out to provide an estimate for duct cleaning, located 52 grilles. We will need to come on a Sunday. would need panduit and mastic. Office to work on pricing and email it out.

