Menu

Heating and Air Conditioning Services in Anna, TX

Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.

Schedule Service in AnnaCall (903) 482-4900

HVAC Services in Anna, TX

Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:

AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.

AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.

Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.

Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.

Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.

Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.

Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.

HVAC Services for Anna’s Growing Neighborhoods

Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.

For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.

Why Anna Homeowners Choose Adon Complete

Schedule Service in AnnaCall (903) 482-4900

Frequently Asked Questions

Here are some answers to common questions we get about our Anna HVAC services.

How much does AC repair cost in Anna, TX?

Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Anna?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.

What HVAC brands do you service in Anna?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.

Do you offer HVAC maintenance plans in Anna?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.

What areas near Anna do you serve?

We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.

Schedule HVAC Service in Anna Today

We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in AnnaCall (903) 482-4900

Recent Jobs and Reviews in Anna, TX

Rated 4.9 out of 5 stars based on 67 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Anna, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX between July 2026 and August 2026.

The most recent job was on August 6, 2026.

Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.

Job Locations

Clayton P.
Clayton P.
Performed one system maintenance and found start capacitor at outdoor unit reading 39 out of 40. Found no other issues, system is running properly at this time. Left estimate for warranty start capacitor, homeowner opted to wait to replace this. Drain line was clear.
Anna, TX 75409
Anna, TX - Performed one system maintenance and found start capacitor at outdoor unit reading 39 out of 40. Found no other issues, system is running properly at this time.

Left estimate for warranty start capacitor, homeowner opted to wait to replace this. 

Drain line was clear.
Anna, TX - Performed one system maintenance and found start capacitor at outdoor unit reading 39 out of 40. Found no other issues, system is running properly at this time.

Left estimate for warranty start capacitor, homeowner opted to wait to replace this. 

Drain line was clear.
Skylar M.
Skylar M.
No cool on single system. Set thermostat to cool and indoor blower motor started running. Checked condenser and nothing was happening. Getting 24v at contactor. Found that capacitor had failed. Replaced contactor and checked operation of system after repair. System is cooling at this time.
Anna, TX 75409
Anna, TX - No cool on single system. Set thermostat to cool and indoor blower motor started running. Checked condenser and nothing was happening. Getting 24v at contactor. Found that capacitor had failed. Replaced contactor and checked operation of system after repair. System is cooling at this time.
Anna, TX - No cool on single system. Set thermostat to cool and indoor blower motor started running. Checked condenser and nothing was happening. Getting 24v at contactor. Found that capacitor had failed. Replaced contactor and checked operation of system after repair. System is cooling at this time.
Shelby S.
Shelby S.
I performed a single cooling maintenance on a 2014 heat pump system. I checked amps, capacitors, filters, electrical, cleanliness, drains, and safeties. During my thorough evaluation, I discovered a couple of issues. The low voltage wire is becoming exposed and will end up shorting out. The blower motor has enough build up to cause damage to the motor and needs to be cleaned. The evaporator coil could use some cleaning. The system is not cooling as efficiently as it can due to oxidation. I presented options to address these concerns during the time of service.
Anna, TX 75409
Anna, TX - I performed a single cooling maintenance on a 2014 heat pump system. I checked amps, capacitors, filters, electrical, cleanliness, drains, and safeties. During my thorough evaluation, I discovered a couple of issues. 
The low voltage wire is becoming exposed and will end up shorting out. 
The blower motor has enough build up to cause damage to the motor and needs to be cleaned.
The evaporator coil could use some cleaning. The system is not cooling as efficiently as it can due to oxidation. 
I presented options to address these concerns during the time of service.
Anna, TX - I performed a single cooling maintenance on a 2014 heat pump system. I checked amps, capacitors, filters, electrical, cleanliness, drains, and safeties. During my thorough evaluation, I discovered a couple of issues. 
The low voltage wire is becoming exposed and will end up shorting out. 
The blower motor has enough build up to cause damage to the motor and needs to be cleaned.
The evaporator coil could use some cleaning. The system is not cooling as efficiently as it can due to oxidation. 
I presented options to address these concerns during the time of service.
Clayton P.
Clayton P.
Upon arrival, I noticed that the thermostat was set to cool. But system was not running, I took door off of furnace and control board was showing a twinning fault. Turn power off to system, turn power back on and system is running properly at this time. This may be due to a control board issue because this system should not be set up for twinning. A control board could be starting to go out if it does this again we will need to replace control board. I could not get a system to replicate issue, so we will see if it doesn’t again.
Anna, TX 75409
Anna, TX - Upon arrival, I noticed that the thermostat was set to cool. But system was not running, I took door off of furnace and control board was showing a twinning fault. Turn power off to system, turn power back on and system is running properly at this time. 

This may be due to a control board issue because this system should not be set up for twinning. A control board could be starting to go out if it does this again we will need to replace control board.

I could not get a system to replicate issue, so we will see if it doesn’t again.
Anna, TX - Upon arrival, I noticed that the thermostat was set to cool. But system was not running, I took door off of furnace and control board was showing a twinning fault. Turn power off to system, turn power back on and system is running properly at this time. 

This may be due to a control board issue because this system should not be set up for twinning. A control board could be starting to go out if it does this again we will need to replace control board.

I could not get a system to replicate issue, so we will see if it doesn’t again.
Skylar M.
Skylar M.
Customer had concerns about front room getting hot.Thermostat was set for cool and dampers were opening correctly. Noticed that zone board was going into low temperature lockout and would shut the unit off after a few minutes of running. Sensor was located right off of coil at the front of the plenum. When thermostat is set to 68-70 the temperature was too cold coming off the coil. Moved sensor back to where it’s sensing more accurately. After adjustment, system stayed running like it should. All ductwork is connected and air is coming out of all vents. System is cooling at this time.
Anna, TX 75409
Anna, TX - Customer had concerns about front room getting hot.Thermostat was set for cool and dampers were opening correctly. Noticed that zone board was going into low temperature lockout and would shut the unit off after a few minutes of running. Sensor was located right off of coil at the front of the plenum. When thermostat is set to 68-70 the temperature was too cold coming off the coil. Moved sensor back to where it’s sensing more accurately. After adjustment, system stayed running like it should. All ductwork is connected and air is coming out of all vents. System is cooling at this time.
Anna, TX - Customer had concerns about front room getting hot.Thermostat was set for cool and dampers were opening correctly. Noticed that zone board was going into low temperature lockout and would shut the unit off after a few minutes of running. Sensor was located right off of coil at the front of the plenum. When thermostat is set to 68-70 the temperature was too cold coming off the coil. Moved sensor back to where it’s sensing more accurately. After adjustment, system stayed running like it should. All ductwork is connected and air is coming out of all vents. System is cooling at this time.
Skylar M.
Skylar M.
3 system AC maintenance. Customer is having issues with downstairs system. Checked refrigerant pressures and found system low. Checked indoor coil and it is frozen up. Need to come back at a later date when coil is thawed out, that way I can finish diagnosing problem. Performed maintenances on other two systems. Replaced filters provided by customer. Measure temperature drop across systems. Checked operation of drain lines, and treated them with drain solution. Systems have safety shut off switches. Measured amp draw on compressor’s and condenser fan motors. Checked capacitors and Contactors. 45/10 capacitor on Lennox system is very low, customer will replace it on his own. Refrigerant pressures on Lennox system are slightly low, when I come out to look at the other one I will add a pound or 2 to that system as well. Cleaned condenser coils using water. Systems are cooling at this time.
Anna, TX 75409
Anna, TX - 3 system AC maintenance. Customer is having issues with downstairs system. Checked refrigerant pressures and found system low. Checked indoor coil and it is frozen up. Need to come back at a later date when coil is thawed out, that way I can finish diagnosing problem. Performed maintenances on other two systems.  Replaced filters provided by customer. Measure temperature drop across systems. Checked operation of drain lines, and treated them with drain solution. Systems have safety shut off switches. Measured amp draw on compressor’s and condenser fan motors. Checked capacitors and Contactors. 45/10 capacitor on Lennox system is very low, customer will replace it on his own. Refrigerant pressures on Lennox system are slightly low, when I come out to look at the other one I will add a pound or 2 to that system as well. Cleaned condenser coils using water. Systems are cooling at this time.
Anna, TX - 3 system AC maintenance. Customer is having issues with downstairs system. Checked refrigerant pressures and found system low. Checked indoor coil and it is frozen up. Need to come back at a later date when coil is thawed out, that way I can finish diagnosing problem. Performed maintenances on other two systems.  Replaced filters provided by customer. Measure temperature drop across systems. Checked operation of drain lines, and treated them with drain solution. Systems have safety shut off switches. Measured amp draw on compressor’s and condenser fan motors. Checked capacitors and Contactors. 45/10 capacitor on Lennox system is very low, customer will replace it on his own. Refrigerant pressures on Lennox system are slightly low, when I come out to look at the other one I will add a pound or 2 to that system as well. Cleaned condenser coils using water. Systems are cooling at this time.
Skylar M.
Skylar M.
Dryer vent cleaning. Removed flex hose and cleaned it out. Ran cleaning brush all the way up to the roof vent and back down, very minimal lint came out. Got up on roof and found that screen for dryer vent was blocked by an inch of lint. Cleared that out and reinstalled the screen. Tested dryer after cleaning.
Anna, TX 75409
Anna, TX - Dryer vent cleaning. Removed flex hose and cleaned it out. Ran cleaning brush all the way up to the roof vent and back down, very minimal lint came out. Got up on roof and found that screen for dryer vent was blocked by an inch of lint. Cleared that out and reinstalled the screen. Tested dryer after cleaning.
Anna, TX - Dryer vent cleaning. Removed flex hose and cleaned it out. Ran cleaning brush all the way up to the roof vent and back down, very minimal lint came out. Got up on roof and found that screen for dryer vent was blocked by an inch of lint. Cleared that out and reinstalled the screen. Tested dryer after cleaning.
Jesse V.
Jesse V.
Here’s a polished, professional service summary that clearly documents your findings and the work performed. HVAC Service Summary Report Reason for Visit: Customer reported two concerns: 1. The outdoor condenser unit was making an unusual noise. 2. The system would occasionally perform a brief shutdown during the late evening hours before restarting. Thermostat Inspection & Programming Upon arrival, I began my evaluation at the thermostat. A complete review of the thermostat programming was performed, and the operating settings were verified. To improve overall system performance and reduce unnecessary wear on the equipment, the following adjustments were made: * Increased the equipment time-delay settings where appropriate. * Programmed the indoor blower to start before the outdoor compressor engages, allowing proper airflow before refrigeration begins. * Verified the blower off-delay is enabled so the indoor fan continues to operate briefly after the compressor satisfies the t
Anna, TX 75409
Anna, TX - Here’s a polished, professional service summary that clearly documents your findings and the work performed.

HVAC Service Summary Report

Reason for Visit:
Customer reported two concerns:

1. The outdoor condenser unit was making an unusual noise.
2. The system would occasionally perform a brief shutdown during the late evening hours before restarting.

Thermostat Inspection & Programming

Upon arrival, I began my evaluation at the thermostat.

A complete review of the thermostat programming was performed, and the operating settings were verified. To improve overall system performance and reduce unnecessary wear on the equipment, the following adjustments were made:

* Increased the equipment time-delay settings where appropriate.
* Programmed the indoor blower to start before the outdoor compressor engages, allowing proper airflow before refrigeration begins.
* Verified the blower off-delay is enabled so the indoor fan continues to operate briefly after the compressor satisfies the t
Anna, TX - Here’s a polished, professional service summary that clearly documents your findings and the work performed.

HVAC Service Summary Report

Reason for Visit:
Customer reported two concerns:

1. The outdoor condenser unit was making an unusual noise.
2. The system would occasionally perform a brief shutdown during the late evening hours before restarting.

Thermostat Inspection & Programming

Upon arrival, I began my evaluation at the thermostat.

A complete review of the thermostat programming was performed, and the operating settings were verified. To improve overall system performance and reduce unnecessary wear on the equipment, the following adjustments were made:

* Increased the equipment time-delay settings where appropriate.
* Programmed the indoor blower to start before the outdoor compressor engages, allowing proper airflow before refrigeration begins.
* Verified the blower off-delay is enabled so the indoor fan continues to operate briefly after the compressor satisfies the t
Jesse V.
Jesse V.
Done
Anna, TX 75409
Clayton P.
Clayton P.
Carrier Installed new blower wheel tested system. System is running properly at this time. Resealed evaporator coil with mastic and taped up arm reflex that had been ripped up due to ice when it froze.
Anna, TX 75409

Your High Efficiency

Experts