Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in August 2026.
The most recent job was on August 11, 2026.
Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
No cool on single system. Thermostat was set to cool and indoor blower was on. Went outside to condenser and only the fan was running. Checked the capacitor and it was dead. Replaced capacitor and tested system operation. Measured amp draw on compressor and fan motor. System is cooling at this time.
Performed one system maintenance. I found no issues on indoor unit and I found no issues on outdoor unit. Tested drain line with 1 gallon of water and drain line is clear. I did notice that the air filter needed to be replaced, homeowner does not have air filter at this time. I let him know that it needs to be replaced within 24 hours. I found no issues on outdoor unit, I checked start capacitor that was replaced in early July. It is still fully charged. Amp draws looked good on compressor. I lightly rinsed condenser with water hose to wash away any debris that may be on the outside. System is running properly at this time.
Tenant was hearing loud noise coming from outside unit. The noise started on Friday and has been doing it off and on since then. I was unable to recreate the noise while on site but customer shared a video of the noise. Checked amp draw on compressor and condenser fan motor. Fan motor is amping at the maximum allowed by manufacturer. Video also sounds like bearings from fan are grinding. Condenser fan motor needs to be replaced as well as contactor. Contactor is very pitted and has arc marks from repetitive use.
1 system AC maintenance. Replaced filter provided by customer. Checked operation of drain line and treated it with drain solution. Measured temperature drop across system, getting 21° difference. Checked amp draw on blower motor. Blower wheel, plenum and ductwork are getting pretty dirty. Recommend blower cleaning and duct cleaning. Next, went outside to condenser. Checked amp draw on compressor and fan motor. Checked capacitor and contactor. System is 4 years old and has original capacitor, recommend replacing it before it fails completely. Measured starting amp draw on compressor, it is under manufacturer limits. Cleaned condenser coil using water. System is cooling at this time.
Upon arrival I found that primary drain line was clogged and float. Switch had never been wired in. Cleared drain line and wired in float switch. Tested drain line. Drain line is clear. Tested system system is running properly at this time
A condensate deflectors that they sent us are not deflectors they are condensate channels I was on the phone with technical support trying to get a solution, I am waiting for technical support to give me a call back. Technical support is going to work on getting us the correct condensate deflectors in the meantime.
No cool on single system home. Indoor blower was running, condenser fan was running but compressor was not. Powered off system and checked capacitor. It was dead. Replaced capacitor and tested system after repair. Checked amp draw on compressor and condenser fan motor. System is cooling at this time. Contactor was making loud buzzing noise, recommend replacement but customer declined at this time.
2 system AC maintenance. Replaced 1 filter provided by customer, there was not enough for the other one. Measured amp draw on blower motors. Checked operation of drain lines and treated them with drain solution. Neither system has safety shut off switches installed, recommended them to prevent any possible ceiling damage from clogged drain lines. Measured temperature drop across systems. Checked amp draw on compressors and condenser fan motors. Starting amp draw on both systems was over manufacturer limits, recommend installing hard start kits that bring the starting amp draw down and prevent premature failure of compressors. Checked capacitors and Contactors. Capacitor for upstairs unit is out of range and needs to be replaced. Cleaned condenser coils using water. Systems are cooling at this time. On arrival, upstairs condenser was tripping the breaker after about 5 min of running. Checked wiring in unit as well as breaker panel. Found that lugs inside breaker panel were lose and ca
Perform two system maintenance. I noticed that neither systems had water protection installed. (Float switch) Both systems are running properly and drain lines are clear. Left estimate for two float switches with homeowner
Customer had seen water dripping from secondary drain line outside. Then they found water was in the drain pan and dripping from the bottom of the unit. I poured water down drain line before Ptrap and water did not drain through. Removed section of drain line including ptrap. Blew it out with water and nitrogen. Big chunks of buildup came out of drain line. Reinstalled drain and poured water down it to verify it was clear. Removed water out of drain pan. System is cooling at this time.

