Menu

Heating and Air Conditioning Services in Anna, TX

Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.

Schedule Service in AnnaCall (903) 482-4900

HVAC Services in Anna, TX

Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:

AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.

AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.

Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.

Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.

Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.

Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.

Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.

HVAC Services for Anna’s Growing Neighborhoods

Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.

For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.

Why Anna Homeowners Choose Adon Complete

Schedule Service in AnnaCall (903) 482-4900

Frequently Asked Questions

Here are some answers to common questions we get about our Anna HVAC services.

How much does AC repair cost in Anna, TX?

Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Anna?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.

What HVAC brands do you service in Anna?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.

Do you offer HVAC maintenance plans in Anna?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.

What areas near Anna do you serve?

We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.

Schedule HVAC Service in Anna Today

We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in AnnaCall (903) 482-4900

Recent Jobs and Reviews in Anna, TX

Rated 4.9 out of 5 stars based on 67 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Anna, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in July 2026.

The most recent job was on July 20, 2026.

Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.

Job Locations

Shelby S.
Shelby S.
Upon arrival, I found the drain clogged and the float switch had failed. I cleared the drain line and installed a capped vent before the ptrap to allow treatment to get inside of it. I replaced the float switch and verified that it would work properly. I treated the drain afterwards. It was stated this has been an issue for a few days during my visit today.
Anna, TX 75409
Anna, TX - Upon arrival, I found the drain clogged and the float switch had failed. I cleared the drain line and installed a capped vent before the ptrap to allow treatment to get inside of it. I replaced the float switch and verified that it would work properly. I treated the drain afterwards. It was stated this has been an issue for a few days during my visit today.
Anna, TX - Upon arrival, I found the drain clogged and the float switch had failed. I cleared the drain line and installed a capped vent before the ptrap to allow treatment to get inside of it. I replaced the float switch and verified that it would work properly. I treated the drain afterwards. It was stated this has been an issue for a few days during my visit today.
Shelby S.
Shelby S.
I performed a single cooling maintenance on a 2013 zoned straight cool system. Client mentioned 2 rooms being hot upstairs and that it over cools other portions. Someone previously zip tied the upstairs damper open. I removed it to allow it work normally. The reason it was zip tied is due to the duct design. The system needs a bypass duct added. The indoor unit is full of growth causing excessive stain. The blower motor is on its way out. I took a video for proof. The drains are not designed correctly causing the draining water to fight against pressure. The system is cooling upon departure.
Anna, TX 75409
Anna, TX - I performed a single cooling maintenance on a 2013 zoned straight cool system. Client mentioned 2 rooms being hot upstairs and that it over cools other portions. Someone previously zip tied the upstairs damper open. I removed it to allow it work normally. The reason it was zip tied is due to the duct design. The system needs a bypass duct added. The indoor unit is full of growth causing excessive stain. The blower motor is on its way out. I took a video for proof. The drains are not designed correctly causing the draining water to fight against pressure.  The system is cooling upon departure.
Anna, TX - I performed a single cooling maintenance on a 2013 zoned straight cool system. Client mentioned 2 rooms being hot upstairs and that it over cools other portions. Someone previously zip tied the upstairs damper open. I removed it to allow it work normally. The reason it was zip tied is due to the duct design. The system needs a bypass duct added. The indoor unit is full of growth causing excessive stain. The blower motor is on its way out. I took a video for proof. The drains are not designed correctly causing the draining water to fight against pressure.  The system is cooling upon departure.
Shelby S.
Shelby S.
Upon arrival, I found the fan set to on. This would cause the blower to run none stop. I proceeded into the attic and discovered that the system’s primary and secondary were severely clogged almost causing water damage to the home. With client approval, I was able to get both drains flowing again. I opened the indoor unit and was able to determine the reason for the clog. It appears the evaporator coil had build up matted to it. It fell off and washed towards the drain. The drain will likely clog again without cleaning the evaporator coil. I left pricing to replace the thermostat to one that is easier to operate and for cleaning the indoor unit to try and prevent clogging again. The system is drain and cooling upon departure.
Anna, TX 75409
Anna, TX - Upon arrival, I found the fan set to on. This would cause the blower to run none stop. I proceeded into the attic and discovered that the system’s primary and secondary were severely clogged almost causing water damage to the home. With client approval, I was able to get both drains flowing again. I opened the indoor unit and was able to determine the reason for the clog. It appears the evaporator coil had build up matted to it. It fell off and washed towards the drain. The drain will likely clog again without cleaning the evaporator coil. I left pricing to replace the thermostat to one that is easier to operate and for cleaning the indoor unit to try and prevent clogging again. The system is drain and cooling upon departure.
Anna, TX - Upon arrival, I found the fan set to on. This would cause the blower to run none stop. I proceeded into the attic and discovered that the system’s primary and secondary were severely clogged almost causing water damage to the home. With client approval, I was able to get both drains flowing again. I opened the indoor unit and was able to determine the reason for the clog. It appears the evaporator coil had build up matted to it. It fell off and washed towards the drain. The drain will likely clog again without cleaning the evaporator coil. I left pricing to replace the thermostat to one that is easier to operate and for cleaning the indoor unit to try and prevent clogging again. The system is drain and cooling upon departure.
Clayton P.
Clayton P.
Upon arrival I found that water was leaking from supply Plenum down onto the ceiling. I then noticed that the suction line is not cold on the system. Upon further investigation, I found that the evaporator coil was freezing up due to low refrigerant. Since the evaporator coil was freezing up, as it was thawing, it was producing more water, splashing water into the supply, Plenum and then leaking onto the ceiling. After performing an electronic leak search I discovered that there is a refrigerant leak inside the evaporator coil. Will need to replace evaporator coil under warranty. Evaporator coil will be under warranty. The homeowner will be responsible for labor cost, a new TXV, 8 pounds of refrigerant, and a filter dryer. The system holds 8 pounds of 410A refrigerant.
Anna, TX 75409
Anna, TX - Upon arrival I found that water was leaking from supply Plenum down onto the ceiling. I then noticed that the suction line is not cold on the system. Upon further investigation, I found that the evaporator coil was freezing up due to low refrigerant. Since the evaporator coil was freezing up, as it was thawing, it was producing more water, splashing water into the supply, Plenum and then leaking onto the ceiling. After performing an electronic leak search I discovered that there is a refrigerant leak inside the evaporator coil. Will need to replace evaporator coil under warranty. Evaporator coil will be under warranty. The homeowner will be responsible for labor cost, a new TXV, 8 pounds of refrigerant, and a filter dryer. The system holds 8 pounds of 410A refrigerant.
Anna, TX - Upon arrival I found that water was leaking from supply Plenum down onto the ceiling. I then noticed that the suction line is not cold on the system. Upon further investigation, I found that the evaporator coil was freezing up due to low refrigerant. Since the evaporator coil was freezing up, as it was thawing, it was producing more water, splashing water into the supply, Plenum and then leaking onto the ceiling. After performing an electronic leak search I discovered that there is a refrigerant leak inside the evaporator coil. Will need to replace evaporator coil under warranty. Evaporator coil will be under warranty. The homeowner will be responsible for labor cost, a new TXV, 8 pounds of refrigerant, and a filter dryer. The system holds 8 pounds of 410A refrigerant.
Skylar M.
Skylar M.
Downstairs- Tenant stated that it was taking a long time for system to cool down to the set point. Refrigerant pressures and sub cooling were very high, indicating that the system is overcharged. Recovered refrigerant and got subcooling and superheat within acceptable range. Temperature drop across system is 19°. Another issue is that the return for the downstairs system is upstairs. This doesn’t allow the hot air from downstairs to cycle through the system, and therefore cannot cool the space correctly. Drain pan for system is rusting out because primary drain line is not sloped properly. This is causing the condensation to drain into secondary pan. Sent estimate to replace drain pan and fix primary drain line so it drains properly. Upstairs- checked system refrigerant levels and they were low. Customer approved adding 2 lbs of refrigerant. Pressures and sub cooling are within acceptable range now. Checked temperature drop across system, getting 20° difference.
Anna, TX 75409
Anna, TX - Downstairs- Tenant stated that it was taking a long time for system to cool down to the set point. Refrigerant pressures and sub cooling were very high, indicating that the system is overcharged. Recovered refrigerant and got subcooling and superheat within acceptable range. Temperature drop across system is 19°. Another issue is that the return for the downstairs system is upstairs. This doesn’t allow the hot air from downstairs to cycle through the system, and therefore cannot cool the space correctly. Drain pan for system is rusting out because primary drain line is not sloped properly. This is causing the condensation to drain into secondary pan. Sent estimate to replace drain pan and fix primary drain line so it drains properly. 


Upstairs- checked system refrigerant levels and they were low. Customer approved adding 2 lbs of refrigerant. Pressures and sub cooling are within acceptable range now. Checked temperature drop across system, getting 20° difference.
Anna, TX - Downstairs- Tenant stated that it was taking a long time for system to cool down to the set point. Refrigerant pressures and sub cooling were very high, indicating that the system is overcharged. Recovered refrigerant and got subcooling and superheat within acceptable range. Temperature drop across system is 19°. Another issue is that the return for the downstairs system is upstairs. This doesn’t allow the hot air from downstairs to cycle through the system, and therefore cannot cool the space correctly. Drain pan for system is rusting out because primary drain line is not sloped properly. This is causing the condensation to drain into secondary pan. Sent estimate to replace drain pan and fix primary drain line so it drains properly. 


Upstairs- checked system refrigerant levels and they were low. Customer approved adding 2 lbs of refrigerant. Pressures and sub cooling are within acceptable range now. Checked temperature drop across system, getting 20° difference.
Shelby S.
Shelby S.
I performed a single cooling maintenance on a 2018 heat pump system. This unit services 2 floor without zoning. During my thorough evaluation, I noticed a couple deficiencies. The indoor unit needs cleaning. The unit is full of growth, and the blower wheel has enough build up to cause motor damage. The contactor has a huge burn spot on the bottom side. The compressor has 2 capacitors jumped together to get it to the correct rating. It is advised to replace this to minimize crowding in the cabinet. The system does not have a water safety switch to protect from water damage. The supply plenum is leaking air from a poor patch spot. Also, I provided an option to try and prevent the growth from coming back once it is cleaned.
Anna, TX 75409
Anna, TX - I performed a single cooling maintenance on a 2018 heat pump system. This unit services 2 floor without zoning. During my thorough evaluation, I noticed a couple deficiencies. The indoor unit needs cleaning. The unit is full of growth, and the blower wheel has enough build up to cause motor damage. The contactor has a huge burn spot on the bottom side. The compressor has 2 capacitors jumped together to get it to the correct rating. It is advised to replace this to minimize crowding in the cabinet. The system does not have a water safety switch to protect from water damage. The supply plenum is leaking air from a poor patch spot. Also, I provided an option to try and prevent the growth from coming back once it is cleaned.
Anna, TX - I performed a single cooling maintenance on a 2018 heat pump system. This unit services 2 floor without zoning. During my thorough evaluation, I noticed a couple deficiencies. The indoor unit needs cleaning. The unit is full of growth, and the blower wheel has enough build up to cause motor damage. The contactor has a huge burn spot on the bottom side. The compressor has 2 capacitors jumped together to get it to the correct rating. It is advised to replace this to minimize crowding in the cabinet. The system does not have a water safety switch to protect from water damage. The supply plenum is leaking air from a poor patch spot. Also, I provided an option to try and prevent the growth from coming back once it is cleaned.
Shelby S.
Shelby S.
I performed a single cooling maintenance on an under 1 year old R454B heat pump. I checked amps, capacitor, filter cleanliness, drains, electrical, and safeties. After speaking with Nick, I discovered that the system currently is not actively running. I found it set to heat 61 and I returned it to that when I was done. The system is fully functional and cooling well. After I checked the system, I rinsed the outdoor unit. The system was set back to not run upon departure.
Anna, TX 75409
Anna, TX - I performed a single cooling maintenance on an under 1 year old R454B heat pump. I checked amps, capacitor, filter cleanliness, drains, electrical, and safeties. After speaking with Nick, I discovered that the system currently is not actively running. I found it set to heat 61 and I returned it to that when I was done. The system is fully functional and cooling well. After I checked the system, I rinsed the outdoor unit. The system was set back to not run upon departure.
Anna, TX - I performed a single cooling maintenance on an under 1 year old R454B heat pump. I checked amps, capacitor, filter cleanliness, drains, electrical, and safeties. After speaking with Nick, I discovered that the system currently is not actively running. I found it set to heat 61 and I returned it to that when I was done. The system is fully functional and cooling well. After I checked the system, I rinsed the outdoor unit. The system was set back to not run upon departure.
Skylar M.
Skylar M.
1 system AC maintenance. Replaced filter provided by customer. Checked amp draw on blower motor. Measured temperature drop across system, getting 19° difference. Checked operation of drain line and safety switch. Treated it with drain solution. Checked amp draw on compressor and condenser fan motor. Checked capacitor and contactor, they are both within acceptable tolerance. Cleaned condenser coil using water. System is cooling at this time. Performed blower wheel cleaning, evaporator coil cleaning, and installed hard start kit for compressor.
Anna, TX 75409
Anna, TX - 1 system AC maintenance. Replaced filter provided by customer. Checked amp draw on blower motor. Measured temperature drop across system, getting 19° difference. Checked operation of drain line and safety switch. Treated it with drain solution. Checked amp draw on compressor and condenser fan motor. Checked capacitor and contactor, they are both within acceptable tolerance. Cleaned condenser coil using water. System is cooling at this time. 

Performed blower wheel cleaning, evaporator coil cleaning, and installed hard start kit for compressor.
Anna, TX - 1 system AC maintenance. Replaced filter provided by customer. Checked amp draw on blower motor. Measured temperature drop across system, getting 19° difference. Checked operation of drain line and safety switch. Treated it with drain solution. Checked amp draw on compressor and condenser fan motor. Checked capacitor and contactor, they are both within acceptable tolerance. Cleaned condenser coil using water. System is cooling at this time. 

Performed blower wheel cleaning, evaporator coil cleaning, and installed hard start kit for compressor.
Shelby S.
Shelby S.
7/15/2026 I returned to install the new control board. I tested and cycled the system a couple times to verify it was going to perform correctly. I did not observe any arcing on the new control board. The old control board arced when inserting the 3 amp fuse. I could not replicate after the first occurrence. Also, I showed the client how to operate her new thermostat. Cause for replacement: intermittent failure causing the system to lose 24v Scope of work 1. Access the inside of the furnace 2. Remove all wiring from the control board 3. Remove the control board 4. Mount new control board 5. Rewire the control board back into the system 6. Test the system to ensure proper operation
Anna, TX 75409
Anna, TX - 7/15/2026
I returned to install the new control board. I tested and cycled the system a couple times to verify it was going to perform correctly. I did not observe any arcing on the new control board. The old control board arced when inserting the 3 amp fuse. I could not replicate after the first occurrence. Also, I showed the client how to operate her new thermostat. 

Cause for replacement: intermittent failure causing the system to lose 24v 

Scope of work
1. Access the inside of the furnace 
2. Remove all wiring from the control board 
3. Remove the control board 
4. Mount new control board 
5. Rewire the control board back into the system
6. Test the system to ensure proper operation
Anna, TX - 7/15/2026
I returned to install the new control board. I tested and cycled the system a couple times to verify it was going to perform correctly. I did not observe any arcing on the new control board. The old control board arced when inserting the 3 amp fuse. I could not replicate after the first occurrence. Also, I showed the client how to operate her new thermostat. 

Cause for replacement: intermittent failure causing the system to lose 24v 

Scope of work
1. Access the inside of the furnace 
2. Remove all wiring from the control board 
3. Remove the control board 
4. Mount new control board 
5. Rewire the control board back into the system
6. Test the system to ensure proper operation
Shelby S.
Shelby S.
Upon arrival, I invested the cleanliness of the indoor and outdoor systems. The high pitch noise is from the ECM module on the outdoor fan motor. This noise is from the hertz of the module. This noise can become louder the more strain on the motor. The ducts have a reasonable amount of sheet rock duct present. I investigated the drain to look for signs of sheet rock dust coming out. The drain had a sheet rock slurry in the ptrap. The drain will end up clogging and is more susceptible during the heating season. The sheet rock in the drain tells me that the evaporator coil has it in it. This leaves the system at risk of freezing up and causing potential water damage. I presented pricing for minimal advised repairs, all levels of duct cleaning, and maintenance membership.
Anna, TX 75409
Anna, TX - Upon arrival, I invested the cleanliness of the indoor and outdoor systems. The high pitch noise is from the ECM module on the outdoor fan motor. This noise is from the hertz of the module. This noise can become louder the more strain on the motor. The ducts have a reasonable amount of sheet rock duct present. I investigated the drain to look for signs of sheet rock dust coming out. The drain had a sheet rock slurry in the ptrap. The drain will end up clogging and is more susceptible during the heating season. The sheet rock in the drain tells me that the evaporator coil has it in it. This leaves the system at risk of freezing up and causing potential water damage. I presented pricing for minimal advised repairs, all levels of duct cleaning, and maintenance membership.
Anna, TX - Upon arrival, I invested the cleanliness of the indoor and outdoor systems. The high pitch noise is from the ECM module on the outdoor fan motor. This noise is from the hertz of the module. This noise can become louder the more strain on the motor. The ducts have a reasonable amount of sheet rock duct present. I investigated the drain to look for signs of sheet rock dust coming out. The drain had a sheet rock slurry in the ptrap. The drain will end up clogging and is more susceptible during the heating season. The sheet rock in the drain tells me that the evaporator coil has it in it. This leaves the system at risk of freezing up and causing potential water damage. I presented pricing for minimal advised repairs, all levels of duct cleaning, and maintenance membership.

Your High Efficiency

Experts