Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in July 2026.
The most recent job was on July 10, 2026.
Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Upon arrival I found that indoor blower motor was running and outdoor condenser was getting 24 V at the contactor. Contactor was pushed in, but outdoor unit was not running. Found that start capacitor was bad. System is under warranty. Replaced 45/5 stock cap capacitor. I advised landlord to have the outdoor unit properly cleaned and highly recommend recommended our maintenance service agreement landlord opted to replace capacitor have outdoor unit clean and sign up for service agreement. I tested system. System is running properly.
Performed cooling maintenance. Found that contactor in outdoor unit was weak. Recommended to homeowner changing the contactor and offered a light cleaning inside the air handler to clean out all of the gunk replaced contactor and quite quick wipe down inside air handler. Then when I want to test system blower would not come back on. Replaced blower motor.
REMOVE AND CLEAN BLOWER ASSEMBLY LEVEL 1 Hard Start Kit install
Wiring harness replacement due to out of range ohm readings only on the wiring harness itself. 7/8/2026 Returned to install the wiring harness. The compressor still did not want to start. I installed a hard start kit to see if I could get it to kick it on. It did turn on but sounds absolutely awful. We will need to build a price for a compressor replacement tomorrow when the supply house is open again. Client wanted to schedule for Jesse to come out to go over replacement options as well. I removed the part per the request of the client.
I just treated drain lines until we can reschedule maintenance. I found that primary drain line was clogged up on master bedroom system, but they are still cooling. Left estimate to clear drain line, homeowner says they will reschedule.
Upon arrival, I found the condenser fan motor spinning, but the compressor was not operating due to overheating. I cooled the compressor down and began testing. It appears an electrical surge has damaged the Run winding of the compressor. The compressor starts up fine, but it is followed by obnoxious noises and rapidly fluctuating amps until it overheats. I tested the capacitor and found it to be good. Power supply is not the issue because the fan motor is operating normally. Client approved the warranty replacement and is aware of the refrigerant adjustments during the repair. We will reach out once we know more about availability and scheduling.
Upon arrival, client stated the compressor would pull high amps causing the breaker to trip. I tested the ohms of the compressor at the spade connectors and had reading indicating that the compressor windings are bad. I pulled the top off and tested directly at the compressor terminals. This test showed normal ohms for the windings. It appears our issue is the compressor wiring harness itself. Client had to leave to get back to work. I sent over the price for an out of warranty wiring harness.
I returned to install the blower motor and evaluate the system. After installing the blower motor, I checked the drain line to ensure they were draining before leaving, I took a temperature split to ensure the system is cooling properly, and the cleanliness of the system. The indoor system is full of growth, the tenets don’t change the filter frequently enough (every 2 weeks due to 1” filter and dog hair), and the outdoor unit has build up due to lack of maintenance. The system is cooling upon departure, and I sent pricing to address the other noticed issues.
Upon arrival, I determined that cleaning the evaporator coil did not fix the issue. I investigated to ensure the primary pan was not cracked. It is a metal pan that is insulated at the bottom. I noticed that the blower was set to 5 on cooling and 4 on heating. It appears the blower is pulling water off of the evaporator coil causing the insulation to get wet. This cools the cabinet making condensation on the exterior of the system. I changed the blower speed to 4 on cooling and 3 on heating. I asked the client to keep an eye on it to see how it responds.
Upon arrival, I found the system low on R410a. The target subcooling is 10 degrees, and I only had 3 degrees. I received customer approval to add refrigerant. The system took 3 pounds to reach the target subcooling. The house dropped 1 degree before leaving with the supply temp being 56 on some register and 52 on others. The system will need time to get back to comfortable. The system is cooling upon departure.

