Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX between June 2026 and July 2026.
The most recent job was on July 6, 2026.
Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Upon arrival, I found that the blower motor was not operating. I proceeded to the attic to find that the motor is attempting to spin but failing to do so. I verified that the warranty is expired. I reached out to the office for assistance in locating and pricing the replacement motor. The client approved the replacement, and the office will be in contact for scheduling.
The most wear and tear occurs when the unit starts up from a standstill. High start amps indicates that the unit is struggling to start and drawing excessive power. Hard start kit helps by reducing start amps thereby prolong lifespan of compressor and outdoor electrical components. I installed hard start kit and surge protector on outdoor unit and surge protector on indoor unit. Tested system, system is running properly at this time. I also tested primary drain line while I was here. Drain line is draining properly.
I performed a 2 system cooling maintenance on 2023 gas systems. I checked amps, capacitor, filters, electrical, drains, cleanliness, and safeties. The systems are cooling well with minimal issues. The primary drain line is clogged on the downstairs system, and I observed that the upstairs system does not have a surge protector. The customer approved the drain clearing and was not interested in the surge protector. Systems are cooling upon departure. Downstairs drain is clogged
Upon arrival, I discovered the system to be frozen. I observed ice on the compressor body. The client stated the system has only been off for 10 minutes before arriving. The client stated they pulled the filter today due to them being filthy. Due to the manner of the freezing, I am lead to believe it is due to the dirty filters. I advised leaving the system off for 2 to 3 hours to allow thawing. I left the blower on to assist in thawing the evaporator coil. I informed the client of the 30 day recall time frame.
I performed a single cooling maintenance on a 2021 zoned heat pump system. I checked amps, capacitor, filter, electrical, drains, and cleanliness. I found the system is cooling well with minimal issues. I advised adding an algae stick to the drain due to the drain appearing to be slow and a deep chemical cleaning for the outdoor unit because of dog hair being stuck in it. The client declined the options at the time of service.
1. Visually inspected condenser coil for leaks and abnormalities. 2. Inspected condenser fan motor, blades and bearings. 3. Inspected, cleaned, and, tightened wiring connections. 4. Measured capacitance of compressor/fan motor capacitor. 5. Inspected and measured resistance of contactor 6. Measured compressor current draw. 7. Measured condenser fan motor amp draw. 8. Inspected and replaced return filter. 9. Inspected return plenum for dust or debris. 10. Inspected evaporator coil for cleanliness and oxidation. 11. Inspected blower motor/ blower wheel for dust and debris 12. Measured blower motor current draw. 13. Measured temperature differential from supply to return. 14. Tested drain lines for proper drainage and treated to prevent blockages. 15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. Home is only cooling to 75 degrees. Found fresh air to return without a damper or controller to shut it down when it’s hot outsid
I performed a single cooling maintenance on a 2022 heat pump system. I checked amps, capacitors, filter, electrical, drains, cleanliness, and safeties. The system is overall performing well. I did notice that system has minimal safeties. I gave an option to install a surge protector on the outdoor unit to protect the compressor/fan motor/defrost board to the best of our ability. Client approved the installation of a surge protector to the outdoor unit. After I installed the surge protector, I ensured it was operational and the system is cooling.
Arrived on site, found water dripping from secondary drain line. Also observed upstairs overcooling set to 73 reading 66. Tested drain line and found it to be clogged. Found upstairs damper not closing when upstairs thermostat was shut off. Attempted several times to open and close the damper and received no response while damper was receiving signal. Advised drain line unclogging and damper actuator replacement. Homeowner elected to go forward with both. Blew out drain line with nitrogen and disassembled sink p trap to remove blockages. Tested ac drain line with water and found it to be draining well. Tested sink drainage and found it to not be draining. Advised homeowner that they would need to call a plumber to address this as the issue is within the wall where the sink drains out. Replaced damper actuator and tested. Damper was now opening and closing when called for. System in good working order upon departure.
Arrived on site, found water in emergency drain pan. Tested primary drain line and found it to be draining at this time. Homeowner did say he tried to clear the line before I arrived. Tested primary drain pan and found it to be draining as well. Advised homeowner I was unsure if drain line became clear when he tried to clear it or when I poured water into the primary pan. I did notice evidence of water being pulled off of the evaporator and that the evaporator was dirty with signs of oxidation. This can restrict airflow and cause condensation to be pulled off the evaporator and lower system efficiency. Homeowner approved evap coil cleaning. Performed chemical cleaning and showed pictures to the homeowner and double checked drain line and found all to be well. System cooling on departure.
Arrived on site, customer installed thermostat was not cooling. Found an unfamiliar thermostat. Called for cooling and upon checking the outdoor unit it was found the unit was running in heating. Discussed with customer and he adjusted the reversing valve setting himself. Performed check over system and both zones were cooling in cool and heating in heat. Checked aux heat and found it was coming on when it was called for. Advised homeowner it would take several hours for the thermostats to reach set point. System running well upon departure 20 degrees measured across coil.

