Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in June 2026.
The most recent job was on June 12, 2026.
Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Customer is having plumbing issues in the master bathroom. This is where the system that is backing up is draining. Customer wants to contact a plumber first before proceeding with cleaning. The customer is interested in the level 2. We will follow up on Monday.
Arrived on site, observed water coming out of both secondary drain line. Tested primary drain lines and found them to not be draining sufficiently. This would cause water to flow out of secondary drain lines to prevent water from coming through ceiling. Provided estimate for drain line clearing with and without maintenance. Homeowner did not like the price and texted his neighbor to see what he paid for drain line clearing earlier in the week and was told they cleared it for free with 129 maintenance. Offered $25 discount with manager approval. Homeowner elected just pay for the dispatch and go with the other company. Systems running on departure.
Upon arrival I found unit not cooling. At condenser I found a bad dual capacitor. Offered customer both OEM and turbo option. Customer chose turbo and declined membership offer. Replaced capacitor and restored unit. It is now cooling and operating normally. As I courtesy I washed off condenser coils with water. Turbo comes with a 5 year warranty.
Found jones valve shut off and unit draining through secondary. Pan full of water and primary drainline draining properly after Jones valve opened. Explained proper position of valve cut off and treated drainline with total C as a courtesy. Unit always running, never was down. Customer concerned over water in the pan.
Replaced a2l sensor. Turned unit back on and everything came on as intended. Measured 20 degree split from supply to return. Allowed unit to run for 20 minutes to ensure everything is working properly. System cooling on departure.
Customer Concern: Customer called today reporting that a bird had flown into the outdoor condenser unit. Customer was concerned about potential damage to the equipment. Findings Upon Arrival: Upon arrival, I verified that the customer had turned the HVAC system off both at the thermostat and at the outdoor disconnect. This was the correct action and helped prevent any potential damage to the equipment. Performed a visual inspection of the outdoor condenser unit. Found that the bird had come into contact with the condenser fan assembly and had been chopped into several pieces. Bird remains, feathers, blood, and the bird’s head were found inside the bottom section of the condenser cabinet. Work Performed: * Removed the access panel located on the rear side of the Lennox condenser unit. * Carefully removed all visible bird remains, feathers, and debris from inside the unit. * Removed the bird’s head and additional debris from the bottom of the condenser cabinet. * Thoroughly rinsed
Completed 1 system cooling tune up. Checked all critical components. Tested motor amp draw, capacitor, contactor, replaced filter and washed outside coils. Discussed and reviewed air flow into M/B. Current duct work set up/ being zoned and having dumps feed areas contribute to lower than optimal comfort in M/B. Provided some suggestions to help increase air flow into room and increase comfort. System in need of surge protection. Unit operating normally at this time. Estimate for surge protection emailed.
I performed a single cooling maintenance on a 2018 zoned gas system. I checked amps, capacitors, drains, electrical, cleanliness, and safeties. I discovered the primary drain is clogged, the capacitor is reading 42/45, and the contactor is heavily burnt and pitted. I provided options to address these issues during the time of service. 5 year warranty
Upon arrival, i found mini split low on R410a due to a schrader leak. I was quickly able to tighten it and check with soap bubbles. I charge the system with 1 pound if R410a. The supply temp went from 59 to 46 and is cooling properly. The unit is from 2022.
On this visit I was directed to U/S unit that wasn’t cooling. At AirHandler handler I noticed mitigation control board LED flashing an error. Per manual and tech support, sensor failing to communicate amd reading false leak. Sensor will need to be replaced. Unit install April 26’.

