Menu

Heating and Air Conditioning Services in Anna, TX

Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.

Schedule Service in AnnaCall (903) 482-4900

HVAC Services in Anna, TX

Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:

AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.

AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.

Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.

Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.

Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.

Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.

Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.

HVAC Services for Anna’s Growing Neighborhoods

Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.

For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.

Why Anna Homeowners Choose Adon Complete

Schedule Service in AnnaCall (903) 482-4900

Frequently Asked Questions

Here are some answers to common questions we get about our Anna HVAC services.

How much does AC repair cost in Anna, TX?

Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Anna?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.

What HVAC brands do you service in Anna?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.

Do you offer HVAC maintenance plans in Anna?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.

What areas near Anna do you serve?

We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.

Schedule HVAC Service in Anna Today

We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in AnnaCall (903) 482-4900

Recent Jobs and Reviews in Anna, TX

Rated 4.9 out of 5 stars based on 67 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Anna, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in June 2026.

The most recent job was on June 8, 2026.

Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.

Job Locations

Clever M.
Clever M.
Completed 1 system cooling maintenance. Checked all critical components. Tested motor amp draw, capacitors, contactors, replaced filter and washed outside coils. Found bio growth in coil cabinet, highly recommend air scrubber and cleaning. Recommended customer upgrade to 4” version of filter for better media. Discussed UVC germicidal light/cleaning and surge protection. Emailed estimates for review. Left card for review.
Anna, TX 75409
Anna, TX - Completed 1 system cooling maintenance. Checked all critical components. Tested motor amp draw, capacitors, contactors, replaced filter and washed outside coils. Found bio growth in coil cabinet, highly recommend air scrubber and cleaning. Recommended customer upgrade to 4” version of filter for better media. Discussed UVC germicidal light/cleaning and surge protection. Emailed estimates for review. Left card for review.
Anna, TX - Completed 1 system cooling maintenance. Checked all critical components. Tested motor amp draw, capacitors, contactors, replaced filter and washed outside coils. Found bio growth in coil cabinet, highly recommend air scrubber and cleaning. Recommended customer upgrade to 4” version of filter for better media. Discussed UVC germicidal light/cleaning and surge protection. Emailed estimates for review. Left card for review.
Shelby S.
Shelby S.
Upon arrival, I discovered that the system in question was working fine. After further observation, I discovered that the thermostat is a mercury bulb with no time delay. If the system was to go off and right back, it would make an awful noise and likely go out due to start amps or thermal overload. I offered to replace the thermostat and the customer declined. Customer wanted me to clean the evaporator coils. With the design of these indoor systems, it is difficult to thoroughly clean it because of risk of flooding the floor and getting electrical wet. These evaporator coils are 20 times cleaner than they were and cooling fine.
Anna, TX 75409
Anna, TX - Upon arrival, I discovered that the system in question was working fine. After further observation, I discovered that the thermostat is a mercury bulb with no time delay. If the system was to go off and right back, it would make an awful noise and likely go out due to start amps or thermal overload. I offered to replace the thermostat and the customer declined. Customer wanted me to clean the evaporator coils. With the design of these indoor systems, it is difficult to thoroughly clean it because of risk of flooding the floor and getting electrical wet. These evaporator coils are 20 times cleaner than they were and cooling fine.
Anna, TX - Upon arrival, I discovered that the system in question was working fine. After further observation, I discovered that the thermostat is a mercury bulb with no time delay. If the system was to go off and right back, it would make an awful noise and likely go out due to start amps or thermal overload. I offered to replace the thermostat and the customer declined. Customer wanted me to clean the evaporator coils. With the design of these indoor systems, it is difficult to thoroughly clean it because of risk of flooding the floor and getting electrical wet. These evaporator coils are 20 times cleaner than they were and cooling fine.
Clever M.
Clever M.
Quote Summary - Evaporator Coil Replacement Scope of Work • Recover refrigerant from existing system • Remove failed evaporator coil from Goodman air handler/furnace • Install new Goodman evaporator coil • Replace refrigerant filter drier to protect system from contaminants and moisture • Pressure test system to verify no leaks are present • Evacuate system to manufacturer specifications • Recharge system and verify proper refrigerant levels • Start and test system to confirm proper cooling operation for master bedroom system Materials & Equipment • evaporator coil • Replacement filter drier • Refrigerant as required • Brazing materials, nitrogen, and vacuum equipment Special Notes • Estimate is for the HVAC system servicing the master bedroom only • System will be fully tested after installation to verify proper performance and airflow • Additional refrigerant may be required depending on system condition and line length
Anna, TX 75409
Shelby S.
Shelby S.
I performed a single cooling maintenance on a 2022 heat pump system. I checked amps, capacitor, filter, electrical, drains, cleanliness, and safeties. Customer mentioned that their room is extremely cold and the living room is warm. I investigated the duct work and found that the 2 areas are on the end of the plenum. I toned back the bedroom by 25% to allow a little more air to the living room. During my thorough evaluation, I discovered growth formations in the indoor unit, the capacitor in the out unit failed testing and needs replacement, and the outdoor unit does not have surge protection. Also, I am offering an algae stick to continuously treat the drain to keep the drain clear and free flowing. I present options for these areas of concerns at the time of service.
Anna, TX 75409
Anna, TX - I performed a single cooling maintenance on a 2022 heat pump system. I checked amps, capacitor, filter, electrical, drains, cleanliness, and safeties. Customer mentioned that their room is extremely cold and the living room is warm. I investigated the duct work and found that the 2 areas are on the end of the plenum. I toned back the bedroom by 25% to allow a little more air to the living room. During my thorough evaluation, I discovered growth formations in the indoor unit, the capacitor in the out unit failed testing and needs replacement, and the outdoor unit does not have surge protection. Also, I am offering an algae stick to continuously treat the drain to keep the drain clear and free flowing. I present options for these areas of concerns at the time of service.
Anna, TX - I performed a single cooling maintenance on a 2022 heat pump system. I checked amps, capacitor, filter, electrical, drains, cleanliness, and safeties. Customer mentioned that their room is extremely cold and the living room is warm. I investigated the duct work and found that the 2 areas are on the end of the plenum. I toned back the bedroom by 25% to allow a little more air to the living room. During my thorough evaluation, I discovered growth formations in the indoor unit, the capacitor in the out unit failed testing and needs replacement, and the outdoor unit does not have surge protection. Also, I am offering an algae stick to continuously treat the drain to keep the drain clear and free flowing. I present options for these areas of concerns at the time of service.
Matthew C.
Matthew C.
Completed single system maintenance on a 2022 trane heat pump. I tested all electrical components on the inside unit all tested within manufacturer specifications. I did not change the filter at today's visit client did not have one. 20x25x4. I treated and flushed the drain line with total c and water. I did notice the duct work for the unit could use a good cleaning. I tested all the electrical components on the outside unit. All tested within manufacturer specifications except for the 70/7.5 capacitor. It is testing at 64/70. I rinsed the outdoor unit with water at today's visit. Unit was cooling upon departure. Capacitor failed at 64/70
Anna, TX 75409
Anna, TX - Completed single system maintenance on a 2022 trane heat pump. I tested all electrical components on the inside unit all tested within manufacturer specifications. I did not change the filter at today's visit client did not have one. 20x25x4. I treated and flushed the drain line with total c and water. I did notice the duct work for the unit could use a good cleaning. I tested all the electrical components on the outside unit. All tested within manufacturer specifications except for the 70/7.5 capacitor. It is testing at 64/70. I rinsed the outdoor unit with water at today's visit. Unit was cooling upon departure. 
Capacitor failed at 64/70
Anna, TX - Completed single system maintenance on a 2022 trane heat pump. I tested all electrical components on the inside unit all tested within manufacturer specifications. I did not change the filter at today's visit client did not have one. 20x25x4. I treated and flushed the drain line with total c and water. I did notice the duct work for the unit could use a good cleaning. I tested all the electrical components on the outside unit. All tested within manufacturer specifications except for the 70/7.5 capacitor. It is testing at 64/70. I rinsed the outdoor unit with water at today's visit. Unit was cooling upon departure. 
Capacitor failed at 64/70
Shelby S.
Shelby S.
Upon arrival, I discovered that the system was low on R410a. I located the leak in the evaporator coil. Customer elected to fill the system up with R410a and added leak seal. System is cooling properly upon leaving. The system is approximately 7 pounds low on R410a We will inject a leak sealant, as well as Disclaimer*** No warranty / no guarantee Leak sealant may cause further issues by plugging up portions of the refrigerant cycle.
Anna, TX 75409
Anna, TX - Upon arrival, I discovered that the system was low on R410a. I located the leak in the evaporator coil. Customer elected to fill the system up with R410a and added leak seal. System is cooling properly upon leaving. 

The system is approximately 7 pounds low on R410a
We will inject a leak sealant, as well as
Disclaimer***
No warranty / no guarantee 
Leak sealant may cause further issues by plugging up portions of the refrigerant cycle.
Anna, TX - Upon arrival, I discovered that the system was low on R410a. I located the leak in the evaporator coil. Customer elected to fill the system up with R410a and added leak seal. System is cooling properly upon leaving. 

The system is approximately 7 pounds low on R410a
We will inject a leak sealant, as well as
Disclaimer***
No warranty / no guarantee 
Leak sealant may cause further issues by plugging up portions of the refrigerant cycle.
Matthew C.
Matthew C.
Preformed single system maintenance on a 2023 trane heat pump. Tested all electrical components on the inside unit. All tested within manufacturer specifications. I tested the drain line with total c and water. I changed the filter for the client aprilaire 210 20x25x4. I tested all electrical components on the outside unit. All tested within manufacturer specifications. I rinsed the outdoor unit with water at today's visit. The only thing that I noticed is the unit doesn't have surge protectors on the unit inside or outside. By adding full system surge protectors you can help prevent any potential damage fcaused by lightning strikes or other surges in power. The surge protectors come with a $10,000 insurance repair policy from the manufacturer. If they fail to protect the unit they are connected to.
Anna, TX 75409
Anna, TX - Preformed single system maintenance on a 2023 trane heat pump. Tested all electrical components on the inside unit. All tested within manufacturer specifications. I tested the drain line with total c and water. I changed the filter for the client aprilaire 210 20x25x4. I tested all electrical components on the outside unit. All tested within manufacturer specifications. I rinsed the outdoor unit with water at today's visit. The only thing that I noticed is the unit doesn't have surge protectors on the unit inside or outside. By adding full system surge protectors you can help prevent any potential damage fcaused by lightning strikes or other surges in power. The surge protectors come with a $10,000 insurance repair policy from the manufacturer. If they fail to protect the unit they are connected to.
Anna, TX - Preformed single system maintenance on a 2023 trane heat pump. Tested all electrical components on the inside unit. All tested within manufacturer specifications. I tested the drain line with total c and water. I changed the filter for the client aprilaire 210 20x25x4. I tested all electrical components on the outside unit. All tested within manufacturer specifications. I rinsed the outdoor unit with water at today's visit. The only thing that I noticed is the unit doesn't have surge protectors on the unit inside or outside. By adding full system surge protectors you can help prevent any potential damage fcaused by lightning strikes or other surges in power. The surge protectors come with a $10,000 insurance repair policy from the manufacturer. If they fail to protect the unit they are connected to.
Shelby S.
Shelby S.
I performed a single cooling maintenance on a 2017 gas system. I checked amps, capacitor, filter, electrical, drains, and cleanliness. Customer stated the front bedroom is warmer than the rest of the house and that the system seems to be taking longer to cool after cleaning in January. I investigated both issues. To address the warm room, the ductwork will have to be reworked. The system is not blowing as cold due to the increased airflow. Customer approved adding 1 pound of 410a. This gave me a 53 supply temperature. The supply was originally 55. I observed that the system does not have any safeties. I offered to install a surge protector and float switch at the time of service. System appears to be 1 pound low on refrigerant. This is causing it to take a bit longer to cool the house.
Anna, TX 75409
Anna, TX - I performed a single cooling maintenance on a 2017 gas system. I checked amps, capacitor, filter, electrical, drains, and cleanliness. Customer stated the front bedroom is warmer than the rest of the house and that the system seems to be taking longer to cool after cleaning in January. I investigated both issues. To address the warm room, the ductwork will have to be reworked. The system is not blowing as cold due to the increased airflow. Customer approved adding 1 pound of 410a. This gave me a 53 supply temperature. The supply was originally 55. I observed that the system does not have any safeties. I offered to install a surge protector and float switch at the time of service. 
System appears to be 1 pound low on refrigerant. This is causing it to take a bit longer to cool the house.
Anna, TX - I performed a single cooling maintenance on a 2017 gas system. I checked amps, capacitor, filter, electrical, drains, and cleanliness. Customer stated the front bedroom is warmer than the rest of the house and that the system seems to be taking longer to cool after cleaning in January. I investigated both issues. To address the warm room, the ductwork will have to be reworked. The system is not blowing as cold due to the increased airflow. Customer approved adding 1 pound of 410a. This gave me a 53 supply temperature. The supply was originally 55. I observed that the system does not have any safeties. I offered to install a surge protector and float switch at the time of service. 
System appears to be 1 pound low on refrigerant. This is causing it to take a bit longer to cool the house.
Brayden W.
Brayden W.
Armstrong air 2017 furnace. Homeowner stated unit was not keeping up upstairs. Supply temperature measured at 65. Measured refrigerant pressures and found them to be low. This confirms system has a refrigerant leak. Leak is more than likely at evaporator coil as I cannot see any leaks outside. Found water draining out of secondary drain line outside. Advised homeowner should any blockage happen to the secondary line it will cause water to come through the ceiling. Outdoor electrical including contactor and capacitor were testing on the edge of manufacturer specifications and will likely need to be replaced soon. Provided options for coil replacement not under warranty, drain line clearing, and for the maintenance program. Homeowner elected to go forward with all three. Advised homeowner we have coil ordered and will likely be ready Friday or Monday. Added 3.5 lbs of 410a to allow system to cool in the mean time. Also cleared drain line and tested to verify all bloackages have been remo
Anna, TX 75409
Anna, TX - Armstrong air 2017 furnace. Homeowner stated unit was not keeping up upstairs. Supply temperature measured at 65. Measured refrigerant pressures and found them to be low. This confirms system has a refrigerant leak. Leak is more than likely at evaporator coil as I cannot see any leaks outside. Found water draining out of secondary drain line outside. Advised homeowner should any blockage happen to the secondary line it will cause water to come through the ceiling. Outdoor electrical including contactor and capacitor were testing on the edge of manufacturer specifications and will likely need to be replaced soon. Provided options for coil replacement not under warranty, drain line clearing, and for the maintenance program. Homeowner elected to go forward with all three. Advised homeowner we have coil ordered and will likely be ready Friday or Monday. Added 3.5 lbs of 410a to allow system to cool in the mean time. Also cleared drain line and tested to verify all bloackages have been remo
Anna, TX - Armstrong air 2017 furnace. Homeowner stated unit was not keeping up upstairs. Supply temperature measured at 65. Measured refrigerant pressures and found them to be low. This confirms system has a refrigerant leak. Leak is more than likely at evaporator coil as I cannot see any leaks outside. Found water draining out of secondary drain line outside. Advised homeowner should any blockage happen to the secondary line it will cause water to come through the ceiling. Outdoor electrical including contactor and capacitor were testing on the edge of manufacturer specifications and will likely need to be replaced soon. Provided options for coil replacement not under warranty, drain line clearing, and for the maintenance program. Homeowner elected to go forward with all three. Advised homeowner we have coil ordered and will likely be ready Friday or Monday. Added 3.5 lbs of 410a to allow system to cool in the mean time. Also cleared drain line and tested to verify all bloackages have been remo
Shelby S.
Shelby S.
Upon arrival, I observed that the outdoor suction line was not sweating at all. I proceeded to hook my gauges to the system and found the system to be low on R410a. After speaking with the customer, it was decided to get the system out of freezing but not fill it up. I got the temperature split to 15 degrees with 4 pounds of refrigerant per the customer’s request. System is somewhat cooling upon departure.
Anna, TX 75409
Anna, TX - Upon arrival, I observed that the outdoor suction line was not sweating at all. I proceeded to hook my gauges to the system and found the system to be low on R410a. After speaking with the customer, it was decided to get the system out of freezing but not fill it up. I got the temperature split to 15 degrees with 4 pounds of refrigerant per the customer’s request. System is somewhat cooling upon departure.
Anna, TX - Upon arrival, I observed that the outdoor suction line was not sweating at all. I proceeded to hook my gauges to the system and found the system to be low on R410a. After speaking with the customer, it was decided to get the system out of freezing but not fill it up. I got the temperature split to 15 degrees with 4 pounds of refrigerant per the customer’s request. System is somewhat cooling upon departure.

Your High Efficiency

Experts