Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in March 2026.
The most recent job was on March 7, 2026.
Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Completed diagnostics on system. I found that there was a fused popped in the furnace. Replaced fuse to see if there was an immediate short. Fuse did not pop immediately but the jumper wires i was using started to melt. I unwired the outside unit to isolate the short. Found the short to be outside. Checked the Contactor outside and was getting a.4 ohms of resistance when it should be 15-2.0 ohms. This tells me the short is in the Contactor and it needs to be replaced. Replaced contactor and unit is now in good working order.
Arrived on site, homeowner had brought up that the unit was giving off a smell while running. I advised I would investigate the smell further. Proceeded with cooling maintainance 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Rinsed condenser unit to promote heat exchange On the inside I found that the ducts, blower wheel and evaporator coil were dirty. Also I found that the filtration system being used is a 4 in fi
Upon arrival, I discovered the compressor overheated. While letting the compressor cool, I checked the capacitor and discovered that it is reading 35/70. This will produce added stress on the compressor. I wired a new capacitor up and started the system. I gauges up and found my pressures were awful. I quickly popped open the coil and found a freezing TXV. The evaporator coil is extremely filthy and the condensing coil is oxidized. I provided 2 estimates. One address the immediate issue only, and the other fixes the issues and cleans the lungs of the system.
I performed a 2 system cooling maintenance on gas system. I checked amps, capacitors, filters, electrical, cleanliness, and safeties. I observed that the blower motor for the down stairs unit needs cleaning, the equipment does not have surge protection, and the capacitor for the upstairs unit is beginning to fail. Customer declined during service.
During our inspection, we found that the blower motor inside your system has failed. The motor is leaking oil and showing signs of internal damage, which is why it is no longer running properly. When this motor stops working, your system cannot move air through your home. Without proper airflow, the system cannot heat or cool correctly and can overheat, freeze up, or cause additional damage to other components. Scope of work: To restore proper operation, we will: Safely shut down and disconnect power to the unit Remove the failed blower motor Inspect and clean the blower wheel and surrounding area Install a new manufacturer-approved replacement motor Replace the capacitor (if required for proper operation) Reassemble and secure all electrical connections Test the system to ensure proper airflow and performance Verify safe and normal operation in both heating and cooling modes Once completed, your system will be able to circulate air properly again, restoring comfort and preventing
Upon inspection I found the blower motor to not be coming on. I tested all electrical going to the blower and was getting proper voltage. I found on inspection of the actual blower itself and found the motor windings to be melted and broken. I provided estimate to have blower motor replaced. Also with this being a r22 unit availability could be limited. Advised client I could have a comfort advisor come out to speak with them to get an option together for replacement.
I performed a single cooling maintenance on a 2021 zoned gas system. I investigated the humidity issue. I tuned the fresh air down to 15mins and adjusted the thermostats to have an overcool of 1 degree. While I was there, I got the humidity to go from 59% to 55%. I showed the customer how to adjust the overcool in the case it needs more time to remove humidity. I checked the amps, capacitor, filter, electrical, cleanliness, drains, and safeties. The system is cooling well, but needs a deep cleaning. The capacitor is reading weak on the compressor side. I presented options to address these issues. The customer declined during service.
1. Rinsed condenser with water to promote heat exchange and reduce stress on system 2. Visually inspected condenser coil for debris/ dirty. 3. Inspected condenser fan motor. 4. Inspected condenser fan blades. 5. Inspected/ cleaned wiring connections. 6. Tested compressor/ condenser fan motor capacitor. 7. Checked compressor amp draw. 8. Checked condenser fan motor amp draw. 9. Inspected / replaced return filter. 10. Inspected return plenum for debris/ dirty. 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel. 13. Checked blower amp draw. 14. Measured temperature differential from supply to return. 20 degrees measured. 15. Inspected drain lines and treated to prevent blockages Found large amount of dust and debris covering outdoor coils. A DIRTY CONDENSER COIL LIMITS AIRFLOW AND LEADS TO HIGHER ENERGY BILLS AND A SHORTER UNIT LIFESPAN. IF LEFT UNATTENDED, DEBRIS CAN CLOG THE COIL. DUE TO STUBBORN DEBRIS, SPECIAL CHEMICALS WILL BE USED TO CLEAN THE COIL with conden
Thank you again for the opportunity to evaluate your HVAC system. We truly appreciate your trust in allowing us to perform a thorough inspection and testing of your equipment. I would like to provide a clear summary of our findings and recommendations: Condensation Drain Lines As part of our evaluation, we poured over a gallon of water through the drain system to properly test drainage. During testing, we heard gurgling noises and observed signs that the drain line is beginning to clog. While it is still draining at this time, buildup is forming and could eventually lead to a backup or overflow if not addressed. We recommend cleaning the drain line proactively to prevent water damage and future service calls. Outdoor Unit – Capacitor (Under Warranty) The capacitor on the outdoor condenser is testing very close to the end of its life expectancy. Although the part is still under manufacturer warranty, it is weakening and could fail unexpectedly. While the part itself is covered, th
1. Rinsed condenser with water to promote heat exchange and reduce stress on system 2. Visually inspected condenser coil for debris/ dirty. 3. Inspected condenser fan motor. 4. Inspected condenser fan blades. 5. Inspected/ cleaned wiring connections. 6. Tested compressor/ condenser fan motor capacitor. 7. Checked compressor amp draw. 8. Checked condenser fan motor amp draw. 9. Inspected / replaced return filter. 10. Inspected return plenum for debris/ dirty. 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel. 13. Checked blower amp draw. 14. Measured temperature differential from supply to return. 20 degrees measured. 15. Inspected drain lines and treated to prevent blockages Found blower wheel is starting to accumulate a good amount of dust. Dust is not entirely coating blades yet. A blower wheel cleaning could be beneficial to the motor life span, but is not urgent at moment. Upon testing the drain line I found it was draining fine through the P-trap. However,

