Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX between August 2025 and September 2025.
The most recent job was on September 5, 2025.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
I preformed a hvac safety check on a 2023 single system gas Trane unit. Spoke with homeowner about any concerns. Homeowner had no concerns at this time. I proceeded to the indoor unit in the garage attic to test all electrical components and overall condition of the unit. All electrical components were testing within manufacturer specifications. I tested the float safety switch to insure that it would shut down the unit if there were to ever be a clog in the drain line. The float switch was working as intended. I check temperature split across the coil. It was coming in at 72.7 degrees from the return vent and 53 degrees coming out of the supply vent. The overall condition of the indoor duct work and unit were in excellent condition. I proceeded to the outside unit to check overall condition and electrical components. I tested all electrical components on the outside unit and all were testing within manufacturer specifications. I tested run and start amps for the compressor and fan mot
Demand call for electric system from 2012 not cooling properly. Upon arrival the customer showed me where everything was located and how she uses the thermostat. She believes that she had the thermostat set incorrectly because after calling us she messed with the thermostat and it started cooling. She normally keeps her house set to 77 but she dropped it down to 76 just to make sure it was working properly and by the time I got to her house it had cooled down to 76. During my inspection I checked electrical components and connections and found the compressor to have high start amps which is causing her contactor to be burning and arcing and her capacitor to be overheating. I brought my finding up to the customer and she decided to leave everything as is for now. Overall the system is running and cooling at this time, customer would like for the office to call and schedule her heat maintenance.
Upon arrival, I found what appeared to be a compressor not coming on. After further investigation, I determined that the system is low on R410a. I hooked my gauges up and discovered that it is completely empty. The factory charge is 4.3lbs of refrigerant. With the line set length, it likely holds around 6lbs of refrigerant. I visually examined for oil residue. I found oil inside of the evaporator coil and this verified that it to be leaking. I checked warranty on the evaporator coil. The equipment was never registered and defaults to 5 years based on the model/serial tag. The tag says it was manufactured in 09/2019. This means the warranty expired in 2024. I spoke with the homeowner about options to address the issue. 1. Add refrigerant (no warranty/guarantee) 2. Add leak seal and refrigerant (no warranty/guarantee) 3. System replacement 4. Do nothing Customer decided to not move forward with any repairs at this time.
Upon arrival, customer showed me where the drain has been dripping outside. I proceeded to the attic to investigate the issue. I found that the primary drain line was clogged. I used a shop vac to remove residual water and attempted to remove some of the gunk from the drain. I blew the drain out and flushed it with water to ensure it was properly draining. I thoroughly evaluated the cooling cycle of the system. While doing this, I discovered that the electrical components in the outdoor unit are at the end of their life. The contactor is ohming at the peak of normal range (20ohms). The capacitor is reading weak on the compressor side (41/45). The compressor is close to pulling over the max amp load (107/109). The outdoor unit is matted with build up. I presented the photo evidence of my findings and provided options to address these issues. Customer approved clearing the drain, but he would like to wait until the beginning of next cooling season to address the other issues.
Returned to replace both damper motors and the capacitor outside under their ten year parts and labor warranty (only capacitor) After repairs I turned the system on and off multiple times to make sure the dampers opened and closed on demand. System is running and cooling properly at this time.
Demand call for zone heat pump from 2021 not cooling properly. Air filter 20*25*4 has been changed recently. Upon arrival customer showed me the thermostats, attic access, and unit outside. They also brought to my attention that there’s some water damage by their return air vent, after further investigation I found the system to be completely frozen inside and out with the fan running causing the ice to melt which is going into the drain line and it’s causing it to sweat more than usual resulting in the ceiling getting water damage. Had to wait for the system to completely thaw out so I had to come back today after having the fan running overnight. During my inspection I checked pressures and they seemed normal, customer did clear out the vines that were covering up the ac unit outside. I went inside to the check the air handler and noticed that one zone damper was partially open and the other one was completely closed, they both should be open because I turned both thermostats on
Demand call for gas system from 2016 with air filter 20*25*1 not cooling properly. Upon arrival the customer showed me the attic access and system outside. He turned the system to cool mode and has it set to 70, his house is 77 degrees right now. During my inspection I checked electrical connections and components, temperatures, and pressures. I found the system to be low on refrigerant, I brought the customer outside to show him pressures. We discussed options and they decided to have me do a leak search to see where the system is leaking from and to see if it’s repairable. I found the system to be leaking from the indoor coil, I took a video and brought the customers up with me so they can see the leak and they can actually hear the leak. The customer wasn’t expecting this and was not prepared to have the replacement conversation. He has a family member that’s in the ac industry and will like to have his opinion before making that big decision. Customer requested a quote for now,
Callback for new system not running and having an alert code of low voltage supply. I believe the area had some kind of power outage and caused the unit to lose communication with each other (outdoor and indoor unit) I cycled power by turning everything off at the main breaker panel, the equipment is labeled “AH” and “AC”. AH- indoor unit AC- outdoor unit I left the power off for about 30 seconds and then I turned on the AC- outdoor unit first then I turned on the AH- indoor unit for it to do the proper connection and to communicate. After cycling power the system turned on, the alert codes were gone, and the system started cooling the building down.
Upon arrival, I found the system was not functioning. I began to verify my power supply. I determined that the main breaker supplying the unit is no longer good. Customer will need an electrician to replace the main breaker before further testing can be done. The system needs 120 volts to work and is only receiving 96 volts.
TAX IS INCLUDED IN LUMP SUM PRICE 1. Enterprise level 870 ft.². Conventional system installation. 3 Ton Heat pump American standard equipment SEER 14 Complete system ductwork metal pipe through the office area. Copper lines Toilet exhaust fan in restroom Total cost $15,672 This estimate is based of the square footage with the customer has provided for all their buildings is all the same. The pricing for the equipment is only good for 15 days day of this estimate is being sent out.

