Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in July 2025.
The most recent job was on July 24, 2025.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 17 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Rinsed condenser unit to promote heat exchange 16. Replaced and dated filters 17. Checked refrigerant pressures and found everything testing to manufacturer specs. Noticed good amount of dust and debris on the coil. I made sure to rinse the coils very well to remove all of the debris blocking the heat exchange on the outdoor unit. Also noted a pretty dirty blower wheel
VIP Annual Maintenance Member Performed AC Maintenance visit - Systems return air plenum, air distribution motor/assembly are still clean. - Replaced/dated homeowner provided 20x25x4 Air Filter - Treated drain lines. System draining properly and not retaining water. - **Shut off valve left open upon departure.** - Provided a demand for cooling at thermostat. - Washed/water rinsed outdoor condenser/heat pump coils. - checked electrical components/amp draws - 45/10 dual run capacitor readings are close to recommended replacement. Expect possible replacement recommendation be made at fall visit. *Leaving estimate for capacitor replacement.* - refrigerant charge is within manufacturer operating specifications. - system providing a 18°F temperature drop across the coil - photo documentation attached - cooling maintenance checklist form filled out and attached. - System cooling, draining, communicating/functioning properly and at manufacture specifications upon departure.
VIP Annual maintenance member. First visit of two visits. Performing Cooling maintenance. Provided courtesy call to homeowner to verify address and to confirm appointment time. (Left voicemail) Upon arrival met homeowner as she was walking up to home finishing her walk. Requested she opened garage for attic access. Technician was just here a week ago for emergency on demand service and replaced outside equipment/condenser 45/5 dual run capacitor under warranty and installation of 20x25x1 filter. Cooling System Maintenance Form Filled Out & Attached. Checked all electrical components, refrigerant charge drain lines, high/low voltage wiring. Treated drain lines with Total C drain treatment. Water Washed/Detailed Outside Condenser coils Made courtesy repair to exposed copper lines in attic. (Tape) Refrigerant charge is at/within manufacturers operating specifications. System provides a 17°F delta temperature drop across the coil and is currently cooling, functioning, draining properly
Replaced failed compressor under warranty coverage. Diagnosed system issue, removed the defective compressor, and installed a new warrantied unit per manufacturer specifications. R-410A refrigerant was not covered under the warranty and required full system recharge. A total of 13 lbs of R-410A refrigerant was added to bring the system to proper operating levels. Verified system performance and confirmed successful operation upon completion.
- Provided courtesy call to verify homeowners appointment time and address. - Homeowner complaint: poor to no airflow on downstairs zone. - Found downstairs Honeywell (power closed) zone damper not functioning properly by not opening all the way when called upon. - Zone motor sustained gear failure and was getting stuck half way while opening preventing proper air distribution - Homeowners authorized estimate for replacement of Honeywell zone damper motor. - After replacement/repairs performed minor AC diagnostics. - 20x25x4 filter clean and pointed correct direction - no air restrictions within air distribution motor/housing - system not retaining water and draining correctly - Thermostats, zone control board, zone damper motors are all now communicating/functioning properly again at this time. - AC maintenance just performed in March 2025. - Technician turned Honeywell whole house ventilation control to off at homeowner request. - Helped homeowner change filter reminder interva
Provided courtesy call to Betty Noe with no answer and left voicemail. Upon arrival met Amy(daughter) in salon. Found high voltage disconnect tripped on outdoor equipment/condenser. Cycled power back on to high voltage disconnect and performed minor diagnostics. Found no immediate cause for break trip. System is 30 year old R22 system. System appears to be slightly low on R22 refrigerant charge. System requires new capacitors, Contactor, hardstart kit, indoor air distribution motor/wheel/housing assembly cleaning, condenser coil chemical clean, indoor evaporator coil cleaning, insulation on refrigerant lines….furnace not safe to operate…etc System providing a 23°F temperature drop across the coil. System currently functioning but not efficiently. *Recommend system replacement ASAP to bring HVAC system up to code. * Estimates sent to customer. * Educated business owner of the condition of hvac system and that the system will continue to give them problems. Owners aware that they’re o
Homeowner complaint: water draining out of secondary onto back porch. Upon arrival found primary drain line clogged/restriction between HVAC drain discharge port on evaporator and ptrap assembly underneath sink. Service provided: Level 1 drain clearing package. Removed retaining water from auxiliary drain pan. Cleared primary drain with nitrogen. Applied total-c drain clearing solution. Tested primary drain with fresh water and opened drain shutoff valve to verify system draining properly again. Also properly tightened camps around hvac hose that attaches to ptrap assembly underneath upstairs sink. Performed sink draining test after repairs and sink still draining slowly but hvac draining properly. Verified thermostats, zone control, and air distribution motors were communicating and functioning properly upon departure. System provided 17.5°F temperature drop across the coil. System currently cooling draining properly again at this time. Recommend: disassembly and clearing of pt
I performed a single system cooling maintenance. The system was installed in 2024 with 10 year parts/labor warranty. I checked amps, filter, electrical, drains, safeties, and cleanliness. The system is performing inside of manufacture specifications. I invested the customer’s concerns involving the thermostats and the dirt at the outdoor unit. I could not get the thermostats to replicate the issue. I instructed the customer to please take a video and send it to our office, if the issue comes back. I seen that the pad for the outdoor unit is supported by bricks underneath. I informed the customer that the dirt that is eroding is cosmetic. I notice the indoor unit does not have a surge protector or a u/v light to combat growth. I provided options to install these add ons to keep the electrical safe and the unit clean.
Homeowner complained of air movement inside not cold. Upflow system. Filter Clean. Evaporator coil intake is clean. Air distribution: motor, wheel, & housing are clean, System not retaining any water/float switch on secondary was dry. Contactor and capacitor still good. Non operating refrigerant charge appears to be good. Put system into cooling test mode in stage 2. Found outside equipment EEV Control board displaying 2 flashes which is internal malfunction fault. Manufacturer recommends replacement of EEV control board. Compressor RLA is exceeding manufacturer’s specifications, making noise consistent with internal valve failure, and has locked up. Attempted cool down period with installation of hard start kit and compressor still unable to startup. System has 10 year parts and labor warranty. Submitting warranty claims for compressor replacement and EEV board replacement. Provided temporary cooling/window units. Office representative is contacting Trane for part availability. Offic
I returned to the Wilson home to replaced failed parts and add the hard start kit also. Once every was installed I tested the unit to ensure it was cooling properly. The home is reading 85° at the thermostat but it is cooling with a great 20° drop. I let her know it would take several hours for the u it to reach the desired set point. I turned the thermostat to cool the home to 80° and let her know once it reached 80 she could adjusted down again to give the system a small break in run time. The unit is cooling properly on departure. Contactor -Turbo Multi Use Capacitor - 5-2-1 Hard Start Kit

