Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in July 2025.
The most recent job was on July 28, 2025.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Provided courtesy call to tenant/ Russ to confirm appointment and verify address. Tenant showed that he replaced his filters and explained that system is dripping water out of secondary onto back porch. Started diagnostics at indoor equipment. Noticed water condensation coming off secondary drain and dripping onto Sheetrock below. Also immediately noticed refrigerant copper line frozen which busted open Armaflex insulation. Removed air handler/evaporator housing access door to inspect to find frozen evaporator coil/thermal expansion valve. Rust developed on high voltage disconnect within air handler. Air distribution assembly motor is functioning Air distribution wheel dirty. Outdoor heat pump/AC coils dirty. Capacitor and contactor readings are still in range Found non operating free standing refrigerant charge is low of refrigerant. Technician unable to complete diagnostics with the system under the current conditions(frozen) Recommend return trip after system thaws completely to
Preformed cooling maintenance on 2018 Carrier heat pump. Tested all electrical components inside. All tested within manufacture specifications. I did notice the blower motor and wheel are dirty with dust/debris. Blower wheel Cleaning estimate offered. Temperature split is 17 degrees across the coil. Treated main drain line with total c. Filter did not need to be changed at this time. Proceeded outside to test outdoor unit. Tested start and run amps. Start amps are testing on the high side. Run amps are testing within manufacture specifications. Tested capacitor and contactor they both tested within manufacture specifications. Provided estimate for a hard start kit to bring down the start amps for the compressor. Rinsed outdoor condenser coil. Unit is cooling upon departure.
Arrived to home not cooling properly on our client had purchased a new thermostat and I verified it was programmed correctly. I proceeded outside to ensure it was working properly and calling for cool. When the outdoor unit kicked on the condenser fan motor had a extremely slow start, indicating it was near complete failure. I took a video of the slow start and explained how if the fan motor was not running properly it can cause overheating and ultimately not allow the system to cool properly. Tammy elected to replace the unit and we discussed options to keep old thermostat but if it presented issues to replace it with the new one. The unit is cooling properly on departure. She is aware it may take several hours to cool down the home.
Arrived to unit not cooling properly. Client noticed issue begging last night. I proceeded outside and immediately found a failed capacitor. Our client has parts and labor warranty on the system so I replaced the capacitor. I checked the start and run amps as well as refrigerant pressures and found everything to be testing within range. The unit did have high start amps and I shared this with Nathan. I sent him an estimate for a hard start kit to help bring the start amps down and prolong the life of the new capacitor and compressor. The unit is cooling with a 20° drop and will take several hours to cool the home. It is running properly on departure.
Returned to home for unit not cooling. Found unit to be in thermal lockout. Called tech support to verify issue. Was able to reset compressor and ran it in cooling for over an hour. I placed my thermometer in the bedroom and on top of the thermostat after letting the unit run for 50 mins. The thermometers were reading 77° the display on the thermostat was 80°. I took the thermostat off the wall and found the space with the wires to be hollow. I attempted to put insulation in the wall cavity with no real success. The thermostat immediately climbed up to 84°. I will return with spray foam insulation and seal the cavity behind the thermostat to address the temperature discrepancy that is being displayed.
Upon arrival, I found that the zone system is programmed the correct way. I confirmed that both of my zone dampers mare fully operational when a call for cooling occurs. The ducts come off of the unit and go to another plenum. From what I can tell, the ducts on the addition plenums have dampers and can be adjusted. There will need to be 2 people for this type of work. This would allow us to monitor the airflow with a device and make adjustments simultaneously. The attic space has limited access to the downstairs portion of ducts.
I arrived to clients concern that the unit was not cooling properly. I began to test the unit in first and second stage cooling. I put the system into test mode from the thermostat. It ran fine for 15 mins without issues. I then ran the system normally in first stage for 30+ mins and measured the supply and return temperatures as well as refrigerant pressures. It was cooling properly without any issues in first stage. I turned the temperature set point down to 66° to allow the unit to organically go into second stage. When it did go into second stage cooling I again measured temperatures and refrigerant pressures. The home and thermostat reached 75°. I asked what a comfortable set temperature was and did not get a number so I left the thermostat set to 76°. We will continue to monitor the system performance. But I was unable to replicate an issue and there were no alerts on the thermostat present. The system was cooling on departure.
VIP Annual Maintenance Member Performed AC Maintenance visit - Provided a demand for cooling at thermostat. - Systems return air distribution plenum just cleaned. - Air distribution motor/assembly/wheel slightly dirty. - Replaced/dated homeowner provided 20x25x4 Air Filter - Treated drain lines. System draining properly and not retaining water. - Made courtesy repair to existing float switch. - Properly mounted switch onto emergency pan correctly and properly wired switch to outside equipment. After proper installation…performed test on float switch. - Washed/water rinsed outdoor condenser coils. - checked all electrical components/amp draws - refrigerant charge is within manufacturer operating specifications. - system providing a 16+°F temperature drop across the coil - photo documentation attached - cooling maintenance checklist form filled out and attached. - System cooling, draining, communicating/functioning properly and at manufacture specifications upon departure. Recomme
I arrived at our clients home for water coming out of the attic air handler unit and presenting itself in the ceiling. The unit had been off since 8 PM the night before I immediately proceeded to the outdoor unit and engaged up to ensure the unit was not freezing over due to low refrigerant pressures. I let the unit run and then proceeded back upstairs. The single system is connected to two separate zone upstairs and dampers, The upstairs zone was not calling to cool. I asked the homeowner to turn on the upstairs thermostat and found that the upstairs zone damper motor was struggling to open. I shared my findings with Mrs Johnson and we discussed how the damper motors normally spring open and energize closed if only the upstairs thermostat was calling for cool, but the motor was not opening. This would cause the extremely cold air to be trapped, causing back pressure, moisture buildup, and ultimately the water damage in the ceiling. Outside I also found the capacitor to be below normal
I performed a general inspection on a 2016 Lennox gas system. I thoroughly examined the electrical, drains, safeties, cleanliness, and refrigerant. The system temperature split came out to 18 degrees. I believe it would be a solid 20 degrees, if the outdoor was washed. The homeowner agreed to address the washing the outdoor unit herself. All other electrical components tested in range and the system is performing inside of manufacture specifications.

