Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in June 2025.
The most recent job was on June 10, 2025.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Preformed cooling maintenance. Tested all electrical components on the inside and outside start and run amps on fans annd compressor motors. All tested within manufacture specifications. The client did mention that the master bedroom was a little warmer than the rest of the house, adjusted dampers to regulate airflow to the master bedroom. Also noticed the attic could use more insulation near the master bedroom supply. Upon further inspection of the inside unit we noticed the drain pan to have rust spots and calcium deposits on the underside of the unit. Upon further inspection of the outside unit we found the contactor to be reading high and is pitted on the contacts. We provided estimates for a new contactor, drain pan and insulation.
Client already has a friend that preforms the maintenance for his hvac equipment. He is concerned about dust/black particles coming into the home. I went into the attic and took pictures of the dirt and debris collected. We discussed blower wheel cleaning and dryer vent cleaning and Mike will have his service tech clean the blower motor. He did elect us to preform the duct cleaning service and we are scheduled for later this month. Initial Deposit collected of $435 Client agrees to pay $430 on July 17th And remaining amount on August 21th to complete payment in full Wednesday the 18th 1pm. For duct cleaning service and dryer vent cleaning.
Inspected supply and returns. 10 supply and 1 return. Floor vents. 3 small 2-3inch vents. No ladder required. 250 deposit on Monday customer will call in. Schedule for next Thursday when they have the money.
Performed a 2 system spring maintenance ( gas). Tasks performed. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked refrigerant pressures. 7. Checked compressor amp draw. 8. Checked condenser fan motor amp draw. 9. Inspected / replaced return filter. 10. Inspected return plenum for debris/ dirty. 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel. 13. Checked blower amp draw. 14. Measured temperature differential,,,upstairs was 12 degrees split differential,,,homeowner will monitor the unit and keep us updated. 15. Inspected drain lines. 16. Washed condenser unit. 17. Tested contactor.
I replaced the defrost board and tested the unit. The unit is cooling properly besides the clogged drain line. Customer wants to try and clear it himself. I ran the unit for 20mins without interruption. I messed with the wires in attempt to make it fail. Replacing defrost board for discounted rate of $350<div><br></div><div>1 year warranty included with the defrost b</div>
I found the G wire was broken inside of the wire nut. I repaired the connection and tested the system. The system is cooling. We need to send this invoice and past invoice to PO Box 306 in Anna, Tx.
Upon arrival, I found the system working. I sat with the outdoor unit for a bit to investigate the customer’s concerns. The unit ran for a while then shut off. I examined the unit and verified that my pressures are good and pressure switches are working. The defrost board is not passing power out to the contactor. We will need to get a price on Monday and reach out. Customer wants someone of importance to reach out to him on Monday, also.
We arrived at our client’s home for a two system maintenance cooling inspection today. We began by locating both indoor units in the main hallway attic. Our client has four systems on the home, but we only provided maintenance for the two new units. Our client have recently replaced the air filters for both systems and did not need them replaced today. We then proceeded outside and began to test and inspect the electrical components for both outdoor units. Everything passed inspection and is testing within manufacturers specifications. With the exception of the start amps for the downstairs system. The unit is rated for 139 amps and is starting at 144 amps today. We did find that the unit on the left for the downstairs has an additional load amp protector attached to it. This was installed after the equipment and is part of the generator install. We noticed that the electrical whip was crooked and water tight connection was installed improperly and had a gap to the box. When we opened
We arrived to our clients home for a second opinion regarding a zone control board and corresponding motors. Our client informed us that another companies had come out and diagnosed a failed board. Before they had arrived the unit was on and cooling but after they left the unit never kicked on and never cooled the home. We proceeded to do a full and complete diagnostic of the system. Outside we immediately found the outdoor disconnect to be opened and turned off. We tested the electrical components of the outdoor heat pump and turned it on. Everything was tested within normal manufacture specifications today. We showed this to our client and then proceeded to the attic to test and inspection the zone control board and the 2 corresponding motors for up and downstairs zones. We tested the boards and ensured everything was sending the correct voltage and then connected the motors and also confirmed the motors were responding properly. We took pictures and videos and informed our client
Preformed two system cooling maintenance. Test all electrical components on both units, including start and run amps for the compressor and fan motors, tested blower motor amps on both inside units. Everything tested within manufacture specifications. We did notice both units could benefit from have a safety switch and blow out valves. Spoke to client about the benefits of having both installed. We provided estimates or both.

