Menu

Heating and Air Conditioning Services in Anna, TX

Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.

Schedule Service in AnnaCall (903) 482-4900

HVAC Services in Anna, TX

Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:

AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.

AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.

Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.

Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.

Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.

Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.

Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.

HVAC Services for Anna’s Growing Neighborhoods

Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.

For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.

Why Anna Homeowners Choose Adon Complete

Schedule Service in AnnaCall (903) 482-4900

Frequently Asked Questions

Here are some answers to common questions we get about our Anna HVAC services.

How much does AC repair cost in Anna, TX?

Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Anna?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.

What HVAC brands do you service in Anna?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.

Do you offer HVAC maintenance plans in Anna?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.

What areas near Anna do you serve?

We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.

Schedule HVAC Service in Anna Today

We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in AnnaCall (903) 482-4900

Recent Jobs and Reviews in Anna, TX

Rated 4.9 out of 5 stars based on 67 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Anna, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX between May 2025 and June 2025.

The most recent job was on June 5, 2025.

Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.

Job Locations

Shelby S.
Shelby S.
Preformed cooling maintenance. Tested all electrical components inside and outside. Tested start amps, run amps, capacitor and contactor. All components tested within manufacture specifications. Filter needs to be changed but client did not have one for us to change 20x20x1. Treated drain line with total -c. Provided estimates for blower wheel cleaning, condenser cleaning and safety switch. Upon departure unit was cooling.
Anna, TX 75409
Brayden W.
Brayden W.
QC delta T was initially low 14-15 degrees. Checked pressures; superheat 8 subcool of 2-3 and low head pressure. Added refrigerant 12oz. Pressures normalized difference between supply and return measuring 20. Also found float switch wired incorrectly. Addressed the issue and rewired the float switch. Unit in good working order upon departure.
Anna, TX 75409
Jacob P.
Jacob P.
Process warranty under parts for Manufacture.. Remove all refrigerant from system recovery tanks. Remove coil from system. Chemical flush on copper lines to remove non-condensibles. Install new evaporator coil Confirm system is tight and sealed on all welds. Pressurize system with nitrogen 300 pounds to verify no leaks. Wait for 30 minutes to see the system holds up on pressure for 30 minutes 300 pounds. Completion of leak check. Put a vacuum on the system to remove any moisture in air. Evacuate system under 500 µm. Completion of evacuating a system. Put refrigerant in the system before starting up. Start the system up. Run system for 20 minutes before Commissioning the system. Factory refrigerant charge the system to manufacture specs.
Anna, TX 75409
Shelby S.
Shelby S.
Performed single system cooling maintenance. The system is from 2013 and is gas. The unit is showing signs of a faulty thermostat and high start amps. The unit will start and begin to cool and over a minute of show has the possibly of going into a time delay on the thermostat. The backlight also keeps randomly lighting up. The compressor is pulling 116/112 amps on start up. This leads to permanent damage to the compressor and could cause the internal windings to break. I offered to install a new thermostat and hard start kit. The customer declined during the maintenance. I spoke about the unfortunate refrigerant change as of Jan 1, 2025 and the details associated with it.
Anna, TX 75409
Jesse V.
Jesse V.
Went to the customer house to verify if the heat pump reversing valve is not functioning 1. Test 24 V going to the reversing valve solenoid. There is accurate 24 V going to the solenoid.. 2. Also installed a transformer on the outside unit to verify it is a strong 24 V going to the solenoid. 3. The solenoid valve in reverse valve did not make any effort to open. 5. Made several attempts on energizing deenergizing the solenoid to get the valve to move in the cooling position. 6. Install team was with Jesse on site to verify as well the solution problem. Determine the reversing valve is not functioning to open close. 7. Install team has started to work on replacing the valve. valve replaced and system is cooling. Customer requested surge protector to be installed. installed and tested functionality. It is good to go.
Anna, TX 75409
Brayden W.
Brayden W.
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Washed condenser unit to promote heat exchange Contactor burn marks high resistance. Low compressor capacitor. High start amps. Recommended for electrical rebuild. Advised customer this is not an emergency, however these issues should be addressed soon. At the very latest next yr this time.
Anna, TX 75409
Shelby S.
Shelby S.
Upon arrival, I found the system in question to be low on R410a. Customer only wanted me to charge it up and is aware that there is no warranty associated with this band-aid repair. I added 4 pounds of refrigerant and it could’ve used another pound. Customer requested I check the charge on the other unit. When i started the suction was 75 on suction, 260 on liquid, 35 super heat, and negative sub cool. I offered leak seal and the customer declined.
Anna, TX 75409
Cesar O.
Cesar O.
Performed a 1 system spring maintenance ( heat pump). Tasks performed. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked refrigerant pressures. 7. Checked compressor amp draw. 8. Checked condenser fan motor amp draw. 9. Inspected / replaced return filter. 10. Inspected return plenum for debris/ dirty. 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel. 13. Checked blower amp draw. 14. Measured temperature differential . 15. Inspected drain lines. 16. Washed condenser unit. 17. Tested contactor.
Anna, TX 75409
Jacob P.
Jacob P.
Returned to home to complete installation of new compressor and new solenoid for reversing valve. Our client also had the electrician out to replace the failed breaker. Once the solenoid was installed I was able to finish the charge up of the unit. I charge up an additional 5lbs of Freon and ensure the unit was cooling properly with a 20° drop. I informed our client she needed to let the unit run for a couple more hours. I set the thermostat to 69° and it is currently 75° inside. Upon arrival the thermostat was reading 78°. She normally keeps the thermostat set to 79° and we discussed adjusting the temperature only after the system reached the 69° set point.
Anna, TX 75409
Cesar O.
Cesar O.
Performed a 1 system spring maintenance ( heat pump). Tasks performed. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor,,,noticed the unit doesn’t have surge protection,, will bring this up to the customer. 6. Checked refrigerant pressures. 7. Checked compressor amp draw. 8. Checked condenser fan motor amp draw. 9. Inspected return filter,,, it’s very dirty, homeowner will replace it later on. 10. Inspected return plenum for debris/ dirty. 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel. 13. Checked blower amp draw. 14. Measured temperature differential . 15. Inspected drain lines. 16. Washed condenser unit. 17. Tested contactor. Found no issues , unit is cooling properly at this time. Unit is in brand new condition.
Anna, TX 75409

Your High Efficiency

Experts