Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in April 2025.
The most recent job was on April 23, 2025.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
I arrived at our Pines home for a single system cooling maintenance. Our client had recently replaced his air filter and did not need them changed today. I began at the outdoor unit by checking all the electrical components. Everything passed inspection and tested within range today. I then washed the outdoor coil as part of today’s maintenance. Then proceeded inside to the attic air handler and tested the blower motor. I use total C down the primary drain line to help prevent future plugs. I did find bacterial growth inside the evaporator coil and I showed this Torline. She was not concerned with cleaning at this time. The unit is cooling and running properly on departure.
I arrived to our clients closet unit dripping water. He had replaced the air filter yesterday and today could audibly hear water dripping from the unit. I first confirmed that the unit was not frozen over. I then was able to see inside the primary drain line and found standing water. I discussed option with our client regarding the cleaning and adding a blow out valve. As well as adding a water shutoff switch. Mr Pham declined the water safety at this time and only wanted to proceed with the ball valve and clearing. We are scheduled to preform the service Friday. He is also going to dry up the water that is underneath the unit to help prevent mildew.
I returned today to complete previously scheduled repairs. I began by removing and replacing the compromised drain pan. I installed the new replacement drain pan and then proceeded to install the water safety switch and blow out valve. Once installed I tested the water safety switch to ensure it was working properly. Everything is running properly on departure.
Level 1 duct cleaning performed 10 supply 3 returns no upstairs
Returned to complete previously scheduled work. Upon arrival I had to clarify with Juan that I was mistaken and could not perform the Aprilaire conversion kit on the existing return cabinet. I clarified that the true conversion to a larger 4” cabinet would be more expensive and I sent an estimate for the correct cabinet installation. Once everything was discussed and clarified. I proceed to remove and clean the blower wheel assembly. Once chemically washed and dried, I assembled everything back together and proceed to test the motor to ensure proper function. Everything was working correctly and our client had also noticed an improvement in air quality since installing the air scrubber. Everything is working properly on departure.
Arrived at our clients home for a single system maintenance inspection. I began by running our air advice machine to inspect the quality of the air in the home. I then proceeded outside to test the electrical components of the condenser unit. Everything passed inspection except for the start amps of the compressor. They were exceeding the max limit from the manufacturer. I showed this to our client and also showed him the dust collected on the outdoor coil. Once washed and rinsed, I went into the attic to test the temperature drop and blower motor. The blower motor is also reading high amps due to the dust collected on it. The system is also without a water safety switch and has a cabinet for only a 1 inch filter. I showed my findings to Juan and we discussed options to clean and address the compressor as well as indoor air quality. He elected to install a larger filter cabinet, the hard start kit, air scrubber and clean the blower assembly. I did complete the hard start kit and air
Trane XR15 Single Speed Air Heat Pump (NEW) 2025 SEER2 Outside unit: Air Handle Evaporator Coil: Thermostat WIFI Home Phone App Capacity 3 Ton Climatuff: Single stage Speed Compressor ADON CARE CLUB MAINTENANCE PLAN 1 Year Maintenance (Spring / Fall safety checks) Protects your manufacturer warranty Prolongs the life of your cooling and heating system Trane Manufacture Extended Warranty 10 - Year Compressor Warranty 10 - Year Parts Warranty **** Labor Warranty **** 10 Year Labor Warranty: JB Warranty & Associates Registered by Adon CPS Quality Control follow up visit by Senior Technician What's Included with Install Material/ Parts Hung - Rite: Equipment Hanging System in Attic: Breaker Disconnect Box R410A Refrigerant Electrical Whip Cement Condenser Pad Up to 4 bags Dirt for leveling Secondary Auxiliary Drain Pan Drain Line installation - Up to 6 Ft SS1 Emergency shut off Float Switch Quick Blast Valve for Drain maintenance Foil Tape PVC Fittings Super RX-11 Flush,
Performed 2 system cooling maintenance. I checked amps, capacitors, drains, cleanliness, electrical, safeties, temperature differential, and refrigerant temperature. The system are cooling well. However, I did provide options to further protect the home and to be proactive about soon to be issues. I provided options for back up float switch in the case the current ones fail to do their job. The blower for the upstairs unit has build up on it. This results in the blower working twice as hard to perform and will lead to failure. The outdoor unit for the downstairs has a capacitor that is on the borderline of being out of spec. This part is responsible for starting the compressor and fan on the outdoor unit. I provided pricing to perform a drain treatment to prepare the drains for summer time.
Performed a 2 system spring maintenance ( gas). Tasks performed. 1. Visually inspected condenser coil for debris/ dirty,,recommended surge protector for both units. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked refrigerant pressures. 7. Checked compressor amp draw. 8. Checked condenser fan motor amp draw. 9. Inspected / replaced return filter. 10. Inspected return plenum for debris/ dirty. 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel. 13. Checked blower amp draw. 14. Measured temperature differential . 15. Inspected drain lines. 16. Washed condenser unit. Found no issues/ concerns at this time
Performed single system cooling maintenance. I checked amps, capacitor, filter, cleanliness, ducts, drains, electrical, temperature differential, and refrigerant temperature. The system is cooling mostly within manufacture specifications. I noticed some issues with the system that can cause harm to the equipment and home. The ducts could use some cleaning. Excessive dust in the duct system causes other components to become dirty. This will make the system inefficient and start to strain to perform its normal duties by clogging the filter faster, making the blower motor dirty, and clogging the evaporator coil. The current float switch the system has is near useless. The design of the drains will bypass it until it has a major drain issue. I suggest that a float be added on the primary drain to detect clogging earlier. This would allow us to address it while it’s still a small issue. The blower motor has some build up present. This results in the blower having to work harder and can cau

