Denison is one of Grayson County’s most established cities, with a historic downtown that just won the Greatest American Main Street Award in 2025 and neighborhoods that have been around for decades. The homes here are not new construction. They’re established properties with HVAC systems that have real history behind them, and they need a company that knows how to work on all of it. Adon Complete Air Conditioning and Heating has been providing heating and air conditioning service in Denison, TX, for years, and we run calls here regularly. We’re based in Anna, just down Highway 75, and we’re available 24 hours a day, 7 days a week.
The Reality of HVAC in Denison
Denison homes tend to be older, and the HVAC systems reflect that. Our technicians have found evaporator coils in Denison that have never been cleaned, condensers blocked so severely with debris that they could only cool the air by 6 degrees, blower motors that have failed from years of restricted airflow, and R-22 refrigerant systems that are beyond repair and need replacement. We have also found plenty of systems in great shape that just need regular maintenance to stay that way.
The point is this: if you have not had your system serviced in a while, Denison is a place where that matters. A system running at 6 degrees of cooling when it should be running at 18 to 20 is working twice as hard for half the result. Getting a set of professional eyes on it costs a fraction of what an emergency repair costs in August.
HVAC Services We Provide in Denison
AC Repair. We carry common parts on our trucks and handle all makes and models. We resolve most Denison repair calls in a single visit.
AC and Heating Installation. When a system is beyond repair or simply not worth fixing, we provide an honest assessment and a clear replacement price. Every new installation comes with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and covers two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. A maintenance visit helps us catch failing capacitors, clogged drain lines, and dirty coils before they become emergency calls.
Air Duct Cleaning. Older Denison homes often have ductwork that has accumulated years of debris. Our technicians have recommended full system cleanings on multiple Denison service calls this year. A thorough duct cleaning makes a real difference in both air quality and system efficiency.
Air Duct Repair and Sealing. Rodent damage, disconnected ductwork, and aging flex duct are common in Denison homes. Leaky ducts can account for 20 to 30 percent of your system’s output loss. We find and fix them.
Indoor Air Quality. Years of accumulated dust and biological growth on evaporator coils and in ductwork are a real issue in established homes. We offer air filtration systems, UV purifiers, and a free “What Are You Breathing?” screening for Denison homeowners.
Mini-Split Installation. For Denison homes with additions, sunrooms, or spaces where extending ductwork is not practical, mini-splits provide clean, independent cooling and heating without touching the central system.
Heat Pump Installation and Repair. We install and service heat pump systems throughout Denison and Grayson County. A heat pump handles both heating and cooling from a single unit and can be a good option when replacing aging single-purpose equipment.
Adon Complete in Denison
Owner Jesse Villarreal has over 27 years of HVAC experience. We are a Trane Comfort Specialist and Mitsubishi-authorized dealer, which means factory-trained technicians and the full manufacturer warranty on every system we install. We service all brands. We work in Denison regularly and know what the homes here need. Our technicians explain what they find before doing any work, and we don’t push repairs or replacements that aren’t warranted.
One of our Denison customers left a detailed review after our technician, Alex, repaired ductwork in her attic, explained every step of the process, and even helped her address a rodent issue that caused the duct damage. That is the standard we hold ourselves to on every call.
Serving Denison and Grayson County
We serve all of Denison, including Thompson Heights, the downtown historic district, and the neighborhoods along Highway 75. We also serve surrounding Grayson County communities, including Sherman, Van Alstyne, Pottsboro, Gordonville, and Whitesboro.
Questions Denison Homeowners Ask Us
My AC is running, but the house isn’t cooling down. What’s going on?
This is one of the most common calls we get in Denison. The system is running, but airflow is so restricted by dirty coils, a clogged filter, or blocked ductwork that it cannot transfer heat effectively. We have found systems in Denison cooling only 6 degrees when they should be cooling 18 to 20. A diagnostic visit will tell you exactly what is happening. Call (903) 482-4900 to schedule.
I have an older R-22 system. What are my options?
R-22 refrigerant is no longer being manufactured. If your system has a significant refrigerant leak, the practical answer in most cases is to replace it. We will tell you honestly when a repair makes sense and when it does not. If replacement is the right call, we will walk you through your options and give you a clear price before any work is done.
How do I know if my ductwork needs cleaning or repair?
Signs include uneven cooling between rooms, visible dust near supply vents, musty odors when the system runs, or a system that is working harder than it should. Our technicians have found disconnected ducts, rodent damage, and years of debris buildup in Denison homes during routine service calls. A professional duct cleaning and inspection is the only reliable way to know what is in there.
Do you offer HVAC maintenance plans in Denison?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. For Denison homeowners with older systems, staying on a maintenance schedule is one of the best ways to catch small problems before they become expensive ones.
Do you offer emergency HVAC service in Denison?
Yes. We are available 24 hours a day, 7 days a week throughout Denison and Grayson County. When you call after hours, you reach a real person. Call (903) 482-4900 any time.
Schedule Heating and Air Conditioning Service in Denison
If your system hasn’t been serviced recently or you have noticed a change in performance, call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online. We know Denison, and we are ready to help.
Recent Jobs and Reviews in Denison, TX
Denison, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Denison, TX between March 2026 and April 2026.
The most recent job was on April 24, 2026.
Adon Complete Air Conditioning and Heating has completed 85 jobs in Denison, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Upon arrival client stated here was no cool air being blown out of the vents in cooling mode. I noticed there was no condenser outside where it should be. I asked the homeowner if she knew she didn’t have one. We walked around the house to insure that it wasn’t moved to a different location. I did not find a condenser. It looks like the unit was cut out for unknown reasons. Offered to have comfort advisor come out but client would like to get back with us on it. The air handler is from 2021 it’s does function in heating.
Performed maintenance on 2022 Trane furnace. 1. Visually inspected condenser coil for leaks and abnormalities. 2. Inspected condenser fan motor, blades and bearings. 3. Inspected, cleaned, and, tightened wiring connections. 4. Measured capacitance of compressor/fan motor capacitor. 5. Inspected and measured resistance of contactor 6. Measured compressor current draw. 7. Measured condenser fan motor amp draw. 8. Inspected and replaced return filter. 9. Inspected return plenum for dust or debris. 10. Inspected evaporator coil for cleanliness and oxidation. 11. Inspected blower motor/ blower wheel for dust and debris 12. Measured blower motor current draw. 13. Measured temperature differential from supply to return. 14. Tested drain lines for proper drainage and treated to prevent blockages. 15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. Only measured 58-59 degree air supply. 75 return temp. Noticed blower wheel was star
1. Visually inspected condenser coil for leaks and abnormalities. 2. Inspected condenser fan motor, blades and bearings. 3. Inspected, cleaned, and, tightened wiring connections. 4. Measured capacitance of compressor/fan motor capacitor. 5. Inspected and measured resistance of contactor 6. Measured compressor current draw. 7. Measured condenser fan motor amp draw. 8. Inspected and replaced return filter. 9. Inspected return plenum for dust or debris. 10. Inspected evaporator coil for cleanliness and oxidation. 11. Inspected blower motor/ blower wheel for dust and debris 12. Measured blower motor current draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested drain lines for proper drainage and treated to prevent blockages. 15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. Noticed no search protection on either outdoor unit. Advise. Search protection to protect expensive circuit
Performed maintenance on 2018 Trane heatpump and 2024 Trane Minisplit. 1. Visually inspected condenser coil for leaks and abnormalities. 2. Inspected condenser fan motor, blades and bearings. 3. Inspected, cleaned, and, tightened wiring connections. 4. Measured capacitance of compressor/fan motor capacitor. 5. Inspected and measured resistance of contactor 6. Measured compressor current draw. 7. Measured condenser fan motor amp draw. 8. Inspected and replaced return filter. 9. Inspected return plenum for dust or debris. 10. Inspected evaporator coil for cleanliness and oxidation. 11. Inspected blower motor/ blower wheel for dust and debris 12. Measured blower motor current draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested drain lines for proper drainage and treated to prevent blockages. 15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. Capacitor was testing low but within
I performed a single cooling maintenance on a gas system. The furnace is from 2013 and the evaporator coil/condenser are from 2021. I throughly examined the amps, capacitors, filters, electrical, drains, rinsed the outdoor unit, cleanliness, and safeties. I discovered a couple of deficiencies during today’s visit. I noticed that the outdoor unit and blower wheel are in need of cleaning. The outdoor unit being dirty causes strain on the electrical components and reduced performance of the equipment. The blower wheel being dirty causes similar issues. In addition to those issues, it will wear the motor down faster causing premature failure. The outdoor unit currently does not have surge protection. The capacitor power the compressor is testing out of range and failing. This adds unnecessary stress to the compressor. I provided options to address these items during service. Customer declined all options during time of service, and the system is cooling upon departure.
Upon completion of my thorough evaluation of the ducts and inside system, I found the blower wheel to be extremely dirty. This can push the dust onto the evaporator coil as well. Affecting air quality, performance and efficiency of the unit itself. The client stated he is having a lot of dust come out when the unit comes on. By having the full system cleaned we can help combat some of the allergens.
Upon completion of my thorough evaluation of the downstairs system. I found that the evaporator coil, blower wheel and condenser coil could benefit from having a cleaning done. By cleaning these major components you can keep the unit running at peak performance and efficiency. All other electrical components tested within manufacturer specifications. The outside unit was testing within manufacturer specifications. I rinsed the outside unit with water. The upstairs unit was down upon arrival. After my thorough evaluation I found the compressor windings from common to start and run terminals were testing at 87 ohms with no continuity. Which tells me the compressor windings are bad. I presented findings to the homeowner and she elected to hold off for any type of replacement right now.
Upon arrival, I discovered that the system was giving a stuck open pressure switch error code. I followed the power coming out of the control board through the pressure switch and back to the control board. The pressure switch is operating properly. I determined it was making bad contact back at the control board simulating the pressure being open. Amana and Goodman units are known for this issue. I tightened the connections in the plug and control board. The system powered on and I tested the heating. The system is heating well, but this issue could come back. I offered to replace the control board. I referenced a universal board that I have in my van. According to the information with the universal control board, it is not an option for this model of control board. I called standard supply, and they were closed for the day. We will reach out in the morning to price a replacement control board.
Upon arrival, I discovered that the electrical plug that the system was using for a power source was becoming faulty. I moved the plug to a different location and got the unit working. I tested the system and spoke with the homeowner about options. After a in depth conversation, the homeowner elected to invest into a new system before summer arrives. The system is known to have a R22 refrigerant leak that dates back to July 2025. The install is scheduled for 3/21/2026 at 8am to 9am arrival time. I waved the service fee during the visit.
Upon testing the outdoor unit, I found the capacitor to be testing at about 6mfd out of 40. This would cause the compressor to not be able to pump. Replaced capacitor and tested unit to ensure functionality. Found all to be working well with normal unit operation. 54 degree supply measured. Found drain line clogged and leaking at the sink. Drain line is draining out of secondary drain line for the time being. However there is a lot of rust in the drain pan and it is only a matter of time until the water in the pan rusts through and comes through the ceiling. Homeowner would like to try to remedy the issue himself. Homeowner would like to schedule a Mid April Friday midday 10-2. Unit in good working order upon departure.

