Menu

Heating and Air Conditioning Service in Denison, TX

Denison is one of Grayson County’s most established cities, with a historic downtown that just won the Greatest American Main Street Award in 2025 and neighborhoods that have been around for decades. The homes here are not new construction. They’re established properties with HVAC systems that have real history behind them, and they need a company that knows how to work on all of it. Adon Complete Air Conditioning and Heating has been providing heating and air conditioning service in Denison, TX, for years, and we run calls here regularly. We’re based in Anna, just down Highway 75, and we’re available 24 hours a day, 7 days a week.

Schedule Service in DenisonCall (903) 482-4900

The Reality of HVAC in Denison

Denison homes tend to be older, and the HVAC systems reflect that. Our technicians have found evaporator coils in Denison that have never been cleaned, condensers blocked so severely with debris that they could only cool the air by 6 degrees, blower motors that have failed from years of restricted airflow, and R-22 refrigerant systems that are beyond repair and need replacement. We have also found plenty of systems in great shape that just need regular maintenance to stay that way.

The point is this: if you have not had your system serviced in a while, Denison is a place where that matters. A system running at 6 degrees of cooling when it should be running at 18 to 20 is working twice as hard for half the result. Getting a set of professional eyes on it costs a fraction of what an emergency repair costs in August.

HVAC Services We Provide in Denison

AC Repair. We carry common parts on our trucks and handle all makes and models. We resolve most Denison repair calls in a single visit.

AC and Heating Installation. When a system is beyond repair or simply not worth fixing, we provide an honest assessment and a clear replacement price. Every new installation comes with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club is $12 a month and covers two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. A maintenance visit helps us catch failing capacitors, clogged drain lines, and dirty coils before they become emergency calls.

Air Duct Cleaning. Older Denison homes often have ductwork that has accumulated years of debris. Our technicians have recommended full system cleanings on multiple Denison service calls this year. A thorough duct cleaning makes a real difference in both air quality and system efficiency.

Air Duct Repair and Sealing. Rodent damage, disconnected ductwork, and aging flex duct are common in Denison homes. Leaky ducts can account for 20 to 30 percent of your system’s output loss. We find and fix them.

Indoor Air Quality. Years of accumulated dust and biological growth on evaporator coils and in ductwork are a real issue in established homes. We offer air filtration systems, UV purifiers, and a free “What Are You Breathing?” screening for Denison homeowners.

Mini-Split Installation. For Denison homes with additions, sunrooms, or spaces where extending ductwork is not practical, mini-splits provide clean, independent cooling and heating without touching the central system.

Heat Pump Installation and Repair. We install and service heat pump systems throughout Denison and Grayson County. A heat pump handles both heating and cooling from a single unit and can be a good option when replacing aging single-purpose equipment.

Adon Complete in Denison

Owner Jesse Villarreal has over 27 years of HVAC experience. We are a Trane Comfort Specialist and Mitsubishi-authorized dealer, which means factory-trained technicians and the full manufacturer warranty on every system we install. We service all brands. We work in Denison regularly and know what the homes here need. Our technicians explain what they find before doing any work, and we don’t push repairs or replacements that aren’t warranted.

One of our Denison customers left a detailed review after our technician, Alex, repaired ductwork in her attic, explained every step of the process, and even helped her address a rodent issue that caused the duct damage. That is the standard we hold ourselves to on every call.

Serving Denison and Grayson County

We serve all of Denison, including Thompson Heights, the downtown historic district, and the neighborhoods along Highway 75. We also serve surrounding Grayson County communities, including Sherman, Van Alstyne, Pottsboro, Gordonville, and Whitesboro.

Schedule Service in DenisonCall (903) 482-4900

Questions Denison Homeowners Ask Us

My AC is running, but the house isn’t cooling down. What’s going on?

This is one of the most common calls we get in Denison. The system is running, but airflow is so restricted by dirty coils, a clogged filter, or blocked ductwork that it cannot transfer heat effectively. We have found systems in Denison cooling only 6 degrees when they should be cooling 18 to 20. A diagnostic visit will tell you exactly what is happening. Call (903) 482-4900 to schedule.

I have an older R-22 system. What are my options?

R-22 refrigerant is no longer being manufactured. If your system has a significant refrigerant leak, the practical answer in most cases is to replace it. We will tell you honestly when a repair makes sense and when it does not. If replacement is the right call, we will walk you through your options and give you a clear price before any work is done.

How do I know if my ductwork needs cleaning or repair?

Signs include uneven cooling between rooms, visible dust near supply vents, musty odors when the system runs, or a system that is working harder than it should. Our technicians have found disconnected ducts, rodent damage, and years of debris buildup in Denison homes during routine service calls. A professional duct cleaning and inspection is the only reliable way to know what is in there.

Do you offer HVAC maintenance plans in Denison?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. For Denison homeowners with older systems, staying on a maintenance schedule is one of the best ways to catch small problems before they become expensive ones.

Do you offer emergency HVAC service in Denison?

Yes. We are available 24 hours a day, 7 days a week throughout Denison and Grayson County. When you call after hours, you reach a real person. Call (903) 482-4900 any time.

Schedule Heating and Air Conditioning Service in Denison

If your system hasn’t been serviced recently or you have noticed a change in performance, call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online. We know Denison, and we are ready to help.

Schedule Service in DenisonCall (903) 482-4900

Recent Jobs and Reviews in Denison, TX

Rated 4.9 out of 5 stars based on 7 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Denison, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Denison, TX between January 2026 and March 2026.

The most recent job was on March 4, 2026.

Adon Complete Air Conditioning and Heating has completed 85 jobs in Denison, TX in the last 12 months. The first job there was in March 2020.

Job Locations

Matthew C.
Matthew C.
Performed cooling seasonal safety check. I tested all electrical components on the inside unit along with cleanliness. All electrical components were testing within manufacturer. I found that he blower wheel and evaporator coil could both benefit from having a deep cleaning done. I proceeded outside where I tested all electrical components on the outside unit. All tested within manufacturer specifications. The start amps on the compressor were starting high at over 100 amps. By adding a hard start kit it can help assist those high start up amps to come down to almost half. I provided estimates to have all concerns addressed at the time of inspection. Unit was cooling upon departure.
Denison, TX 75021
Denison, TX - Performed cooling seasonal safety check. I tested all electrical components on the inside unit along with cleanliness. All electrical components were testing within manufacturer. I found that he blower wheel and evaporator coil could both benefit from having a deep cleaning done. I proceeded outside where I tested all electrical components on the outside unit. All tested within manufacturer specifications. The start amps on the compressor were starting high at over 100 amps. By adding a hard start kit it can help assist those high start up amps to come down to almost half. I provided estimates to have all concerns addressed at the time of inspection. Unit was cooling upon departure.
Denison, TX - Performed cooling seasonal safety check. I tested all electrical components on the inside unit along with cleanliness. All electrical components were testing within manufacturer. I found that he blower wheel and evaporator coil could both benefit from having a deep cleaning done. I proceeded outside where I tested all electrical components on the outside unit. All tested within manufacturer specifications. The start amps on the compressor were starting high at over 100 amps. By adding a hard start kit it can help assist those high start up amps to come down to almost half. I provided estimates to have all concerns addressed at the time of inspection. Unit was cooling upon departure.
Matthew C.
Matthew C.
Preformed duct cleaning estimate. I thoroughly evaluated the ducts and system itself. The homeowner did mention that she hasn’t had the ducts cleaned or anything for atleast 30 years of living in the home. The unit is from 2012 rheem electric system, i found that the blower wheel and housing had some growth along with dust/debris build up. Presented all picture documentation of my findings to the homeowner. I presented options for the homeowner to go over.
Denison, TX 75021
Denison, TX - Preformed duct cleaning estimate. I thoroughly evaluated the ducts and system itself. The homeowner did mention that she hasn’t had the ducts cleaned or anything for atleast 30 years of living in the home. The unit is from 2012 rheem electric system, i found that the blower wheel and housing had some growth along with dust/debris build up. Presented all picture documentation of my findings to the homeowner. I presented options for the homeowner to go over.
Denison, TX - Preformed duct cleaning estimate. I thoroughly evaluated the ducts and system itself. The homeowner did mention that she hasn’t had the ducts cleaned or anything for atleast 30 years of living in the home. The unit is from 2012 rheem electric system, i found that the blower wheel and housing had some growth along with dust/debris build up. Presented all picture documentation of my findings to the homeowner. I presented options for the homeowner to go over.
Matthew C.
Matthew C.
Preformed single system cooling maintenance on a 2021 inside and 2023 outside heat pump. I tested all electrical components on the inside unit. All tested within manufacturer specifications. I did change the filter out for the client today. 20x20x1. Treated drain line with total c. Checked for cleanliness of the mechanical parts. The blower wheel and evaporator coil could benefit from a deep cleaning. I proceeded outside to test all the electrical components on the outside unit. All tested within manufacturer specifications, however the capacitor was testing on the lower ends of the manufacture specifications range at 38.12/40 mfd. The start amps of the compressor were starting higher than 100 amps the manufacturer rating is 110 max amps on start . The unit also doesn’t have any type of surge protection on it. The unit could benefit from having a hard start kit and surge protector installed. The hard start kit will help bring down the high start amps and will help prolong the life of t
Denison, TX 75021
Denison, TX - Preformed single system cooling maintenance on a 2021 inside and 2023 outside heat pump. I tested all electrical components on the inside unit. All tested within manufacturer specifications. I did change the filter out for the client today. 20x20x1. Treated drain line with total c. Checked for cleanliness of the mechanical parts. The blower wheel and evaporator coil could benefit from a deep cleaning. I proceeded outside to test all the electrical components on the outside unit. All tested within manufacturer specifications, however the capacitor was testing on the lower ends of the manufacture specifications range at 38.12/40 mfd. The start amps of the compressor were starting higher than 100 amps the manufacturer rating is 110 max amps on start . The unit also doesn’t have any type of surge protection on it. The unit could benefit from having a hard start kit and surge protector installed. The hard start kit will help bring down the high start amps and will help prolong the life of t
Denison, TX - Preformed single system cooling maintenance on a 2021 inside and 2023 outside heat pump. I tested all electrical components on the inside unit. All tested within manufacturer specifications. I did change the filter out for the client today. 20x20x1. Treated drain line with total c. Checked for cleanliness of the mechanical parts. The blower wheel and evaporator coil could benefit from a deep cleaning. I proceeded outside to test all the electrical components on the outside unit. All tested within manufacturer specifications, however the capacitor was testing on the lower ends of the manufacture specifications range at 38.12/40 mfd. The start amps of the compressor were starting higher than 100 amps the manufacturer rating is 110 max amps on start . The unit also doesn’t have any type of surge protection on it. The unit could benefit from having a hard start kit and surge protector installed. The hard start kit will help bring down the high start amps and will help prolong the life of t
Jesse V.
Jesse V.
Preformed overall inspection of the smell coming from the unit. We found that the best solution for the system and homeowner is to add fresh air to the system along with adding a supply and return to the attic since it is spray foamed. Without this it is causing high humidity problems and rusting a lot of the metal out. We also talked about adding Aprilaire return box to the unit. Also we check the out door condenser fan motor. The grate had broken holding the motor and needs to be addressed. Provided estimates to customer about the solutions. Unit was heat/cooling upon departure.
Denison, TX 75021
Denison, TX - Preformed overall inspection of the smell coming from the unit. We found that the best solution for the system and homeowner is to add fresh air to the system along with adding a supply and return to the attic since it is spray foamed. Without this it is causing high humidity problems and rusting a lot of the metal out. We also talked about adding Aprilaire return box to the unit. Also we check the out door condenser fan motor. The grate had broken holding the motor and needs to be addressed. Provided estimates to customer about the solutions. Unit was heat/cooling upon departure.
Denison, TX - Preformed overall inspection of the smell coming from the unit. We found that the best solution for the system and homeowner is to add fresh air to the system along with adding a supply and return to the attic since it is spray foamed. Without this it is causing high humidity problems and rusting a lot of the metal out. We also talked about adding Aprilaire return box to the unit. Also we check the out door condenser fan motor. The grate had broken holding the motor and needs to be addressed. Provided estimates to customer about the solutions. Unit was heat/cooling upon departure.
Brayden W.
Brayden W.
Arrived on site for maintenance on 2023 Trane furnace. Performed maintenance as scheduled. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested for gas leaks 6. Tested functionality and cleaned flame sensor 7. Tested functionality and cleaned pressure switches and ports 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Tested functionality and visually inspected surface igniter 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14.Drain line tested with gallon of water for clogs and to push anything trying to solidify out Found large amount of dust in return underneath unit. It is inevitable that overtime the dust will get sucked up into the unit. It is important to get this removed because dust is the number one killer of AC systems
Denison, TX 75020
Denison, TX - Arrived on site for maintenance on 2023 Trane furnace. Performed maintenance as scheduled.

 1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested for gas leaks
6. Tested functionality and cleaned flame sensor
7. Tested functionality and cleaned pressure switches and ports
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Tested functionality and visually inspected surface igniter
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14.Drain line tested with gallon of water for clogs and to push anything trying to solidify out

Found large amount of dust in return underneath unit. It is inevitable that overtime the dust will get sucked up into the unit. It is important to get this removed because dust is the number one killer of AC systems
Denison, TX - Arrived on site for maintenance on 2023 Trane furnace. Performed maintenance as scheduled.

 1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested for gas leaks
6. Tested functionality and cleaned flame sensor
7. Tested functionality and cleaned pressure switches and ports
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Tested functionality and visually inspected surface igniter
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14.Drain line tested with gallon of water for clogs and to push anything trying to solidify out

Found large amount of dust in return underneath unit. It is inevitable that overtime the dust will get sucked up into the unit. It is important to get this removed because dust is the number one killer of AC systems
Shelby S.
Shelby S.
Upon arrival, I discovered that a burning contactor causes the transformer to lose 120v out of 240v. I received approval from the customer to replace the contactor under warranty and repair the wiring. After repairing, I tested the system to ensure it was properly heating. System is heating upon departure.
Denison, TX 75021
Denison, TX - Upon arrival, I discovered that a burning contactor causes the transformer to lose 120v out of 240v. I received approval from the customer to replace the contactor under warranty and repair the wiring. After repairing, I tested the system to ensure it was properly heating. System is heating upon departure.
Denison, TX - Upon arrival, I discovered that a burning contactor causes the transformer to lose 120v out of 240v. I received approval from the customer to replace the contactor under warranty and repair the wiring. After repairing, I tested the system to ensure it was properly heating. System is heating upon departure.
Shelby S.
Shelby S.
Upon arrival, I discovered that a burning contactor causes the transformer to lose 120v out of 240v. I received approval from the customer to replace the contactor under warranty and repair the wiring. After repairing, I tested the system to ensure it was properly heating. System is heating upon departure.
Denison, TX 75021
Denison, TX - Upon arrival, I discovered that a burning contactor causes the transformer to lose 120v out of 240v. I received approval from the customer to replace the contactor under warranty and repair the wiring. After repairing, I tested the system to ensure it was properly heating. System is heating upon departure.
Denison, TX - Upon arrival, I discovered that a burning contactor causes the transformer to lose 120v out of 240v. I received approval from the customer to replace the contactor under warranty and repair the wiring. After repairing, I tested the system to ensure it was properly heating. System is heating upon departure.
Shelby S.
Shelby S.
Upon arrival, I found the unit set to emergency heat. I tested the emergency heat and discovered a loss of power to one of the circuits. I went to the main panel and found the breaker off. I turned it on and the electric heat went back to performing at full capacity. I swapped it to heat pump heating and verified that it worked. With the amount of water dripping on the outdoor unit, I did not open the panel to prevent water damage to the components. System is heating in both electric and heat pump heating upon departure.
Denison, TX 75021
Denison, TX - Upon arrival, I found the unit set to emergency heat. I tested the emergency heat and discovered a loss of power to one of the circuits. I went to the main panel and found the breaker off. I turned it on and the electric heat went back to performing at full capacity. I swapped it to heat pump heating and verified that it worked. With the amount of water dripping on the outdoor unit, I did not open the panel to prevent water damage to the components. System is heating in both electric and heat pump heating upon departure.
Denison, TX - Upon arrival, I found the unit set to emergency heat. I tested the emergency heat and discovered a loss of power to one of the circuits. I went to the main panel and found the breaker off. I turned it on and the electric heat went back to performing at full capacity. I swapped it to heat pump heating and verified that it worked. With the amount of water dripping on the outdoor unit, I did not open the panel to prevent water damage to the components. System is heating in both electric and heat pump heating upon departure.
Matthew C.
Matthew C.
I performed a single heating maintenance on a 2020 airhandler and 2019 410A heat pump system. I checked amps, capacitors, filters, electrical, drains, and safeties. I noticed that the airhandler has bit of build up present on blower motor. I rinsed it the best I could with water. I found that the capacitor has not been changed reading 42/45 on the compressor side. The customer is aware of the capacitor and wants to change it himself. I provided pricing to address the build up on the blower wheel. Unit was heating upon departure.
Denison, TX 75021
Denison, TX - I performed a single heating maintenance on a 2020 airhandler and 2019 410A heat pump system. I checked amps, capacitors, filters, electrical, drains, and safeties. I noticed that the airhandler has bit of build up present on blower motor. I rinsed it the best I could with water. I found that the capacitor has not been changed reading 42/45 on the compressor side. The customer is aware of the capacitor and wants to change it himself. I provided pricing to address the build up on the blower wheel. Unit was heating upon departure.
Denison, TX - I performed a single heating maintenance on a 2020 airhandler and 2019 410A heat pump system. I checked amps, capacitors, filters, electrical, drains, and safeties. I noticed that the airhandler has bit of build up present on blower motor. I rinsed it the best I could with water. I found that the capacitor has not been changed reading 42/45 on the compressor side. The customer is aware of the capacitor and wants to change it himself. I provided pricing to address the build up on the blower wheel. Unit was heating upon departure.
Brayden W.
Brayden W.
Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested for gas leaks 6. Tested functionality and cleaned flame sensor 7. Tested functionality and cleaned pressure switches and ports 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Tested functionality and visually inspected surface igniter 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14.Drain line tested with gallon of water for clogs and to push anything trying to solidify out Found large amount of dust/debris on outdoor condenser coil. Advised homeowner this will reduce efficiency and put stress on the equipment. Discussed condenser cleaning process of removing the top for better access to chemically treat and rinse coils from the inside out. Also noticed blower wheel was starting
Denison, TX 75020
Denison, TX - Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested for gas leaks
6. Tested functionality and cleaned flame sensor
7. Tested functionality and cleaned pressure switches and ports
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Tested functionality and visually inspected surface igniter
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14.Drain line tested with gallon of water for clogs and to push anything trying to solidify out

Found large amount of dust/debris on outdoor condenser coil. Advised homeowner this will reduce efficiency and put stress on the equipment. Discussed condenser cleaning process of removing the top for better access to chemically treat and rinse coils from the inside out. Also noticed blower wheel was starting
Denison, TX - Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested for gas leaks
6. Tested functionality and cleaned flame sensor
7. Tested functionality and cleaned pressure switches and ports
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Tested functionality and visually inspected surface igniter
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14.Drain line tested with gallon of water for clogs and to push anything trying to solidify out

Found large amount of dust/debris on outdoor condenser coil. Advised homeowner this will reduce efficiency and put stress on the equipment. Discussed condenser cleaning process of removing the top for better access to chemically treat and rinse coils from the inside out. Also noticed blower wheel was starting

Your High Efficiency

Experts