Denison is one of Grayson County’s most established cities, with a historic downtown that just won the Greatest American Main Street Award in 2025 and neighborhoods that have been around for decades. The homes here are not new construction. They’re established properties with HVAC systems that have real history behind them, and they need a company that knows how to work on all of it. Adon Complete Air Conditioning and Heating has been providing heating and air conditioning service in Denison, TX, for years, and we run calls here regularly. We’re based in Anna, just down Highway 75, and we’re available 24 hours a day, 7 days a week.
The Reality of HVAC in Denison
Denison homes tend to be older, and the HVAC systems reflect that. Our technicians have found evaporator coils in Denison that have never been cleaned, condensers blocked so severely with debris that they could only cool the air by 6 degrees, blower motors that have failed from years of restricted airflow, and R-22 refrigerant systems that are beyond repair and need replacement. We have also found plenty of systems in great shape that just need regular maintenance to stay that way.
The point is this: if you have not had your system serviced in a while, Denison is a place where that matters. A system running at 6 degrees of cooling when it should be running at 18 to 20 is working twice as hard for half the result. Getting a set of professional eyes on it costs a fraction of what an emergency repair costs in August.
HVAC Services We Provide in Denison
AC Repair. We carry common parts on our trucks and handle all makes and models. We resolve most Denison repair calls in a single visit.
AC and Heating Installation. When a system is beyond repair or simply not worth fixing, we provide an honest assessment and a clear replacement price. Every new installation comes with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and covers two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. A maintenance visit helps us catch failing capacitors, clogged drain lines, and dirty coils before they become emergency calls.
Air Duct Cleaning. Older Denison homes often have ductwork that has accumulated years of debris. Our technicians have recommended full system cleanings on multiple Denison service calls this year. A thorough duct cleaning makes a real difference in both air quality and system efficiency.
Air Duct Repair and Sealing. Rodent damage, disconnected ductwork, and aging flex duct are common in Denison homes. Leaky ducts can account for 20 to 30 percent of your system’s output loss. We find and fix them.
Indoor Air Quality. Years of accumulated dust and biological growth on evaporator coils and in ductwork are a real issue in established homes. We offer air filtration systems, UV purifiers, and a free “What Are You Breathing?” screening for Denison homeowners.
Mini-Split Installation. For Denison homes with additions, sunrooms, or spaces where extending ductwork is not practical, mini-splits provide clean, independent cooling and heating without touching the central system.
Heat Pump Installation and Repair. We install and service heat pump systems throughout Denison and Grayson County. A heat pump handles both heating and cooling from a single unit and can be a good option when replacing aging single-purpose equipment.
Adon Complete in Denison
Owner Jesse Villarreal has over 27 years of HVAC experience. We are a Trane Comfort Specialist and Mitsubishi-authorized dealer, which means factory-trained technicians and the full manufacturer warranty on every system we install. We service all brands. We work in Denison regularly and know what the homes here need. Our technicians explain what they find before doing any work, and we don’t push repairs or replacements that aren’t warranted.
One of our Denison customers left a detailed review after our technician, Alex, repaired ductwork in her attic, explained every step of the process, and even helped her address a rodent issue that caused the duct damage. That is the standard we hold ourselves to on every call.
Serving Denison and Grayson County
We serve all of Denison, including Thompson Heights, the downtown historic district, and the neighborhoods along Highway 75. We also serve surrounding Grayson County communities, including Sherman, Van Alstyne, Pottsboro, Gordonville, and Whitesboro.
Questions Denison Homeowners Ask Us
My AC is running, but the house isn’t cooling down. What’s going on?
This is one of the most common calls we get in Denison. The system is running, but airflow is so restricted by dirty coils, a clogged filter, or blocked ductwork that it cannot transfer heat effectively. We have found systems in Denison cooling only 6 degrees when they should be cooling 18 to 20. A diagnostic visit will tell you exactly what is happening. Call (903) 482-4900 to schedule.
I have an older R-22 system. What are my options?
R-22 refrigerant is no longer being manufactured. If your system has a significant refrigerant leak, the practical answer in most cases is to replace it. We will tell you honestly when a repair makes sense and when it does not. If replacement is the right call, we will walk you through your options and give you a clear price before any work is done.
How do I know if my ductwork needs cleaning or repair?
Signs include uneven cooling between rooms, visible dust near supply vents, musty odors when the system runs, or a system that is working harder than it should. Our technicians have found disconnected ducts, rodent damage, and years of debris buildup in Denison homes during routine service calls. A professional duct cleaning and inspection is the only reliable way to know what is in there.
Do you offer HVAC maintenance plans in Denison?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. For Denison homeowners with older systems, staying on a maintenance schedule is one of the best ways to catch small problems before they become expensive ones.
Do you offer emergency HVAC service in Denison?
Yes. We are available 24 hours a day, 7 days a week throughout Denison and Grayson County. When you call after hours, you reach a real person. Call (903) 482-4900 any time.
Schedule Heating and Air Conditioning Service in Denison
If your system hasn’t been serviced recently or you have noticed a change in performance, call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online. We know Denison, and we are ready to help.
Recent Jobs and Reviews in Denison, TX
Denison, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Denison, TX between December 2025 and January 2026.
The most recent job was on January 19, 2026.
Adon Complete Air Conditioning and Heating has completed 85 jobs in Denison, TX in the last 12 months. The first job there was in March 2020.
Job Locations
With the returning of the smell, we will need to clean the evaporator coil again. Customer wants to move towards a permanent solution, but still does not want the Airscrubber. I presented a partial solution. This includes cleaning and a u/v stick. Collected service fee and will give it back once repair is selected.
Upon arrival, I checked main power supply at the disconnect. I discovered that there was not any power being supplied. Customer stated it was performing great, but it was turned off for the solar guys to work. The unit has not operated since then. I traced power back to the main breaker box. I located an unlabeled 50amp breaker in the off position. I turned it on and the mini split regained power. I tested the mini split in heating mode and yielded a fantastic temperature split. Customer had to leave to go back to work. I collected my dispatch and got signatures.
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested capacitor and contactor (outdoor electrical) 15. Rinsed condenser unit to promote heat exchange 16. Tested emergency heat and found no issues All is well with regards to heating cycle. However, I did find that the contactor was testing very low on the condenser. This will likely need to be changed out under parts and labor warranty very soon, however, it is still testing within range, and I am unable to process a warranty
Added one pound of refrigerant to 3 head mini split. Supply temps living room 47 bedrooms 51.
Performed a 2 system spring maintenance ( heat pump). Tasks performed. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked refrigerant pressures. 7. Checked compressor amp draw….main house unit failed at over 100 amps. Manufacturer rating is at 77 amps. 8. Checked condenser fan motor amp draw. 9. Inspected / replaced return filter. 10. Inspected return plenum for debris 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel. 14. Measured temperature degrees split differentia. 15. Inspected drain lines. 16. Washed condenser unit. 17. Tested contactor. On main house unit and was testing at 19ohms
Arrived on site for heating maintenance on Gree three head mini split from 2019. Homeowner stated system was not keeping up in living room area. The other two heads were in bedrooms. I washed the filters for all three heads as well as the condensing unit outside. Upon taking a temp split, I was only getting a 10° split in heating and cooling lead me to believe there’s a problem with the refrigerant levels. I did not have the mini split adapter on hand and was unable to take refrigerant pressures at this time. I then conducted a leak test on the copper lines, condensing unit, and all three heads. It was at this point I detected a leak at the living room evaporator video included. I then check the warranty status and found that it was no longer under warranty. I then discussed with the homeowner possible options for addressing the issue. I informed the homeowner that our options are very limited since it is not under warranty and 410 a equipment has been phased out and I can no longer pu
Preformed single system heating maintenance on a 2019 gas furnace. I tested all electrical components and safeties. All tested within manufacturer specifications. I checked the inside unit for cleanliness. I did find that the blower wheel was dirty. With it being dirt it can cause drag and motor failure. I was getting a supply temperature at 112 degrees with the return at 68 degrees. I changed filter for client 16x25x1. I proceeded outside to visually inspect the outdoor unit. I did notice that the condenser coils were dirt with dirt/debris, this cause can cause issues with the unit not being able to have the proper airflow and not cool the house properly, also can lead to the coils to possibly leak. I also the unit did not have any type of dedicated surge protection. By adding surge protection to the hvac unit I can help in the events of a lightning storm, black/brown out or any type of surge in power that can cause harm to the units electrical components or unit failure. Unit was hea
I performed a single system heating maintenance The heating source is a heat pump with back up electric heat. The outdoor is from 2002 and the airhandler is from 2013. I checked amps, electrical, cleanliness, and safeties. The system has a 15kw heat kit and only using 10kw of it. I observed that the suction line does not have any insulation on it. This reduces efficiency and causes it to cost more to run. The evaporator coil is dirty on the bottom side . This will reduce the efficiency and cause operation issues. The blower wheel has growth clusters causing air equality reduction and added stress to the system. I offered surge protection, and the customer has someone that is going to install some for the HVAC system. I spoke about the liability of doing a thorough cleaning on the evaporator coil. Customer would like to wait to see how it performs when cooling season comes back around.
3 year warranty / 10,000.00 coverage if part fails to protect connected equipment. I installed the surge protector on the outdoor unit and ensured it was functional. I washed the evaporator coil thoroughly with chemicals, allowed time to soak, and rinsed it with water. We provided this cleaning to address dirty Sox syndrome and customer is aware that it will likely return, with no estimated time frame, without preventive u/v devices.
I performed a single system heating check on a 2009 Goodman gas system. I checked amps, electrical, capacitors, safeties, and cleanliness. I noticed that the inducer motor is making an odd vibrating noise. I tightened the screws and the noise remained. It seems the bearings are worn causing this vibration to occur. Bearing failure will result in the motor failing completely over time. I observed that the blower wheel has a noticeable amount of dust build up on it. This will cause the bearings to become worn at an accelerated rate resulting in the blower motor seizing up. I gave solutions to these observed issues during the time of service.

