Menu

Heating and Air Conditioning Services in McKinney, TX

McKinney summers are long, and the heat is serious. When your AC stops working in July, you need someone who can actually show up the same day, not schedule you out a week. Adon Complete Air Conditioning and Heating has been serving McKinney homeowners for years from our home base in Anna, just up the road. Our owner, Jesse Villarreal, has over 27 years of HVAC experience, and our technicians, Shelby, Brayden, Matthew, and the rest of the team, are working in McKinney neighborhoods every single day. We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week for emergencies.

Schedule ServiceCall (903) 482-4900

HVAC Services We Offer in McKinney

We handle everything heating and cooling for McKinney homeowners and businesses. Here’s what we do:

Why McKinney Homeowners Choose Adon Complete

There’s no shortage of HVAC companies serving McKinney. Here’s what makes us different.

We’re local. We’re based in Anna, TX, a few miles up Highway 75. Our technicians drive the roads of McKinney every day and know the neighborhoods, the housing stock, and the HVAC challenges that come with North Texas homes.

Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in the business. When you call Adon Complete, you’re not calling a franchise or a call center. You’re calling a local company where the owner’s name and reputation are on the line with every job.

We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. That means factory-trained installation and the full manufacturer warranty on every system we install. Not every HVAC company in McKinney can say that.

We service everything. Whatever brand you have, we can work on it. We don’t turn jobs away because the equipment isn’t ours.

The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. It’s the most affordable maintenance plan in the area.

Serving All of McKinney

We service every neighborhood in McKinney, including Craig Ranch, Stonebridge Ranch, Adriatica, Tucker Hill, and Historic Downtown McKinney. Whether you’re in a newer construction home or an older property, we know the area well, and our technicians are out in McKinney neighborhoods every day.

Schedule Service in McKinneyCall (903) 482-4900

Frequently Asked Questions

How much does AC repair cost in McKinney, TX?

Most AC repairs in McKinney run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement or a thermostat issue are on the lower end. More involved repairs, such as a refrigerant recharge or a blower motor replacement, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in McKinney?

Yes. We offer 24/7 emergency heating and air conditioning service throughout McKinney and Collin County. When you call after hours, you reach a real person who can get a technician to your home fast. We know that a broken AC in McKinney during summer doesn’t wait for business hours.

What HVAC brands do you service in McKinney?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands specifically, but we won’t turn down a job because of the brand on the equipment.

Do you offer HVAC maintenance plans in McKinney?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. It’s the most affordable way to keep your system running reliably year-round.

What areas of McKinney do you serve?

We serve all of McKinney and the surrounding Collin County communities, including Allen, Frisco, Melissa, Anna, Celina, and Prosper.

Schedule HVAC Service in McKinney Today

Whether you need same-day AC repair, a new system installed, or just want to get on a maintenance plan before summer hits, we’re ready to help. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in McKinneyCall (903) 482-4900

Recent Jobs and Reviews in McKinney, TX

Rated 4.9 out of 5 stars based on 19 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

McKinney, TX at a glance

Adon Complete Air Conditioning and Heating has completed 25 jobs in McKinney, TX between November 2023 and December 2024.

The most recent job was on December 6, 2024.

Adon Complete Air Conditioning and Heating has completed 159 jobs in McKinney, TX in the last 12 months. The first job there was in March 2020.

Job Locations and Reviews

Jesse V.
Jesse V. Checked in
Thermostat replacement Trane 824 Trane 824 Thermostat Installation 1. Power down system. 2. Disconnect wiring from old thermostat. 3. Remove thermostat from wall. 4. Mount new thermostat on wall. 5. Wire thermostat to proper functionality. 6. Power system back on. 7. Programmed the thermostat for system. 8. Test cooling and heating to verify all functionalities are working correctly. 9. Help customer to connect to Wi-Fi on the thermostat and the app on their phone. 10. Adon Complete Air thermostat registration. Thermostat Warren 10 year manufacturer warranty
McKinney, TX 75071
kelsie.adon@gmail.com
kelsie.adon@gmail.com Checked in
The current old system is a gas propane system. Will be converting the HVAC system over to a heat pump system Electrician will be involved to run the OK to the inside unit number six wire roughly 60+ feet of wire and breaker to get to the inside attic part. The current gas line in the attic will be shut off. Customers responsible to eliminate the gas tank. AIR RETURN Will add return 12” Boot and Filter grill. ________________________________________________________________________ Lennox EL18 Air Conditioner: Heat Pump (NEW) 2024 SEER2 Lennox: Outside unit: EL18XPV-036 Lennox: Air Handler: CBK45UHVT-036 Heat Kit LENNOX Thermostat Capacity 3 Ton ADON CARE CLUB MAINTENANCE PLAN 1 Year Maintenance (Spring / Fall safety checks) Protects your manufacturer warranty Prolongs the life of your cooling and heating system LENNOX Manufacture Extended Warranty 10 - Year Compressor Warranty 10 - Year Parts Warranty ​**** Labor Warranty **** 10 Year Labor Warranty JB Warranty & Ass
McKinney, TX 75071
Jesse V.
Jesse V. Checked in
10 Year Labor Warranty Thru JB Warranty - 10 year warranty starts from manufacture warranty - labor warranty cannot be used until 90 days after the purchase of the labor warranty
McKinney, TX 75071
Alex G.
Alex G. Checked in
Preformed maintenance on train 2022 communicating multi stage heat pump everything running as it should including indoor air handler and outdoor condenser Check all Capacitors readings, indoor fan motor fan motor compressor as well as electric heat strips . Customer did renew yearly maintenance for one more year
McKinney, TX 75071
Alex G.
Alex G. Checked in
Unit is a 1993 single stage Goodman furnace when applied power furnace throws a twinning code. Which generally is reverse polarity somewhere on the system. I checked the transformer as well as main power voltage. Everything is good. The only thing else it could be is your main circuit board unfortunately I do not have one on the truck to replace it. Spoke with the owner and they are wanting to know a price for replacing the the circuit board.
McKinney, TX 75071
Alex G.
Alex G. Checked in
Performed fall maintenance on your old System return medium filter dirty 20 x 25 x 4“ head replacement on truck marked filter for today’s date replaced filter. All safety switches are active and working as they should recommended a duck cleaning as there is a little bit of debris build up in the return Plenum, return ducts, As well as fan motor. Unit is back together and running as it should
McKinney, TX 75071
Shelby S.
Shelby S. Checked in
Performed 4 system heating maintenances. Checked amps, filters, electrical, safeties, drains, and cleanliness. Systems are performing to manufacture specifications. Suggestions and concerns Main house systems 1. Systems have inferior filtration and allowing dust to bypass the filters. Recommend installing Aprilaire filter racks. 20x25x4 and 16x25x4. 2. I recommend adding primary float switches to both systems. These are designed to detect condensation clogs before water damage occurs. 3. I recommend adding insulation to both system on the p traps. Without having the insulation, it causes the p trap to sweat and potentially cause water damage. Guest units 1. Both systems are in dire need of duct cleaning. Systems have excessive dust in the duct work. This causes poor air quality, more frequent filter changes, and it causes the rest of the system to become dirty ultimately reducing efficiency. 2. Both systems needs the blowers pulled and cleaned. Dirty blower wheels cause reduc
McKinney, TX 75069
Shelby S.
Shelby S. Checked in
Performed single system heating maintenance. Checked amps, capacitor, filter, electrical, cleanliness, and safeties. System is performing mostly within manufacture specifications. Suggestions and concerns 1. System has growth forming inside of the airhandler. Recommend adding any/v stick to sterilize the surfaces to prevent growth. 2. During compressor start up it is rated to pull 79 amps. System is currently pulling 96.6 amps. This causes excessive wear, reduced efficiency, and ultimately the compressor locking up. Recommend adding a hard start kit to reduce the power pull to the compressor and prolonging the life of the compressor as much as possible.
McKinney, TX 75070
Shelby S.
Shelby S. Checked in
Installed 2 Apco-x. Registered both of them and provided pricing to do heating checks, balance air flow, fog the systems, and requested pricing to attempt to deal with dirty Sox on one of the systems.
McKinney, TX 75072
Shelby S.
Shelby S. Checked in
Recommended customer deal with mice problem and then we reassess smell issue. Found 2 reme halos burnt out. We need to locate 2 Apco-xs to replace them.
McKinney, TX 75072
Shelby S.
Shelby S. Checked in
Found blower motor receiving voltage to operate properly but was not turning on. We reset the the unit and unplugged the blower completely. After reset, blower began to work. We suspect that the module is having an issue and recommended replacement. System has an oversized return plenum and lacking in return air. Customer was concerned about the supply grill in the kitchen due to it blowing her flame when she cooks. Provided pricing to deal with known issues.
McKinney, TX 75071
Jerad L.
Jerad L. Checked in
Came out today for 4 system maintenance on gas horizontal systems. All 4 units are in attic, started by turning on heat to verify proper sequence of operation. All 4 systems burners are firing properly, all safety switches are operating as designed. Motors are all within manufacture specifications. Units are dirty as well as dirt build up in ducts recommend duct cleaning on all 4 systems. Also none of the systems have sediment traps on gas lines which should be on systems. Recommend adding to keep gas clean and to protect systems. Changed all 4 (20x25x4) filters. All 4 systems are operating as designed. Thank you for your time in this matter. VIP Annual Service Agreement Renewal - 4 Unit Fall & Spring Annual Maintenance Visits 10% Discount on Repairs Discounted $99 Travel Fee (Usually $129) Preferred Customer!
McKinney, TX 75070
Jerad L.
Jerad L. Checked in
Came out for 1 system maintenance. Upon arrival started with inside unit. System is a horizontal zoned heat pump. Checked all electrical components to verify proper heating sequence. No signs of burn marks. All components are operating as designed. Recommend replacing of pan treatment in system. Changed out 310 April air filter that customer provided. Checked all electrical components on outside unit all components are operating as designed. Thank you for your time.
McKinney, TX 75071
Jerad L.
Jerad L. Checked in
Came out for a 1 system maintenance. Upon arrival started by turning heat on at tstat. Then checked all heating elements on gas furnace. All components are operating as designed. There is no float safety switch on system recommend adding to prevent water backing up and causing damage. Ducts have dirt build up recommend duct cleaning in near future, blower wheel also has dirt build up recommend pull and clean of wheel. Thank you for your time.
McKinney, TX 75071
Jerad L.
Jerad L. Checked in
Came out today for 1 system maintenance. System is an upflow zoned gas system. Checked all heating components to verify proper heating sequence. Checked all safeties all components are operating as designed. Blower wheel is dirty recommend cleaning to increase efficiency and longevity of system. Flame sensor also dirty recommend pull and clean. Thank you for your time.
McKinney, TX 75072
Jerad L.
Jerad L. Checked in
Came out for a duct cleaning estimate. Upon arrival went into attic where all 3 units are. Checked all ductwork ducts are flex with metal plenums All 3 ducts systems need to be cleaned. Let homeowner know about insulation and drain pans as possible concerns. Customer stated they would reach out if interested in recommendations. Thank you for your time and allowing me into your home.
McKinney, TX 75069
Jerad L.
Jerad L. Checked in
Came out today for 1 system maintenance. Our install 5 months old, gas system. Location in attic. Checked all heating components to verify proper heating sequence. All heating elements and safeties are operating as designed. Recommend duct cleaning and adding supply duct to help with improving air quality. All components are operating as designed. Thank you for your time.
McKinney, TX 75071
Shelby S.
Shelby S. Checked in
Performed 2 system heating maintenance on 2014 and 1996 gas furnaces. Checked amps, capacitors, filters, gas valves, inducers, flame sensors, igniters, and safeties. Systems are heating as intended. Suggestions and concerns 1. Downstairs - blower motor has build up on the wheel. This reduces efficiency and put extra wear on the motor itself. The added stress will reduce the life expectancy of the motor. Also, it is suggested to add a water safety device to help detect a clog before water damage occurs. 2. Upstairs - 1996 - system is showing signs of the blower bearings being worn out. With the specific furnace design, there is a flue pipe that goes right in front of the blower. If we were to remove this flue pipe, it would cause a breach that would become unrepairable due to a seal that isn’t available anymore. The inducer motor is also showing signs of the bearings being worn out and it will ultimately fail. Blower capacitor is reading 3/10 and I can no longer guarantee it will c
McKinney, TX 75072
Shelby S.
Shelby S. Checked in
Performed 2 system heating maintenance. Checked amps, capacitors, drains, electrical, flame sensors, igniters, cleanliness, and safeties. Systems are heating to manufacture specifications with some suggestions and concerns. Suggestions and concerns 1. Main unit in garage - burners are building up a lot of rust and will cause an improper flame once it gets bad enough. Suggest replacement of the burners 2. Main unit - transformer inside of the furnace is running extremely hot and this could result in it failing. Suggest replacement of the transformer. 3. Main unit- blower is beginning to get dirty again. I suggest upgrading the filter of the system to an Aprilaire to help with dust build up by filtering it better. 4. Master bedroom unit - supply plenum is beginning to rust through. This is concerning because once it does the system will start heating and cooling to the attic causing a humidity problem and reduce efficiency. 5. Master bedroom unit - burners are also covered in rus
McKinney, TX 75071
Shelby S.
Shelby S. Checked in
Reset humidifier and cycled through the test mode and unit is operating as intended. If humidity will not hold where h/o wants it, Mitch said we would come back with service fee charge.
McKinney, TX 75072
Jerad L.
Jerad L. Checked in
Came out to a 1 system maintenance, on a 2021 trane upflow gas system. Upon arrival started by turning fan on tstat from on to auto so fan doesn’t continue to run. Checked all heating components to verify proper heating sequence. All heating components are operating as designed. All safeties are operating as designed. Customer just changed 20x25x1 filter. Recommend adding pan treatment into system to help keep drain lines from backing up. Looked over outside unit to verify all components to be operating within manufacture specifications. Outside unit is caked with dirt recommend chemical cleaning.
McKinney, TX 75069
Jerad L.
Jerad L. Checked in
3 systems tied together need to add isolation valves to clear lines properly and will clear lines at no cost if isolation valves are put on with motor. Motor is in stock, in order to be able to order we will need 50% down. With provided quote, we have price matched. Changed out motor and adding blow out valves and cleared drain line. There is a lot of build up in drain lines without treatment of lines can’t say how long lines will remain clear. System is operating at this time and systems are draining at this time.
McKinney, TX 75070
Sam M.
Sam M. Checked in
  Fall PM- Checked: blower motor and wheel, electrical wiring and connections, limit switches and safety controls, airflow, filters, temperature rise, thermostat, amp draws, capacitor, gas line and connections, (no gas leaks), gas flow, burners, orifices, ignitor, heat exchangers, and flame quality. The flame sensor was cleaned.     
McKinney, TX 75071
McKinney, TX - Heater runs for a minute or two and then short cycles. Double checked.
AC T.
AC T. Checked in
Heater runs for a minute or two and then short cycles. Double checked.
McKinney, TX 75072
McKinney, TX -  -Upstairs system blower motor replacement under Carrier, part in stock
- Downstairs system furnace control board, part ETA 3 to 5 business days
- Adon Care Club Membership
AC T.
AC T. Checked in
-Upstairs system blower motor replacement under Carrier, part in stock - Downstairs system furnace control board, part ETA 3 to 5 business days - Adon Care Club Membership
McKinney, TX 75072

Your High Efficiency

Experts