Adon Complete Air Conditioning and Heating has provided HVAC services in Plano, TX, for years, serving Collin County from our home base in Anna, just up Highway 75. Whether your AC quits on a July afternoon, your furnace needs attention before the first cold front, or you are ready to upgrade to a more efficient system, our technicians regularly work in Plano neighborhoods and know the homes here well.
Plano is one of the largest cities we serve, and its homes reflect that. We work on older single-stage systems in established East Plano neighborhoods and modern variable-speed equipment in newer Legacy corridor builds. Many larger homes in Plano run two separate HVAC systems, and we are experienced diagnosing and servicing both in the same visit. We service all makes and models; we are a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we are available 24 hours a day, 7 days a week for emergencies.
HVAC Services We Offer in Plano, TX
AC Repair: Same-day AC repair available throughout Plano and Collin County. We diagnose and repair all makes and models, and most calls are resolved in a single visit. When your air conditioning goes out in the Plano heat, we treat it like the emergency it is.
AC Installation and Replacement: When your Plano home needs a new system, we size it correctly using a load calculation and install it to manufacturer specs. All new installations come with up to a 10-year labor warranty. We’ll help you choose the right capacity and efficiency rating for your home, not just the unit that fits the budget.
Heating Repair and Installation: We service gas furnaces, heat pumps, and electric systems throughout Plano. Winters here are mild but the occasional hard freeze is real, and a furnace that won’t fire in January isn’t something you want to wait on. We stock parts for the most common brands and most repairs are done in one visit.
HVAC Maintenance: Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Plano homeowners running two systems, it’s the most practical way to keep both units maintained without scheduling separate visits.
Ductless Mini-Split Systems: Plano’s sunrooms, home offices, garage conversions, and older additions without ductwork are ideal for ductless mini-splits. We install single and multi-zone systems throughout Plano, and they’re significantly more efficient than window units or electric baseboard heat.
Heat Pumps: Heat pumps handle both heating and cooling from a single system and are a practical choice for Plano homeowners who want year-round efficiency. In a climate where extreme cold is rare but energy costs matter, a modern heat pump often outperforms a traditional gas furnace and AC combo on annual operating costs.
Indoor Air Quality: Newer construction in Plano is built tight for energy efficiency, which traps allergens, dust, and humidity inside. We offer air filtration systems, UV air purifiers, ventilators, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Plano area homeowners.
Duct Cleaning and Duct Repair: Leaky or dirty ductwork is one of the most common causes of uneven temperatures and high energy bills in Plano homes, especially two-story and multi-system properties. We inspect, clean, and seal ductwork throughout Plano and Collin County, and fixing the ducts often makes a bigger difference than replacing the equipment.
Why Plano Homeowners Choose Adon Complete for HVAC Service
- We are close by. Based in Anna, TX, our technicians regularly work in Plano and typically reach most addresses in 30 to 40 minutes via Highway 75.
- Owner Jesse Villarreal has over 27 years of HVAC experience. When you call Adon Complete, you are calling a local company where the owner is actively involved and his reputation is on the line with every job.
- We are a Trane Comfort Specialist and Mitsubishi-authorized dealer, which means factory-trained installation and the full manufacturer warranty on every system we install.
- We are experienced with two-system homes. Many larger Plano properties run separate upstairs and downstairs units, and we service both in the same appointment.
- The Adon Care Club is $12 a month. Two tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access year-round.
Neighborhoods We Serve in Plano, TX
We provide HVAC services throughout Plano, including Legacy West, Windhaven Meadows, Willow Bend, Haggard Park, Ridgeview Ranch, Chase Oaks, and the communities along the Dallas North Tollway corridor. We also serve Plano’s neighboring cities, including Allen, McKinney, Frisco, and Anna. If you’re not sure whether we cover your area, call us, and we’ll let you know.
Plano, TX HVAC FAQ
How much does AC repair cost in Plano, TX?
Most AC repairs in Plano run between $150 and $600, depending on the repair type. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs, like a blower motor or evaporator coil, cost more. We give you a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Plano?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Plano and Collin County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC during a Plano summer can’t wait until morning.
My Plano home has two HVAC systems. Can you service both on the same visit?
Yes, and we do it regularly. Many larger Plano homes, particularly those along the DNT corridor and in the Legacy area, run separate systems for the upstairs and downstairs zones. Our technicians can diagnose and service both units in the same appointment, saving time and giving us a complete picture of how the home is performing.
My newer Plano home feels stuffy even though the AC is working fine. What is going on?
Tight construction is usually the culprit. Homes built in Plano’s newer developments are sealed for energy efficiency, which reduces natural air exchange and traps moisture, allergens, and CO2 inside. A whole-home ventilator or ERV brings in fresh outdoor air while recovering the energy you have already spent conditioning the air inside. It is the right fix for stuffy newer construction, and we install them throughout Plano.
What HVAC brands do you service in Plano?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands, but we do not turn down a job because of what brand is on the equipment.
Schedule HVAC Service in Plano, TX Today
Whether you need same-day AC repair, a new system installed, or want to get on a maintenance plan before the heat hits, Adon Complete Air Conditioning and Heating is ready to help. Call us at (903) 482-4900 or click below to schedule. We also serve the surrounding Collin County communities of Allen, McKinney, Wylie, and Anna.
Recent Jobs and Reviews in Plano, TX
Plano, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Plano, TX between April 2025 and May 2025.
The most recent job was on May 16, 2025.
Adon Complete Air Conditioning and Heating has completed 81 jobs in Plano, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Arrived to unit downstairs, not cooling properly. Client stated it would can continuously run and not meet thermostat set point. I proceeded outside and verified. The outdoor unit was on and running. I connected my gauges and found the unit to be very low on Freon. I explained our options to our client and confirm that the equipment was still under parts warranty until 2027. Our client had previously purchased a labor warranty in 2023, which does cover the labor for the evaporator coil replacement. Trane has the part ordered and will be delivered Wednesday. Our client also elected to add a hard start kit to the compressor to help keep it healthy and operating within manufacture specifications. I did install the heart kit today. Our client did decline maintenance at this time also. $200 deposit collected. Coil eta is 5/21/2025. Will schedule repair after coil arrives.
Performed 2 system cooling maintenance. I checked amps, capacitor, drains, electrical, refrigerant temperature, temperature differential, cleanliness, and rinsed the outdoor units. The systems are performing well with 2 things that need to be addressed. The downstairs unit’s blower wheel has some build up present. This causes the motor to work overtime and can cause premature failures. The downstairs capacitor associated with starting the compressor is reading extremely weak. I performed the check during operation. It read 24/40. This is dangerously low and will likely fail this summer. 40 + 5 MFD DUAL CAPACITOR SIMILAR TO A BATTERY, CAPACITORS HELP START MOTORS BY STORING CURRENT. A DAMAGED CAPACITOR CAN DAMAGE THE MOTOR IF NOT SERVICED. REGULAR MAINTENANCE IS ENCOURAGED.
Homeowner stated that the unit wasn’t cooling. Found the unit tripped on overflow switch,,,, blowing out the line was not needed at this time,,,line started draining on its own,, we just added the drain line treatment. We also performed the maintenance on the system today. Performed a 1 system spring maintenance ( gas). Tasks performed. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked refrigerant pressures. 7. Checked compressor amp draw. 8. Checked condenser fan motor amp draw. 9. Inspected / replaced return filter,,homeowner will replace it later. 10. Inspected return plenum for debris/ dirty. 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel. 13. Checked blower amp draw. 14. Measured temperature differential . 15. Inspected drain lines. 16. Washed condenser unit.
Homeowner stated that the unit is not cooling,, that it was set to cool but it’s blowing hot air. After setting thermostat to cool we proceeded to inspect the outdoor unit ,, found a bent condenser fan motor blades,, seems that some debris felt inside causing the damage, condenser fan motor was extremely hot to the touch, we recommended to replace both because we don’t know how long the motor would last due to overheating ,, managed to get the unit up and running for now, blades are unbalanced. Blades and motor will be ready to pick up tomorrow 05/16/25 Order # N108024
Installed hard start kit and float switch. Units operating normally upon departure.
Replaced a condenser control board,,, tested, unfortunately we have to come back and finish it.
Upon arrival, we found the outdoor unit not communicating with the rest of the system. We contacted tech support and determined that the outbid control board is not producing its own voltage. We will need to order an outdoor control board under parts and labor warranty. This is the downstairs unit.
Upon arrival, I found that the blow out valve was shut off. The initial call was due to water dripping out the secondary drain outside. I opened the blow out valve and the water drained. I called in to the office and it was decided for me to perform the cooling maintenance. I checked amps, capacitors, drains, electrical, refrigerant, refrigerant temperature, and cleanliness. I noticed that the upstairs unit has some build up on the bottom side of the evaporator coil and that growth is present in the airhandler. I provided pricing to address these issues. We will need to return to address an issue with the downstairs unit. The system appears to have none condensables present in the system. I performed a series of tests to determine this. I pumped the unit down and allowed it to sit testing if the refrigerant blend was separated. Also, I added 2 pounds of refrigerant to see if it made a difference. The pressures, super heat, and sub cool were constantly jumping around. We will schedule
Performed cooling maintenance on 5 systems. I checked amps, capacitors, filters, electrical, cleanliness, and drains. Systems are performing within manufacture specifications with some recommended repairs. I provided options to be emailed to the customer for pipe insulation, a contactor, cleanings, and electrical repair.
Arrived for a 2 system cooling maintenance Inspection. Our clients voiced concerns about heat rising into the upstairs zone. I first did a visual inspection of the zone board and motors to ensure they did not have any type of damage. I then proceeded outside to wash and rinse both condenser coils. Once cleaned I tested and checked the electrical components and found everything to be working properly. I then went back inside and started testing the zone damper motors to ensure proper function. Both are operating properly. I did also check and test the blower motors for both attic units. For the upstairs zone I did make a slight airflow adjustment by restricting one of the air vents and also by setting the thermostat into auto. That way if and when the temperature set point are passed the unit can operate within the set 2 temp temperatures. Either to heat or cool and keep the space comfortable. If this does not work we can preform a complete airflow balance for the entire system and mak

