Adon Complete Air Conditioning and Heating has provided HVAC services in Plano, TX, for years, serving Collin County from our home base in Anna, just up Highway 75. Whether your AC quits on a July afternoon, your furnace needs attention before the first cold front, or you are ready to upgrade to a more efficient system, our technicians regularly work in Plano neighborhoods and know the homes here well.
Plano is one of the largest cities we serve, and its homes reflect that. We work on older single-stage systems in established East Plano neighborhoods and modern variable-speed equipment in newer Legacy corridor builds. Many larger homes in Plano run two separate HVAC systems, and we are experienced diagnosing and servicing both in the same visit. We service all makes and models; we are a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we are available 24 hours a day, 7 days a week for emergencies.
HVAC Services We Offer in Plano, TX
AC Repair: Same-day AC repair available throughout Plano and Collin County. We diagnose and repair all makes and models, and most calls are resolved in a single visit. When your air conditioning goes out in the Plano heat, we treat it like the emergency it is.
AC Installation and Replacement: When your Plano home needs a new system, we size it correctly using a load calculation and install it to manufacturer specs. All new installations come with up to a 10-year labor warranty. We’ll help you choose the right capacity and efficiency rating for your home, not just the unit that fits the budget.
Heating Repair and Installation: We service gas furnaces, heat pumps, and electric systems throughout Plano. Winters here are mild but the occasional hard freeze is real, and a furnace that won’t fire in January isn’t something you want to wait on. We stock parts for the most common brands and most repairs are done in one visit.
HVAC Maintenance: Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Plano homeowners running two systems, it’s the most practical way to keep both units maintained without scheduling separate visits.
Ductless Mini-Split Systems: Plano’s sunrooms, home offices, garage conversions, and older additions without ductwork are ideal for ductless mini-splits. We install single and multi-zone systems throughout Plano, and they’re significantly more efficient than window units or electric baseboard heat.
Heat Pumps: Heat pumps handle both heating and cooling from a single system and are a practical choice for Plano homeowners who want year-round efficiency. In a climate where extreme cold is rare but energy costs matter, a modern heat pump often outperforms a traditional gas furnace and AC combo on annual operating costs.
Indoor Air Quality: Newer construction in Plano is built tight for energy efficiency, which traps allergens, dust, and humidity inside. We offer air filtration systems, UV air purifiers, ventilators, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Plano area homeowners.
Duct Cleaning and Duct Repair: Leaky or dirty ductwork is one of the most common causes of uneven temperatures and high energy bills in Plano homes, especially two-story and multi-system properties. We inspect, clean, and seal ductwork throughout Plano and Collin County, and fixing the ducts often makes a bigger difference than replacing the equipment.
Why Plano Homeowners Choose Adon Complete for HVAC Service
- We are close by. Based in Anna, TX, our technicians regularly work in Plano and typically reach most addresses in 30 to 40 minutes via Highway 75.
- Owner Jesse Villarreal has over 27 years of HVAC experience. When you call Adon Complete, you are calling a local company where the owner is actively involved and his reputation is on the line with every job.
- We are a Trane Comfort Specialist and Mitsubishi-authorized dealer, which means factory-trained installation and the full manufacturer warranty on every system we install.
- We are experienced with two-system homes. Many larger Plano properties run separate upstairs and downstairs units, and we service both in the same appointment.
- The Adon Care Club is $12 a month. Two tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access year-round.
Neighborhoods We Serve in Plano, TX
We provide HVAC services throughout Plano, including Legacy West, Windhaven Meadows, Willow Bend, Haggard Park, Ridgeview Ranch, Chase Oaks, and the communities along the Dallas North Tollway corridor. We also serve Plano’s neighboring cities, including Allen, McKinney, Frisco, and Anna. If you’re not sure whether we cover your area, call us, and we’ll let you know.
Plano, TX HVAC FAQ
How much does AC repair cost in Plano, TX?
Most AC repairs in Plano run between $150 and $600, depending on the repair type. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs, like a blower motor or evaporator coil, cost more. We give you a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Plano?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Plano and Collin County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC during a Plano summer can’t wait until morning.
My Plano home has two HVAC systems. Can you service both on the same visit?
Yes, and we do it regularly. Many larger Plano homes, particularly those along the DNT corridor and in the Legacy area, run separate systems for the upstairs and downstairs zones. Our technicians can diagnose and service both units in the same appointment, saving time and giving us a complete picture of how the home is performing.
My newer Plano home feels stuffy even though the AC is working fine. What is going on?
Tight construction is usually the culprit. Homes built in Plano’s newer developments are sealed for energy efficiency, which reduces natural air exchange and traps moisture, allergens, and CO2 inside. A whole-home ventilator or ERV brings in fresh outdoor air while recovering the energy you have already spent conditioning the air inside. It is the right fix for stuffy newer construction, and we install them throughout Plano.
What HVAC brands do you service in Plano?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands, but we do not turn down a job because of what brand is on the equipment.
Schedule HVAC Service in Plano, TX Today
Whether you need same-day AC repair, a new system installed, or want to get on a maintenance plan before the heat hits, Adon Complete Air Conditioning and Heating is ready to help. Call us at (903) 482-4900 or click below to schedule. We also serve the surrounding Collin County communities of Allen, McKinney, Wylie, and Anna.
Recent Jobs and Reviews in Plano, TX
Plano, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Plano, TX between March 2026 and April 2026.
The most recent job was on April 27, 2026.
Adon Complete Air Conditioning and Heating has completed 81 jobs in Plano, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Found clogged drain line tripping float switch. Chemical cleaning of outdoor condenser coils as they are extremely dirty and matted. This will produce stress on the refrigerant cycle, and ultimately shortened lifespan of the system. Performed drainline clearing. Made sure to clear line out of condensate pump and primary drainline to condensate pump. Tested and videoed results. Drain line draining well at this time. Performed condenser chemical cleaning. Disassembled outdoor unit to better access the coils. Let chemicals sit in coils for 10 minutes and flushed with water to remove stuck on dust and debris. Tested and ensure system was functioning well upon departure.
Upon completion of my thorough I found that the system could benefit from having a full system cleaning done, there is a substantial amount of dust build up on all the major components. Unit electrical components tested within manufacturer specifications on the inside unit. I treated and flushed the drain lines with totalc and water. I changed the filter for the client. 20x25x4. On the outside unit all electrical components tested within manufacturer specifications. I rinsed the outside with water. Unit was cooling upon departure.
This estimate is for the following: Upstairs 1. Hard Start Kit 2. Condenser and Condenser Coil Cleaning Downstairs 1. Condenser and Condenser Coil Cleaning Preformed installing hard start kit, cleaned both condenser coils with chemicals and water. Powered units back on and tested .mboth are working properly upon departure
Upon completion of my thorough evaluation, I found that while testing the capacitor it was testing below manufacturer specifications at 39/45. If this part were to fail completely the unit would not run or start. I tested all other electrical components on the outside unit all tested within manufacturer specifications. I rinsed the out door unit off with water. On the inside unit I tested all electrical components they all tested within manufacturer specifications. I treated and flushed the drain line with total c. I changed the filter for the client at today’s visit. 20x25x1. Unit was cooling upon departure.
I discovered that the ducts for bedrooms labeled #3 and #4 are kinked and need saddles. I asked the customer if he wanted all of them hung with saddles or just the ducts in question. He opted to just do the kinked ducts. Air flow balance may be needed after hanging the ducts.
Upon completion of my thorough evaluation on the downstairs system. I found that the system could benefit from having a Full system cleaning done on it. This includes duct work, evaporator coil, blower wheel cleaning, and clearing the drain lines. Filter could be upgraded to the Aprilaire 210, current filter box is a perfect fit filter box. The outside unit tested within manufacturer specifications on all electrical components. Temperature was 50 coming into the home. I changed the filter for the client at today’s visit. 17.5x27x5. On the upstairs unit i found that the unit could benefit from having he blower wheel, evaporator coil cleaned and filtration system upgraded to the Aprilaire 210:filter. Current filter has been changed. 17.5x27x5. I treated and tested both drain lines with total c and water. Temperature being supplied to the home was 55 degrees. All electrical components on the outside unit tested within manufacturer specifications. I rinsed both units today with water, th
Upon arrival, I discovered the primary drain was clogged and the pan full of water. The emergency drain does not have any fall in the drain due to design. I vacuumed the water out of the drain line and emergency pan. I pressurized the primary drain line. I joined it back with a T to make a sight pipe after the ptrap. I tested afterwards to ensure it was draining properly.
Upon thorough evaluation of the downstairs system i found that the unit could benefit from having a deep cleaning done on all major components. Duct work, blower wheel and evaporator coil. Also the filtration system could be upgraded to help improve air quality. 20x25x4. Upon thorough evaluation of the upstairs system i found that the unit could benefit from having a deep cleaning done on all major components. Duct work, blower wheel and evaporator coil. Also the filtration system could be upgraded to help improve air quality. 16x25x4. Upon completion of thorough evaluation of the upstairs outside condenser. I found that the capacitor while testing within manufacturer specifications, could benefit from having an upgrade. Also the start amps are starting at 57 amps out of 67.8 max start up amps. By adding a hard start kit it can help bring those amps down. The system also could benefit from a deep cleaning. The system is also not protected by any type of dedicated surge protection for
Upon arrival found the system to be in a high pressure lock out. I reset the system to clear lockout code. We found that the filter and airflow in he cabinet was causing high static pressure and needed to be changed. We ran testing to insure it was tripping due to the filter. We confirmed with the pressure of the system being normal when the filter was out and the pressure would spike when we put the filter back in. We told the client that he can move to a one in filter to help bring down the static pressure. Unit was cooling upon departure

