Menu

Heating and Air Conditioning in Plano, TX

Adon Complete Air Conditioning and Heating has provided HVAC services in Plano, TX, for years, serving Collin County from our home base in Anna, just up Highway 75. Whether your AC quits on a July afternoon, your furnace needs attention before the first cold front, or you are ready to upgrade to a more efficient system, our technicians regularly work in Plano neighborhoods and know the homes here well.

Plano is one of the largest cities we serve, and its homes reflect that. We work on older single-stage systems in established East Plano neighborhoods and modern variable-speed equipment in newer Legacy corridor builds. Many larger homes in Plano run two separate HVAC systems, and we are experienced diagnosing and servicing both in the same visit. We service all makes and models; we are a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we are available 24 hours a day, 7 days a week for emergencies.

Schedule HVAC Service in PlanoCall (903) 482-4900

HVAC Services We Offer in Plano, TX

AC Repair: Same-day AC repair available throughout Plano and Collin County. We diagnose and repair all makes and models, and most calls are resolved in a single visit. When your air conditioning goes out in the Plano heat, we treat it like the emergency it is.

AC Installation and Replacement: When your Plano home needs a new system, we size it correctly using a load calculation and install it to manufacturer specs. All new installations come with up to a 10-year labor warranty. We’ll help you choose the right capacity and efficiency rating for your home, not just the unit that fits the budget.

Heating Repair and Installation: We service gas furnaces, heat pumps, and electric systems throughout Plano. Winters here are mild but the occasional hard freeze is real, and a furnace that won’t fire in January isn’t something you want to wait on. We stock parts for the most common brands and most repairs are done in one visit.

HVAC Maintenance: Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Plano homeowners running two systems, it’s the most practical way to keep both units maintained without scheduling separate visits.

Ductless Mini-Split Systems: Plano’s sunrooms, home offices, garage conversions, and older additions without ductwork are ideal for ductless mini-splits. We install single and multi-zone systems throughout Plano, and they’re significantly more efficient than window units or electric baseboard heat.

Heat Pumps: Heat pumps handle both heating and cooling from a single system and are a practical choice for Plano homeowners who want year-round efficiency. In a climate where extreme cold is rare but energy costs matter, a modern heat pump often outperforms a traditional gas furnace and AC combo on annual operating costs.

Indoor Air Quality: Newer construction in Plano is built tight for energy efficiency, which traps allergens, dust, and humidity inside. We offer air filtration systems, UV air purifiers, ventilators, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Plano area homeowners.

Duct Cleaning and Duct Repair: Leaky or dirty ductwork is one of the most common causes of uneven temperatures and high energy bills in Plano homes, especially two-story and multi-system properties. We inspect, clean, and seal ductwork throughout Plano and Collin County, and fixing the ducts often makes a bigger difference than replacing the equipment.

Why Plano Homeowners Choose Adon Complete for HVAC Service

Neighborhoods We Serve in Plano, TX

We provide HVAC services throughout Plano, including Legacy West, Windhaven Meadows, Willow Bend, Haggard Park, Ridgeview Ranch, Chase Oaks, and the communities along the Dallas North Tollway corridor. We also serve Plano’s neighboring cities, including Allen, McKinney, Frisco, and Anna. If you’re not sure whether we cover your area, call us, and we’ll let you know.

Schedule HVAC Service in PlanoCall (903) 482-4900

Plano, TX HVAC FAQ

How much does AC repair cost in Plano, TX?

Most AC repairs in Plano run between $150 and $600, depending on the repair type. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs, like a blower motor or evaporator coil, cost more. We give you a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Plano?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Plano and Collin County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC during a Plano summer can’t wait until morning.

My Plano home has two HVAC systems. Can you service both on the same visit?

Yes, and we do it regularly. Many larger Plano homes, particularly those along the DNT corridor and in the Legacy area, run separate systems for the upstairs and downstairs zones. Our technicians can diagnose and service both units in the same appointment, saving time and giving us a complete picture of how the home is performing.

My newer Plano home feels stuffy even though the AC is working fine. What is going on?

Tight construction is usually the culprit. Homes built in Plano’s newer developments are sealed for energy efficiency, which reduces natural air exchange and traps moisture, allergens, and CO2 inside. A whole-home ventilator or ERV brings in fresh outdoor air while recovering the energy you have already spent conditioning the air inside. It is the right fix for stuffy newer construction, and we install them throughout Plano.

What HVAC brands do you service in Plano?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands, but we do not turn down a job because of what brand is on the equipment.

Schedule HVAC Service in Plano, TX Today

Whether you need same-day AC repair, a new system installed, or want to get on a maintenance plan before the heat hits, Adon Complete Air Conditioning and Heating is ready to help. Call us at (903) 482-4900 or click below to schedule. We also serve the surrounding Collin County communities of Allen, McKinney, Wylie, and Anna.

Schedule HVAC Service in PlanoCall (903) 482-4900

Recent Jobs and Reviews in Plano, TX

Rated 4.9 out of 5 stars based on 9 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Plano, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Plano, TX between February 2026 and March 2026.

The most recent job was on March 11, 2026.

Adon Complete Air Conditioning and Heating has completed 81 jobs in Plano, TX in the last 12 months. The first job there was in February 2020.

Job Locations

Shelby S.
Shelby S.
I performed a single system cooling maintenance on a 2013 gas system. I checked amps, capacitors, filter, electrical, cleanliness, and safeties. I discovered what appears to be oil stuck in the blower wheel. This indicates that the motor is actively losing its oil and will fail soon. The capacitor for the blower is beginning to read low and may fail soon. The indoor unit does not have surge protection, and the service disconnect has melted spot on the copper blades. I was unable to get a price for the blower motor during the time of service due to it being after 5pm. We will need to price replacing the blower motor tomorrow. Customer declined other options during the time of service.
Plano, TX 75025
Plano, TX - I performed a single system cooling maintenance on a 2013 gas system. I checked amps, capacitors, filter, electrical, cleanliness, and safeties. I discovered what appears to be oil stuck in the blower wheel. This indicates that the motor is actively losing its oil and will fail soon. The capacitor for the blower is beginning to read low and may fail soon. The indoor unit does not have surge protection, and the service disconnect has melted spot on the copper blades. I was unable to get a price for the blower motor during the time of service due to it being after 5pm. We will need to price replacing the blower motor tomorrow. Customer declined other options during the time of service.
Plano, TX - I performed a single system cooling maintenance on a 2013 gas system. I checked amps, capacitors, filter, electrical, cleanliness, and safeties. I discovered what appears to be oil stuck in the blower wheel. This indicates that the motor is actively losing its oil and will fail soon. The capacitor for the blower is beginning to read low and may fail soon. The indoor unit does not have surge protection, and the service disconnect has melted spot on the copper blades. I was unable to get a price for the blower motor during the time of service due to it being after 5pm. We will need to price replacing the blower motor tomorrow. Customer declined other options during the time of service.
Matthew C.
Matthew C.
Found a broken fitting and pvc pipe at the connection of the evaporator coil. Rebuilt drain line and customer signed up for maintenance plan.tested drain line after repair no leaks occurred,
Plano, TX 75075
Plano, TX - Found a broken fitting and pvc pipe at the connection of the evaporator coil. Rebuilt drain line and customer signed up for maintenance plan.tested drain line after repair no leaks occurred,
Plano, TX - Found a broken fitting and pvc pipe at the connection of the evaporator coil. Rebuilt drain line and customer signed up for maintenance plan.tested drain line after repair no leaks occurred,
Matthew C.
Matthew C.
Completed thorough evaluation of 2 system. One from 2023 and one from 2014. I tested all electrical components on the inside units. All tested within manufacturer specifications. I checked for cleanliness as well. All ducts were clean and both blower wheels were in good condition. I tested both drain lines with total c and tested them with water. They are both draining properly at the time of inspection. I changed the filter for the downstairs unit. 20x25x4 Aprilaire 210. Filter for the upstairs unit size is a 20x25x1 inside the ceiling. I proceeded outside to test all electrical components on both systems. All tested within manufacturer specifications on the downstairs system. The upstairs unit could benefit from having an electrical rebuild done on it. The max start up amps are exceeding the limit over 100 and manufacturer rating is at 79 amps. The capacitor is showing signs of oxidation and the Contactor is showing signs of pitting. Both are caused by over amping and could possibly
Plano, TX 75025
Plano, TX - Completed thorough evaluation of 2 system. One from 2023 and one from 2014. I tested all electrical components on the inside units. All tested within manufacturer specifications. I checked for cleanliness as well. All ducts were clean and both blower wheels were in good condition. I tested both drain lines with total c and tested them with water. They are both draining properly at the time of inspection. I changed the filter for the downstairs unit. 20x25x4 Aprilaire 210. Filter for the upstairs unit size is a 20x25x1 inside the ceiling. I proceeded outside to test all electrical components on both systems. All tested within manufacturer specifications on the downstairs system. The upstairs unit could benefit from having an electrical rebuild done on it. The max start up amps are exceeding the limit over 100 and manufacturer rating is at 79 amps. The capacitor is showing signs of oxidation and the Contactor is showing signs of pitting. Both are caused by over amping and could possibly
Plano, TX - Completed thorough evaluation of 2 system. One from 2023 and one from 2014. I tested all electrical components on the inside units. All tested within manufacturer specifications. I checked for cleanliness as well. All ducts were clean and both blower wheels were in good condition. I tested both drain lines with total c and tested them with water. They are both draining properly at the time of inspection. I changed the filter for the downstairs unit. 20x25x4 Aprilaire 210. Filter for the upstairs unit size is a 20x25x1 inside the ceiling. I proceeded outside to test all electrical components on both systems. All tested within manufacturer specifications on the downstairs system. The upstairs unit could benefit from having an electrical rebuild done on it. The max start up amps are exceeding the limit over 100 and manufacturer rating is at 79 amps. The capacitor is showing signs of oxidation and the Contactor is showing signs of pitting. Both are caused by over amping and could possibly
Matthew C.
Matthew C.
Upon arrival client stated that there was no power to the thermostat. He verified the breakers were all on. After taking the air handler panel off. I found the high voltage wire to have been burnt and out of the Contactor, I also found the Contactor to be burnt. I replaced the Contactor and the burnt wire under parts and labor warranty. Unit is now heating properly upon repair.
Plano, TX 75074
Plano, TX - Upon arrival client stated that there was no power to the thermostat. He verified the breakers were all on. After taking the air handler panel off. I found the high voltage wire to have been burnt and out of the Contactor, I also found the Contactor to be burnt. I replaced the Contactor and the burnt wire under parts and labor warranty.  Unit is now heating properly upon repair.
Plano, TX - Upon arrival client stated that there was no power to the thermostat. He verified the breakers were all on. After taking the air handler panel off. I found the high voltage wire to have been burnt and out of the Contactor, I also found the Contactor to be burnt. I replaced the Contactor and the burnt wire under parts and labor warranty.  Unit is now heating properly upon repair.
Shelby S.
Shelby S.
I performed 2 heating maintenances on gas systems. The downstairs unit is a 2017 furnace - 2023 coil/condenser. The upstairs is completely 2024. I checked amps, capacitors, filters, electrical, cleanliness, and safeties. The systems are performing as intended with minimal concern. I spoke with the homeowner and advised that drain treatment would be a great idea due to past history of the equipment. The downstairs blower wheel is reasonably dirty. To reduce the chance of damage occurring, it is advised to clean the blower wheel. Customer declined options at the time of service.
Plano, TX 75024
Plano, TX - I performed 2 heating maintenances on gas systems. The downstairs unit is a 2017 furnace - 2023 coil/condenser. The upstairs is completely 2024. I checked amps, capacitors, filters, electrical, cleanliness, and safeties. The systems are performing as intended with minimal concern. I spoke with the homeowner and advised that drain treatment would be a great idea due to past history of the equipment. The downstairs blower wheel is reasonably dirty. To reduce the chance of damage occurring, it is advised to clean the blower wheel. Customer declined options at the time of service.
Plano, TX - I performed 2 heating maintenances on gas systems. The downstairs unit is a 2017 furnace - 2023 coil/condenser. The upstairs is completely 2024. I checked amps, capacitors, filters, electrical, cleanliness, and safeties. The systems are performing as intended with minimal concern. I spoke with the homeowner and advised that drain treatment would be a great idea due to past history of the equipment. The downstairs blower wheel is reasonably dirty. To reduce the chance of damage occurring, it is advised to clean the blower wheel. Customer declined options at the time of service.
Jesse V.
Jesse V.
Preformed single system cooling maintenance 2008. I tested all electrical components on the inside unit. All tested within manufacturer specifications. I checked for cleanliness of the system. The system could benefit from a deep cleaning of the full system. I treated drain lines. We talked about installing a better filtration system. I proceeded outside where I found the condenser to be extremely dirty. Also I tested all the electrical components. Unit could benefit from having all electrical components replaced and adding a hard start kit to help with over amping and prolonging the life of the unit. Unit was cooling upon departure.
Plano, TX 75075
Plano, TX - Preformed single system cooling maintenance 2008. I tested all electrical components on the inside unit. All tested within manufacturer specifications. I checked for cleanliness of the system. The system could benefit from a deep cleaning of the full system. I treated drain lines. We talked about installing a better filtration system. I proceeded outside where I found the condenser to be extremely dirty. Also I tested all the electrical components. Unit could benefit from having all electrical components replaced and adding a hard start kit to help with over amping and prolonging the life of the unit. Unit was cooling upon departure.
Plano, TX - Preformed single system cooling maintenance 2008. I tested all electrical components on the inside unit. All tested within manufacturer specifications. I checked for cleanliness of the system. The system could benefit from a deep cleaning of the full system. I treated drain lines. We talked about installing a better filtration system. I proceeded outside where I found the condenser to be extremely dirty. Also I tested all the electrical components. Unit could benefit from having all electrical components replaced and adding a hard start kit to help with over amping and prolonging the life of the unit. Unit was cooling upon departure.
Jesse V.
Jesse V.
gave ballpark price to customer at BNI and we was expecting less than 1k
Plano, TX 75025
Matthew C.
Matthew C.
Upon on arrival client stated ac wasn’t working, provided a call for cooling, everything on the ac side was working within manufacturer specifications. I tested the heating side to make sure it was working . I found that the inducer motor was out, not allowing the sequence of operations to work properly. Will provide estimates for having motor replace and full system replacement.
Plano, TX 75074
Plano, TX - Upon on arrival client stated ac wasn’t working, provided a call for cooling, everything on the ac side was working within manufacturer specifications. I tested the heating side to make sure it was working . I found that the inducer motor was out, not allowing the sequence of operations to work properly. Will provide estimates for having motor replace and full system replacement.
Plano, TX - Upon on arrival client stated ac wasn’t working, provided a call for cooling, everything on the ac side was working within manufacturer specifications. I tested the heating side to make sure it was working . I found that the inducer motor was out, not allowing the sequence of operations to work properly. Will provide estimates for having motor replace and full system replacement.
Brayden W.
Brayden W.
Performed maintenance on 2020 Trane furnace 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested for gas leaks 6. Tested functionality and cleaned flame sensor 7. Tested functionality and cleaned pressure switches and ports 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Tested functionality and visually inspected surface igniter 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Drain line tested with gallon of water for clogs and to push anything trying to solidify out Upon initial inspection, I noticed a gas smell near the burner log. Upon further inspection, I was able to verify gas was leaking out of the orifices when the unit was off. This indicates a faulty gas valve that is not fully closing. I also noticed a decent amou
Plano, TX 75023
Plano, TX - Performed maintenance on 2020 Trane furnace 
1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested for gas leaks
6. Tested functionality and cleaned flame sensor
7. Tested functionality and cleaned pressure switches and ports
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Tested functionality and visually inspected surface igniter
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Drain line tested with gallon of water for clogs and to push anything trying to solidify out

Upon initial inspection, I noticed a gas smell near the burner log. Upon further inspection, I was able to verify gas was leaking out of the orifices when the unit was off. This indicates a faulty gas valve that is not fully closing. I also noticed a decent amou
Plano, TX - Performed maintenance on 2020 Trane furnace 
1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested for gas leaks
6. Tested functionality and cleaned flame sensor
7. Tested functionality and cleaned pressure switches and ports
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Tested functionality and visually inspected surface igniter
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Drain line tested with gallon of water for clogs and to push anything trying to solidify out

Upon initial inspection, I noticed a gas smell near the burner log. Upon further inspection, I was able to verify gas was leaking out of the orifices when the unit was off. This indicates a faulty gas valve that is not fully closing. I also noticed a decent amou
Jesse V.
Jesse V.
determined noise was coming from rusted attic vent fan, roofer will need to come out and replace to make the noise go away.
Plano, TX 75023

Your High Efficiency

Experts