Twenty-five service calls in Prosper between January and September 2026. That’s not a number we’re making up – it comes from our own technicians’ job logs. Adon Complete Air Conditioning and Heating has been running AC repair and HVAC service calls in Prosper, TX for years, and the homes here are exactly what our technicians are built for. Large floor plans, multiple systems, a mix of 2016-era Trane and Lennox units hitting the ten-year mark alongside brand-new 2023 and 2025 installs. We know what’s in these homes because we’ve worked on them. We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week.
What We See on Prosper Service Calls
Prosper’s homes tend to run two, three, or four HVAC systems. Many of the 2016 builds are reaching the point where capacitors, blower motors, and contactors are starting to wear. The newer 2023 and 2025 installs are still early in their life but need proper maintenance to protect the manufacturer’s warranty. Here’s a snapshot of what our technicians handle in Prosper regularly:
Four-system maintenance on a home with three 2016 Trane units and one 2025 Lennox. Two-system maintenance on back-to-back 2020 and 2023 Trane gas systems. Air balance diagnostics for a master bedroom hotspot. Mold inspection near an evaporator coil drain. Surge protector installations on outdoor disconnects. Blower motor replacements. Aprilaire filter upgrades from standard four-inch box filters. These are not unusual calls for Prosper. They’re typical.
Services We Offer in Prosper
AC Repair. All makes and models. From a failed capacitor on a 2016 unit to a blower motor replacement on a newer system, we diagnose it and fix it right.
AC and Heating Installation. Whether you’re replacing one aging unit or upgrading an entire multi-system setup, we size everything using a proper load calculation and back every installation with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month. Two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. For Prosper homeowners with multiple systems, staying on a maintenance schedule is one of the smartest ways to catch problems early.
Mini-Split Installation. In-law suites, bonus rooms, and detached garages are common in Prosper’s larger homes. Our technicians have installed ductless systems throughout Prosper as a practical solution for spaces the central system doesn’t reach well.
Heat Pump Installation and Repair. Heat pumps are turning up more frequently in Prosper’s newer builds. We install and service them alongside traditional gas systems throughout the area.
Indoor Air Quality. Our technicians have recommended UV light installations, Aprilaire filter upgrades, and duct cleaning on multiple Prosper service calls this year. If your systems are aging or you’ve had moisture or air quality concerns, we offer a free “What Are You Breathing?” screening.
Air Duct Cleaning. Several of our Prosper job notes this year flag ductwork and blower wheels that are overdue for cleaning on 2016-era systems. Professional duct cleaning improves air quality and helps the system run more efficiently.
Air Duct Repair and Sealing. Leaky ducts account for 20 to 30 percent of system output loss. We’ve found and fixed duct issues on Prosper homes that were causing uneven cooling between floors. We inspect, repair, and seal ductwork throughout the area.
About Adon Complete
Owner Jesse Villarreal has been in HVAC for over 27 years. We’re based in Anna and run calls throughout Collin County every day. As a Trane Comfort Specialist and Mitsubishi-authorized dealer we have factory-trained technicians on the brands most common in Prosper’s homes. We service everything, not just what we sell, and we give you a straight answer about what the system needs before we do any work.
Prosper and Surrounding Collin County Communities
We serve all of Prosper and the surrounding communities, including Celina, Frisco, McKinney, Allen, and Anna, throughout Collin County.
Common Questions From Prosper Homeowners
My home has three or four HVAC systems. Can you handle all of them?
Yes. Multi-system homes are standard for us in Prosper. We’ve done four-system maintenance visits, diagnosed air balance issues between floors, and replaced components on multiple units in a single visit. One call covers everything.
My 2016 Trane units are starting to have issues. Should I repair or replace?
That depends on what’s failing and the overall condition of the system. A capacitor or contactor replacement on a 2016 unit is usually worth doing. A compressor failure on the same system is a different conversation. We give you an honest assessment of what it would cost to repair versus what a replacement would run, and we let you make the call. Call (903) 482-4900 to schedule a diagnostic visit.
How often should multi-system homes in Prosper get maintenance?
Twice a year minimum. Spring before cooling season and fall before heating season. With multiple systems running, catching a failing capacitor or a dirty blower wheel early prevents the kind of emergency repairs that happen at the worst possible time. Our Adon Care Club at $12 a month covers all of your systems on those two visits.
Do you install surge protectors for HVAC systems in Prosper?
Yes. We recommend surge protectors on outdoor disconnects for Prosper homes, especially homes that took lightning-related damage or had a disconnect issue. We’ve installed them on multiple Prosper properties this year. A surge protector is a straightforward way to protect equipment that’s expensive to replace.
What areas near Prosper do you serve?
We serve all of Prosper and the surrounding Collin County communities, including Celina, Frisco, McKinney, Allen, and Anna.
Schedule AC Repair or HVAC Service in Prosper
Whether you need a repair, a maintenance visit on multiple systems, or just want to get a set of eyes on aging equipment, call our team at Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online. We know Prosper, and we’re ready to help.
Recent Jobs and Reviews in Prosper, TX
Prosper, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Prosper, TX between November 2025 and March 2026.
The most recent job was on March 24, 2026.
Adon Complete Air Conditioning and Heating has completed 30 jobs in Prosper, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Upon completion of my thorough evaluation of the system, I found the systems filtration could benefit from being upgraded from the four inch box filters to the Aprilaire filters. The Aprilaire air filter provides better coverage, helps protect the system from dust and helps combat allergens. Also I found that the duct work was beginning to show signs of needing to be cleaned. Over all the other major components were in good working order. Tempture being supplied to the home was at 48 degrees and 70degrees returning to the unit. I tested and treated drain lines with total c Filter did not need to be changed at this time. 20x25x4. I proceeded to the outside unit and all electrical components were in good working order, I rinsed the unit durning today’s visit. Unit was cooling upon departure.
2019 gas units. Upon completion of my thorough evaluation i found that the blower wheel on this unit could benefit from a good cleaning by cleaning it will help with the performance and efficiency of the unit. Also I noticed he filter can be upgraded to an Aprilaire filtration system. 20x25x4. On the condenser unit the unit could benefit from installing a hard start kit, to help bring down the start amps from being over 100 amps, manufacture rating is 109. Also the unit doesn’t have any type of surge protection on it. By installing a surge protector you can help prevent damage to he unit caused by lightning strikes and other types of surges in power Upon completion of my thorough evaluation i found that the blower wheel on this unit could benefit from a good cleaning by cleaning it will help with the performance and efficiency of the unit. Also I noticed he filter can be upgraded to an Aprilaire filtration system 16x25x4. Also the unit doesn’t have any type of surge protection on i
Upon arrival, I found the outdoor unit not working. I verified my 24v to the outdoor unit. I followed power until I came across rodent damage to both pressure switches. The damage is severe enough that the wire is not repairable. Due to it being rodent damage, it is not covered by warranty. Customer asked questions about his drain. I provided options to address the pressure switches and add a primary float switch/blow out valve to the system. The customer declined at the time of service.
Responded to service call regarding HVAC system repeatedly generating fault alerts and requiring manual resets to restore operation. Upon arrival, performed full diagnostic evaluation of the system, including control board fault code review, sensor resistance checks, and system performance verification. Troubleshooting revealed a failed evaporator coil temperature sensor providing inaccurate temperature feedback to the control board, resulting in system lockout conditions. Further diagnostics confirmed a failed suction line temperature sensor, causing improper superheat monitoring and triggering protective fault alerts. Verified wiring integrity, checked sensor resistance values against manufacturer specifications, and confirmed both sensors were operating outside acceptable parameters. Recommended replacement of the evaporator coil sensor and suction line sensor to restore proper system monitoring, prevent nuisance lockouts, and ensure reliable system performance. System left in sa
Preformed warranty outdoor temperature sensor replacement. Unit was heating upon departure.
Preformed 4 system heating maintenance on 3-2016 gas furnace and 1-2025 gas furnace. Tested all electrical and safeties components on each system. All tested within manufacturer specifications. We did notice each filter does need to be changed, client did not have filters for us ri changed out. 20x25x4. We noticed there were about 1inch gaps at the top of the filter and filter box. We provided estimates to add Aprilaire conversion racks and filters for better filtration. We also noticed on the downstairs unit the ducts, plenum boxes and blower wheel were extremely dusty. We provided estimates to have all cleanings addressed.
Performed a complete heating system maintenance and inspection on 2 2020 Gas system. Inspected and tested all electrical components and safety controls on the indoor unit; all components tested within manufacturer specifications. On both units. Verified system temperatures: return air temperature measured at 71°F; supply air temperature measured at 110°F and risining. The down stairs unit was at 115F and 81 return. Confirmed air filter was recently replaced by client; filter size is 20 x 25” x 4”. I visually inspected the outdoor units The outdoor unit was in good condition Confirmed system was operating properly and heating upon departure. System Status: Operating normally at time of service.
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested for gas leaks 6. Tested functionality and cleaned flame sensor 7. Tested functionality and cleaned pressure switches and ports 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Tested functionality and visually inspected surface igniter 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. All is well with normal heating cycle. Adjusted aprilaire fresh air intake to 15 from 8 minutes per hour. Blower wheel and evaporator is clean. Surge protection installed on equipment working as intended. Unit in good working order upon departure
Dryer Vent Cleaning, preformed work and presented before and after pictures of results. I preformed a 2 system heat maintenance on 2023 communicating Trane gas furnaces. I tested all electrical and safety components on each system. All tested within manufacturer specifications. I changed both filters at the time of inspection. 20x25x4 and 16x25x4. Temperature being supplied downstairs was at 109 degrees and 73 return. Upstairs was 106 and 68. I proceeded outside to visually inspect the outside units. While visually inspecting I noticed each system did not have any surge protection on the system. Surge protection cause be beneficial to add just in case of a lightning strike and/or surges in power. I provided estimates to have the surge protection installed. Units were heating upon departure.
Preformed 3 system heating maintenance 2014 gas. Tested all electrical components and safeties on each of the units. All tested within manufacturer specifications. We changed all filters 20x25x4(2) and 16x25x4. We did find that the master bedroom blower wheel could benefit from a good cleaning, also found on the upstairs unit and down stairs unit that both could benefit from a duct and plenum box cleaning. Units were cooling upon departure.

