Twenty-five service calls in Prosper between January and September 2026. That’s not a number we’re making up – it comes from our own technicians’ job logs. Adon Complete Air Conditioning and Heating has been running AC repair and HVAC service calls in Prosper, TX for years, and the homes here are exactly what our technicians are built for. Large floor plans, multiple systems, a mix of 2016-era Trane and Lennox units hitting the ten-year mark alongside brand-new 2023 and 2025 installs. We know what’s in these homes because we’ve worked on them. We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week.
What We See on Prosper Service Calls
Prosper’s homes tend to run two, three, or four HVAC systems. Many of the 2016 builds are reaching the point where capacitors, blower motors, and contactors are starting to wear. The newer 2023 and 2025 installs are still early in their life but need proper maintenance to protect the manufacturer’s warranty. Here’s a snapshot of what our technicians handle in Prosper regularly:
Four-system maintenance on a home with three 2016 Trane units and one 2025 Lennox. Two-system maintenance on back-to-back 2020 and 2023 Trane gas systems. Air balance diagnostics for a master bedroom hotspot. Mold inspection near an evaporator coil drain. Surge protector installations on outdoor disconnects. Blower motor replacements. Aprilaire filter upgrades from standard four-inch box filters. These are not unusual calls for Prosper. They’re typical.
Services We Offer in Prosper
AC Repair. All makes and models. From a failed capacitor on a 2016 unit to a blower motor replacement on a newer system, we diagnose it and fix it right.
AC and Heating Installation. Whether you’re replacing one aging unit or upgrading an entire multi-system setup, we size everything using a proper load calculation and back every installation with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month. Two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. For Prosper homeowners with multiple systems, staying on a maintenance schedule is one of the smartest ways to catch problems early.
Mini-Split Installation. In-law suites, bonus rooms, and detached garages are common in Prosper’s larger homes. Our technicians have installed ductless systems throughout Prosper as a practical solution for spaces the central system doesn’t reach well.
Heat Pump Installation and Repair. Heat pumps are turning up more frequently in Prosper’s newer builds. We install and service them alongside traditional gas systems throughout the area.
Indoor Air Quality. Our technicians have recommended UV light installations, Aprilaire filter upgrades, and duct cleaning on multiple Prosper service calls this year. If your systems are aging or you’ve had moisture or air quality concerns, we offer a free “What Are You Breathing?” screening.
Air Duct Cleaning. Several of our Prosper job notes this year flag ductwork and blower wheels that are overdue for cleaning on 2016-era systems. Professional duct cleaning improves air quality and helps the system run more efficiently.
Air Duct Repair and Sealing. Leaky ducts account for 20 to 30 percent of system output loss. We’ve found and fixed duct issues on Prosper homes that were causing uneven cooling between floors. We inspect, repair, and seal ductwork throughout the area.
About Adon Complete
Owner Jesse Villarreal has been in HVAC for over 27 years. We’re based in Anna and run calls throughout Collin County every day. As a Trane Comfort Specialist and Mitsubishi-authorized dealer we have factory-trained technicians on the brands most common in Prosper’s homes. We service everything, not just what we sell, and we give you a straight answer about what the system needs before we do any work.
Prosper and Surrounding Collin County Communities
We serve all of Prosper and the surrounding communities, including Celina, Frisco, McKinney, Allen, and Anna, throughout Collin County.
Common Questions From Prosper Homeowners
My home has three or four HVAC systems. Can you handle all of them?
Yes. Multi-system homes are standard for us in Prosper. We’ve done four-system maintenance visits, diagnosed air balance issues between floors, and replaced components on multiple units in a single visit. One call covers everything.
My 2016 Trane units are starting to have issues. Should I repair or replace?
That depends on what’s failing and the overall condition of the system. A capacitor or contactor replacement on a 2016 unit is usually worth doing. A compressor failure on the same system is a different conversation. We give you an honest assessment of what it would cost to repair versus what a replacement would run, and we let you make the call. Call (903) 482-4900 to schedule a diagnostic visit.
How often should multi-system homes in Prosper get maintenance?
Twice a year minimum. Spring before cooling season and fall before heating season. With multiple systems running, catching a failing capacitor or a dirty blower wheel early prevents the kind of emergency repairs that happen at the worst possible time. Our Adon Care Club at $12 a month covers all of your systems on those two visits.
Do you install surge protectors for HVAC systems in Prosper?
Yes. We recommend surge protectors on outdoor disconnects for Prosper homes, especially homes that took lightning-related damage or had a disconnect issue. We’ve installed them on multiple Prosper properties this year. A surge protector is a straightforward way to protect equipment that’s expensive to replace.
What areas near Prosper do you serve?
We serve all of Prosper and the surrounding Collin County communities, including Celina, Frisco, McKinney, Allen, and Anna.
Schedule AC Repair or HVAC Service in Prosper
Whether you need a repair, a maintenance visit on multiple systems, or just want to get a set of eyes on aging equipment, call our team at Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online. We know Prosper, and we’re ready to help.
Recent Jobs and Reviews in Prosper, TX
Prosper, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Prosper, TX between July 2025 and October 2025.
The most recent job was on October 30, 2025.
Adon Complete Air Conditioning and Heating has completed 30 jobs in Prosper, TX in the last 12 months. The first job there was in March 2020.
Job Locations
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Rinsed condenser unit to promote heat exchange 16. Inspected heat strips for functionality Found loose wire to heat strips made sure to secure this wire and tested heat strips and found no issues. Air quality is superb. Unit in good working order upon departure.
Heating preventative maintenance on two gas systems from 2019 using air filters 20*25*1 (main unit) and 16*25*1 (master bedroom). During our inspection we checked temperatures, checked electrical connections and components, measured the attic insulation, changed air filters with ones customer provided, performed a gas leak search on both units, cleaned safety sensors, and inspected the systems for dirt buildup. Overall the systems are heating properly and safe. We did notice the systems don’t have surge protection and informed the customer but he isn’t interested at this time. Customer is on a monthly payment vip agreement.
Blower motor replacement Arrived at our clients home to confirm the diagnosis for the intermittently failing blower motor. I was in the process of diagnosing the motor but was unable to replicate the issue. Jody requested I replace the motor and take care of the issue for her. Once the motor was replaced I proceeded to test and inspect the refrigerant pressures for the system. Everything measured within manufacturer specifications. We turned the thermostat down to 76º and we discussed how the unit will run for a while before satisfying the desired set piping. The system is cooling on departure.
We installed new txv and filter dryer. We didn't need any refrigerant
Arrived on site, found alerts on thermostat for low pressure lock out. Reset power on system and it came on. Measured refrigerant pressures and found there to be a restriction on the low side. Upon further inspection, we found that some of the TXV capillaries are touching the liquid line. Upon removing the sensing bulb and warming it up pressures returned to normal. We removed the capillaries from the liquid line and adjusted the bulb position to 2 o’clock from 3 o’clock. Pressures started to look better after this, but still indicating a restriction in the system. Informed homeowner that we will need to replace this txv under parts and labor warranty.
Arrived on site, and found water dripping out of emergency drain line. Upon inspecting the attic unit, I found water in the drain pan. Outside I found the drain line was run into an irrigation box a little too deep. Upon lifting the drain line a little out of the water, water immediately began draining out. Made drain line adjustments to shorten the pvc going into the drainage box to allow overflow. 20 degree split across the coil was measured with a 53 degree supply. Extensively tested drain line to ensure the line was clear and found it to be draining fine at this time. Unit in good working order upon departure.
Arrived on site for quality control check. Started inspection of indoor unit, found unit to be putting out a cold 55 degrees with more than a 20 degree temperature split. Inspected wiring connections and found no issues. No obstructions of the indoor coil or air leaks. Tested drain lines and found a small issue with the negative pressure of the unit sucking up water. Added a cap to prevent this from happening. Checked refrigerant pressures and found them to be in range. Outdoor unit is leveled properly. Tested float switch to ensure proper operation of safety features and found no issues. Inspected line set and found it to be free of leaks or kinks. Unit is in good working order upon departure.
Scope of Work – Upstairs System Upgrade The existing upstairs HVAC system is currently a 3-ton unit. This project will involve upgrading the upstairs system to a 5-ton TRANE system to increase cooling capacity. System Components: • Outdoor Condenser: 5-ton rated TRANE condenser. • Evaporator Coil: Upgraded to meet full 5-ton capacity. • Gas Furnace: Upgraded to an 80,000 BTU TRANE gas furnace. Ductwork: • If any additional ductwork modifications are required to meet 5-ton airflow requirements, this will be the customer’s responsibility. • This scope covers only the system change-out to achieve the 5-ton capacity for the upstairs unit. Warranty Coverage: • 10-Year Manufacturer Mechanical Warranty – Provided through TRANE. • 2-Year Labor Warranty – Provided through JB Associates.
Upon arrival spoke to clients wife about the hot spots in the house. She showed us which rooms were hotter than others in the upstairs. One being the daughters bedroom and the other being sons bedroom. We proceeded up into the attic space and adjusted the dampers on the two supply ducts. We proceeded to do the cooling maintenance for all three systems. We check all electrical components on the inside units. All tested within manufacture specifications. We did notice that all three could benefit having a safety float switch added to the main drain lines. The upstairs and down stairs units ducts are dirty. Provided estimates for duct cleanings wi5 7 additional returns along with 3 float switches. Master bedroom ducts were not dirt at the time of the inspection. Master bedroom unit filter was changed. upstairs and downstairs filters were not available to change. Size20x25x4 We proceeded to the outside units. We test all electrical components on each of the units. The maters bedroom uni
Preformed cooling maintenance for 2 systems. Tested all electrical components on inside and outside units. All tested within manufacture specifications. Tested run and start amps on outside units. The down stairs unit could benefit from having a hard start kit installed to help get the amps down on units start up. The upstairs unit start and run amps are testing within manufacture specifications. Rinsed both outside units coils. Changed filters for client. Treated main drain lines on both units with total c. Units are cooling upon departure. 521 ELECTRONIC HARD START 189-227 UF 170-277V 1 HP AND UP HARD STARTS ARE USED TO GIVE COMPRESSORS A HIGHER STARTING BOOST OF CURRENT WHEN NEEDED TO START. 521 compressor saver comes with a manufacturer warranty of 2 years from date of installation.

