Twenty-five service calls in Prosper between January and September 2026. That’s not a number we’re making up – it comes from our own technicians’ job logs. Adon Complete Air Conditioning and Heating has been running AC repair and HVAC service calls in Prosper, TX for years, and the homes here are exactly what our technicians are built for. Large floor plans, multiple systems, a mix of 2016-era Trane and Lennox units hitting the ten-year mark alongside brand-new 2023 and 2025 installs. We know what’s in these homes because we’ve worked on them. We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week.
What We See on Prosper Service Calls
Prosper’s homes tend to run two, three, or four HVAC systems. Many of the 2016 builds are reaching the point where capacitors, blower motors, and contactors are starting to wear. The newer 2023 and 2025 installs are still early in their life but need proper maintenance to protect the manufacturer’s warranty. Here’s a snapshot of what our technicians handle in Prosper regularly:
Four-system maintenance on a home with three 2016 Trane units and one 2025 Lennox. Two-system maintenance on back-to-back 2020 and 2023 Trane gas systems. Air balance diagnostics for a master bedroom hotspot. Mold inspection near an evaporator coil drain. Surge protector installations on outdoor disconnects. Blower motor replacements. Aprilaire filter upgrades from standard four-inch box filters. These are not unusual calls for Prosper. They’re typical.
Services We Offer in Prosper
AC Repair. All makes and models. From a failed capacitor on a 2016 unit to a blower motor replacement on a newer system, we diagnose it and fix it right.
AC and Heating Installation. Whether you’re replacing one aging unit or upgrading an entire multi-system setup, we size everything using a proper load calculation and back every installation with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month. Two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. For Prosper homeowners with multiple systems, staying on a maintenance schedule is one of the smartest ways to catch problems early.
Mini-Split Installation. In-law suites, bonus rooms, and detached garages are common in Prosper’s larger homes. Our technicians have installed ductless systems throughout Prosper as a practical solution for spaces the central system doesn’t reach well.
Heat Pump Installation and Repair. Heat pumps are turning up more frequently in Prosper’s newer builds. We install and service them alongside traditional gas systems throughout the area.
Indoor Air Quality. Our technicians have recommended UV light installations, Aprilaire filter upgrades, and duct cleaning on multiple Prosper service calls this year. If your systems are aging or you’ve had moisture or air quality concerns, we offer a free “What Are You Breathing?” screening.
Air Duct Cleaning. Several of our Prosper job notes this year flag ductwork and blower wheels that are overdue for cleaning on 2016-era systems. Professional duct cleaning improves air quality and helps the system run more efficiently.
Air Duct Repair and Sealing. Leaky ducts account for 20 to 30 percent of system output loss. We’ve found and fixed duct issues on Prosper homes that were causing uneven cooling between floors. We inspect, repair, and seal ductwork throughout the area.
About Adon Complete
Owner Jesse Villarreal has been in HVAC for over 27 years. We’re based in Anna and run calls throughout Collin County every day. As a Trane Comfort Specialist and Mitsubishi-authorized dealer we have factory-trained technicians on the brands most common in Prosper’s homes. We service everything, not just what we sell, and we give you a straight answer about what the system needs before we do any work.
Prosper and Surrounding Collin County Communities
We serve all of Prosper and the surrounding communities, including Celina, Frisco, McKinney, Allen, and Anna, throughout Collin County.
Common Questions From Prosper Homeowners
My home has three or four HVAC systems. Can you handle all of them?
Yes. Multi-system homes are standard for us in Prosper. We’ve done four-system maintenance visits, diagnosed air balance issues between floors, and replaced components on multiple units in a single visit. One call covers everything.
My 2016 Trane units are starting to have issues. Should I repair or replace?
That depends on what’s failing and the overall condition of the system. A capacitor or contactor replacement on a 2016 unit is usually worth doing. A compressor failure on the same system is a different conversation. We give you an honest assessment of what it would cost to repair versus what a replacement would run, and we let you make the call. Call (903) 482-4900 to schedule a diagnostic visit.
How often should multi-system homes in Prosper get maintenance?
Twice a year minimum. Spring before cooling season and fall before heating season. With multiple systems running, catching a failing capacitor or a dirty blower wheel early prevents the kind of emergency repairs that happen at the worst possible time. Our Adon Care Club at $12 a month covers all of your systems on those two visits.
Do you install surge protectors for HVAC systems in Prosper?
Yes. We recommend surge protectors on outdoor disconnects for Prosper homes, especially homes that took lightning-related damage or had a disconnect issue. We’ve installed them on multiple Prosper properties this year. A surge protector is a straightforward way to protect equipment that’s expensive to replace.
What areas near Prosper do you serve?
We serve all of Prosper and the surrounding Collin County communities, including Celina, Frisco, McKinney, Allen, and Anna.
Schedule AC Repair or HVAC Service in Prosper
Whether you need a repair, a maintenance visit on multiple systems, or just want to get a set of eyes on aging equipment, call our team at Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online. We know Prosper, and we’re ready to help.
Recent Jobs and Reviews in Prosper, TX
Prosper, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Prosper, TX between October 2024 and March 2025.
The most recent job was on March 18, 2025.
Adon Complete Air Conditioning and Heating has completed 30 jobs in Prosper, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Performed a 1 system spring maintenance ( gas). Tasks performed. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked refrigerant pressures were. 7. Checked compressor amp draw. 8. Checked condenser fan motor amp draw. 9. Inspected / replaced return filter. 10. Inspected return plenum for debris/ dirty. 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel. 13. Checked blower amp draw. 14. Measured temperature differential . 15. Inspected drain lines. 1. Washed condenser unit.
Arrived at our clients home for two system heat maintenance inspection. Our client provided me with new filters to be replaced today. Once the filters were replaced at proceeded to test and inspect the fire safety shut off for both units. I clean both flame sensors, pressure switch ports, and furnace cabinets for both units. Our client is in the process of selling her home and I mentioned that the downstairs older unit may need a sediment trap added to the gas line for the furnace. To have this installed today to help bring the furnace up to code. As a courtesy also I did cut back some roof Material that was close to the flue pipe of the furnace. Everything is working and heating properly on departure.
Found the system popping the fuse in the cooling cycle. I investigated the outdoor unit and found a shorted contactor. I replaced the contactor and tested the unit. The unit is back to being fully operational and cooling to manufacture specifications.
Form system maintenance on 2 systems both systems are from 2003 systems. System #2 requires gas code upgrade, capacitor for indoor blow motor and outdoor condensing unit, unit also needs a P-trap with a secondary float switch to any water leaking onto emergency drain pan, emergency drain pan 30 x 30 System #1 requires a gas upgrade sediment trap. P-trap for the condensation line with an emergency float switch , a secondary drain pen 30 x 30 a capacitor for the indoor blower motor.
Performed two system heating management. Checked amps, electrical, safeties, cleanliness, drains, and filter. System is performing to manufacture specifications in heating. Recommendations 1. Filtration of both systems are poor. I recommend converting it over to a Aprilaire filter. This will help keep the ducts, blower, and evaporator coil cleaner. 2. Both systems have dirty blowers. This causes the motor to have to work harder and will ultimately lead to a prematurely failed blower motor.
Came out for 2 system maintenance. Our installs 1 yr old gas systems. Started by turning heat up at tstats. Once engaged checked all heating elements to verify proper heating sequence. Burners are firing properly, safeties are operating as designed. Filters were extremely dirty causing units to over condensate. Changed out filters (20x25)&(16x25) Return ducts are extremely dirty however rest of ducts are still in good condition recommend duct cleaning to keep systems in top condition as well as adding surge protection to protect against power surges. Thank you for your time and allowing me into your home.
Found downstairs low on R410a but not as severely as the u/s system. Offered to add refrigerant and customer declined at the time of service. Provided pricing to replace both evaporator coils.
Found system low on R410A. Located a leak in the evaporator coil. I had the office run the warranty and confirmed it is under warranty until 2028. Provided pricing to replace evaporator coil.
Fall PM- Checked: blower motor and wheel, electrical wiring and connections, limit switches and safety controls, airflow, filters, temperature rise, thermostat, amp draws, capacitor, gas line and connections, (no gas leaks), gas flow, burners, orifices, ignitor, heat exchangers, and flame quality. The flame sensor was cleaned.
Came out today for 1 system maintenance. Upon arrival started with outside inverter system, checked all electrical components and washed outside unit. Coil fins are clean and in good condition, no signs of burn marks. Surge protection is operating as designed. On indoor air handler checked all electrical components all components are in good condition with no signs of burn marks. Filter was just changed 20x25x4, ducts are clean as well as ecm motor and wheel is clean from last visit. Only recommendation I have is to add pan treatment into system to keep drain lines clear. Thank you for your time and allowing me into your home.

