Menu

Heating and Air Conditioning Services in Richardson, TX

Adon Complete Air Conditioning and Heating provides HVAC services in Richardson, TX, running calls throughout Dallas and Collin County from our home base in Anna. Richardson sits right along the border of both counties, and we serve the full city – from the older ranch-style homes near downtown and the University of Texas at Dallas area to the commercial properties along the Telecom Corridor on US-75. Whether your AC goes out in the summer heat or your furnace needs service before a cold front moves through, we’re a straightforward call away.

Richardson’s housing stock skews older than many of the cities we serve, with a lot of homes built in the 1960s, 70s, and 80s that are on their second or third HVAC system. We know these homes well – older ductwork, non-standard configurations, systems that have been patched over the years. We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we offer 24/7 emergency service throughout Richardson and the surrounding area.

Schedule HVAC Service in RichardsonCall (903) 482-4900

HVAC Services We Offer in Richardson, TX

AC Repair: Same-day AC repair available throughout Richardson and the surrounding Dallas-Collin County area. We diagnose and repair all makes and models, and most calls are resolved in a single visit. When your air conditioning fails during a Texas summer, we treat it as the emergency it is.

AC Installation and Replacement: Richardson’s older homes are prime candidates for system replacement – an aging unit in a 1970s home working against original ductwork is costing you more every month than a properly sized new system would. We do a full load calculation, size the system correctly, and install it to manufacturer specs. All new installations come with up to a 10-year labor warranty.

Heating Repair and Installation: We service gas furnaces, heat pumps, and electric systems throughout Richardson. Older furnaces in Richardson’s established neighborhoods are one of the more common service calls we get – aging heat exchangers, worn igniters, and cracked flue pipes are all things we catch and repair before they become bigger problems.

HVAC Maintenance: Our Adon Care Club plan is $12 a month and covers two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Richardson homeowners with older systems, regular maintenance is the most cost-effective way to extend equipment life and catch problems early.

Ductless Mini-Split Systems: Older Richardson homes with additions, converted garages, or rooms that were never wired into the main duct system are good candidates for ductless mini-splits. We install single and multi-zone systems and they’re far more efficient than window units for spaces that need year-round comfort.

Heat Pumps: Heat pumps handle both heating and cooling from one system, and in Richardson’s climate – where winters are cold but rarely brutal – they’re a practical, efficient option. We install and service heat pumps throughout Richardson and can help you decide if one makes sense for your home.

Indoor Air Quality: Older Richardson homes can struggle with dust, allergens, and humidity issues that newer construction handles with tighter building envelopes. We offer air filtration systems, UV air purifiers, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Richardson area homeowners.

Duct Cleaning and Duct Repair: In a city with as much older housing stock as Richardson, ductwork is one of the first places we look when a system isn’t performing. Aging ducts leak conditioned air into attics and crawlspaces, drive up energy bills, and create uneven temperatures room to room. We inspect, clean, and seal ductwork throughout Richardson.

Why Richardson Homeowners Choose Adon Complete

Neighborhoods and Areas We Serve in Richardson, TX

We provide HVAC services throughout Richardson, including the neighborhoods near downtown Richardson, the UTD campus area, Canyon Creek, Breckinridge Park, and the commercial corridors along US-75 (Central Expressway) and Campbell Road. We also serve Richardson’s neighboring cities including Plano, Garland, Allen, and McKinney.

Schedule HVAC Service in RichardsonCall (903) 482-4900

Richardson, TX HVAC FAQ

How much does AC repair cost in Richardson, TX?

Most AC repairs in Richardson run between $150 and $600 depending on the type of repair. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs like a blower motor or evaporator coil cost more. We give you a clear estimate before any work begins – call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Richardson?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Richardson and the surrounding area. When you call after hours you reach a real person who can get a technician to your home fast.

My Richardson home is older and the AC can’t keep up. Is it worth repairing or should I replace it?

For older homes in Richardson, we look at a few things: the age of the system, the cost of the repair versus a replacement, and whether the existing ductwork is up to handling a new system efficiently. If a system is 15-plus years old and needs a major repair, replacement usually makes more sense. We give free estimates on replacements and honest second opinions on repair-versus-replace decisions.

What HVAC brands do you service in Richardson?

We service all makes and models including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer we have factory-trained expertise on those brands, but we don’t turn down a job because of what brand is on the equipment.

Do you handle commercial HVAC in Richardson?

Yes. Richardson’s Telecom Corridor and business parks are home to a lot of commercial office space, and we handle commercial HVAC service throughout the area. We work with offices, retail spaces, and light commercial properties, and maintenance agreements are available for businesses that want scheduled service and priority response.

Schedule HVAC Service in Richardson, TX Today

Whether you need same-day AC repair, a replacement on an aging system, or want to get on a maintenance plan, Adon Complete Air Conditioning and Heating is ready to help. Call us at (903) 482-4900 or click below to schedule. We also serve the surrounding communities of Plano, Garland, Allen, McKinney, and Wylie.

Schedule HVAC Service in RichardsonCall (903) 482-4900

Recent Jobs and Reviews in Richardson, TX

Rated 5.0 out of 5 stars based on 1 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Richardson, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Richardson, TX between April 2025 and July 2025.

The most recent job was on July 14, 2025.

Adon Complete Air Conditioning and Heating has completed 28 jobs in Richardson, TX in the last 12 months. The first job there was in May 2020.

Job Locations

Jacob P.
Jacob P.
Ductless system Estimate to install Mitsubishi Ductless Heat Pump Systems: of total Ductless capacity Outdoor: MUZ - GX24NL Indoor: MSZ - GX24NL Nominal Sound: 50-58 db Voltage: 208-230/60/1 Max Overcurrent Protection: 20 Liquid Line: 3/8" Gas Line: 5/8" Cooling Capacity: 24,000 Heating Capacity: 24,000 Wall Location: 24 BTU Ton Heat Pump system ROOM: high wall mount Air Handler (24,000 Btu) ********************************************************************************************************************* ****** Will be using existing materials ******** Copper Line Sets needed (based on measured feet from outdoor heat pump to indoor air handlers: Ductless Copper Line Sets include power cords: KIT18118 1 KIT; 1/4 X 3/8 X 25 DL 14G4W EZ WITH NUTS Line set cover outside on the cover Control wire from the outside unit to the inside unit and power ******************************************************************************************************************** Each indoor Air Ha
Richardson, TX 75081
Brayden W.
Brayden W.
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Rinsed condenser unit to promote heat exchange 16. Replaced and dated filters Found bacterial growth on ducts. Recommended duct cleaning to clean remove growth and improve indoor air quality.
Richardson, TX 75081
Brayden W.
Brayden W.
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Rinsed condenser unit to promote heat exchange 16. Replaced and dated filters Found low compressor cap on older unit. Cap is within range. Discussed with home owner and advised that this is something we will need to keep an eye on in the future. Blower wheel on older unit is pretty dirty, but amps are not outrageously excessive. Advised customer that this should be clea
Richardson, TX 75082
Shelby S.
Shelby S.
I installed the blower motor and a surge protector. I tested the system to ensure it is cooling. I discovered after repairing the unit that the drain is clogged. Customer did not want to move forward with clearing the drain at this time. WARR V/S BLOWER MTR/ SHIPPING/PAPERWORK ICM517 SINGLE PHASE SURGE PROTECTOR 120-240V NEMA TYPE 3 ENCLOSURE WITH LED STATUS LIGHTS SURGE PROTECTORS PROTECT SYSTEMS FROM SIGNIFICANT POWER FLUCTUATIONS.
Richardson, TX 75081
Brayden W.
Brayden W.
Performed a 1 system spring maintenance ( heat pump). Tasks performed. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked refrigerant pressures. 7. Checked compressor amp draw. 8. Checked condenser fan motor amp draw. 9. Inspected / replaced return filter. 10. Inspected return plenum for debris/ dirty. 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel. 13. Checked blower amp draw. 14. Measured temperature differential . 15. Inspected drain lines. 16. Washed condenser unit. 17. Tested contactor. Unit is in brand new condition, found no issues at this time.
Richardson, TX 75081
Cesar O.
Cesar O.
Performed a 2 system spring maintenance ( gas). Tasks performed. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked refrigerant pressures. 7. Checked compressor amp draw. 8. Checked condenser fan motor amp draw. 9. Inspected / replaced return filter. 10. Inspected return plenum for debris/ dirty,,,upstairs is dusty, recommended a duct cleaning. 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel. 13. Checked blower amp draw. 14. Measured temperature differential . 15. Inspected drain lines. 16. Washed condenser unit. 17. Tested contactor. Found no issues/ concerns at this time , units are cooling properly.
Richardson, TX 75082
Shelby S.
Shelby S.
On May 15th 2025, I returned and installed 2 more float switches and finished the maintenance. I checked amps, electrical, cleanliness, and refrigerant temperature. The systems are performing to manufacture specifications. Water safety switch designed to protect the home against water damage associated with drain line clogs.
Richardson, TX 75082
Shelby S.
Shelby S.
Total-C is a water soluble formulation, containing ingredients that produce a pleasant, fresh citrus scent and sludge eating bacteria, which eliminates the source of the odors and keeps your drains smelling fresh. A small amount goes a long way toward maintaining an odor free atmosphere that you and your family will appreciate! Performed 3 system cooling maintenance. I checked amps, filter, electrical, safeties, drains, cleanliness, refrigerant temperature, and temperature differential. The systems are performing inside of manufacture specifications. The customer ran out of drain treatment solution and purchased our total-c. Customer approved installing float switches on all the systems. I had one and installed it. I collected a deposit to cover the one float switch. We will need to come back to check 2 outdoor units with a can of bee spray and we will install the other switches when we return.
Richardson, TX 75082
Cesar O.
Cesar O.
Performed a 2 system spring maintenance ( gas). Tasks performed. 1. Visually inspected condenser coil for debris/ dirty,,,noticed both systems don’t have any surge protectors,,,highly recommended to install them to prevent any over current damage. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked refrigerant pressures. 7. Checked compressor amp draw. 8. Checked condenser fan motor amp draw. 9. Inspected / replaced return filter. 10. Inspected return plenum for debris/ dirty. 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel. 13. Checked blower amp draw. 14. Measured temperature differential . 15. Inspected drain lines,,,,emergency drain pan for the upstairs unit is getting rusted ,, highly recommended a pan treatment. 16. Washed condenser unit.
Richardson, TX 75080
Jacob P.
Jacob P.
I arrived at our clients home for a single system cooling maintenance inspection. I began by locating the equipment. Our client had recently replaced his air filter and did not need it changed today. I proceeded outside and put the outdoor condenser into test mode, it passed with zero faults found. I then proceeded to wash the outdoor coil and ensure it was clean for the remaining season. I then went inside and tested the blower motor. The motor did have high run amps but our client does use his unit to circulate air frequently in the home. I did also use TotalC down the drain line to help prevent any future clogging. The 7nit is running properly on departure.
Richardson, TX 75080

Your High Efficiency

Experts