Adon Complete Air Conditioning and Heating has been providing HVAC service in Sherman, TX, for years from our home base in Anna, just down Highway 75. Whether your AC goes out in July, your furnace won’t fire up in January, or you’re looking to upgrade to a more efficient system before the next season hits, our technicians are running calls in Sherman every week.
We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week for emergencies. Whether you’re in Heritage Ranch, Canyon Creek, Westwood Village, or one of the established neighborhoods near the Grayson County Courthouse, we know this area and we’re ready to help.
HVAC Services We Offer in Sherman
We handle everything heating and cooling for Sherman homeowners and businesses. Here’s what we do:
AC Repair. Same-day service available throughout Sherman and Grayson County. We diagnose and repair all makes and models, and the majority of our calls are resolved in a single visit.
AC Installation. When it’s time for a new system, we size it correctly using a proper load calculation and install it in accordance with the manufacturer’s specifications. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. It’s the smartest way to protect your system before the heat hits.
Mini-Split Installation. Ductless systems for rooms, additions, or whole-home comfort without ductwork. We install single- and multi-zone systems throughout Sherman and surrounding Grayson County communities.
Heat Pump Installation and Repair. Heat pumps provide both heating and cooling from a single system. This is a practical choice for Sherman homeowners who want year-round efficiency without separate units.
Indoor Air Quality. Air filtration systems, UV purifiers, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Sherman area homeowners.
Air Duct Cleaning. Professional duct cleaning removes allergens, dust, and debris from your system, improving air quality throughout your home.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Sherman and Grayson County.
Why Sherman Homeowners Choose Adon Complete
- We’re close by. We’re based in Anna, TX, a short drive down Highway 75. Our technicians are in Sherman neighborhoods regularly and know the homes and properties on both sides of US-75.
- Owner Jesse Villarreal has over 27 years of HVAC experience. When you call Adon Complete, you’re not calling a franchise call center. You’re calling a local company where the owner is actively involved and his reputation is on the line with every job.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. That means factory-trained installation and the full manufacturer warranty on every system we install. Not every HVAC contractor serving Sherman can say that.
- We service everything. Whatever brand you have, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. It’s the most affordable way to keep your system reliable year-round.
AC and Heating Service Throughout Sherman and Grayson County
We service every neighborhood in Sherman including Heritage Ranch, Westwood Village, Canyon Creek, Parkhaven, O’Hanlon Ranch, and the established neighborhoods around downtown and the Grayson County Courthouse area. We also serve the surrounding Grayson County communities of Denison, Van Alstyne, Gunter, Howe, Tom Bean, Pottsboro, and Whitesboro.
Sherman HVAC FAQ
Here are some common questions we get.
How much does AC repair cost in Sherman, TX?
Most AC repairs in Sherman run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs like a blower motor or evaporator coil replacement will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Sherman?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Sherman and Grayson County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC in a Sherman summer is not something that can wait until morning.
What HVAC brands do you service in Sherman?
We service all makes and models including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands specifically, but we won’t turn down a job because of the brand on the equipment.
Do you offer HVAC maintenance plans in Sherman?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. It’s the most affordable way to keep your system running reliably through Grayson County’s hot summers and cold winters.
What areas of Sherman do you serve?
We serve all of Sherman and the surrounding Grayson County communities including McKinney, Anna, Van Alstyne, Denison, Gunter, Howe, and Tom Bean.
Schedule HVAC Service in Sherman Today
Whether you need same-day AC repair, a new system installed, or just want to get on a maintenance plan before the heat hits, we’re ready to help. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Sherman, TX
Sherman, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Sherman, TX between July 2025 and August 2025.
The most recent job was on August 5, 2025.
Adon Complete Air Conditioning and Heating has completed 138 jobs in Sherman, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Preformed cooling maintenance. Tested all electrical components inside. All tested within manufacturer specifications. Treated drain lines with total C. Client changed filter the first of this month. Temperature split across the indoor coil was 20 degrees. 50 supply temperature and 70 return temperature. Client has uv stick inside unit that is in working order. I proceeded outside to test the electrical components and start and run amps of the fan and compressor motors. All electrical tested within manufacturer specifications. Fan run amps tested within manufacturer specifications range. Compressor start amps are starting higher than manufacturer specifications and could benefit from having a hard start kit installed to assist the compressor on the initial start up, run amps were testing within manufacturer specifications range. Provided estimate for the hard start kit. Rinsed outdoor coil. Unit was cooling upon departure 521 ELECTRONIC HARD START 189-227 UF 170-277V 1 HP AND UP HAR
I arrived to the unit not cooling properly. I immediately began at the thermostat and our client had the power off. I began diagnosing the low voltage wiring and found it to be different than the pictures recorded during the QC completed in June. I let our client know that the wiring had been changed and it would be best to rewrite the thermostat to allow for proper function. He agreed and I began to run new thermostat wire. I had mistakenly cut the wire in the process of running new wire which caused a delay. I was finally able to run and wire the thermostat, furnace, and outdoor unit properly. Once wired our client elected to change the thermostat himself and we tested the unit. It ran in cooling without any issues.
Preformed cooling maintenance on single system Trane variable speed manufacture year is 2020. Tested inside electrical components all tested within manufacturer specifications. Treated drain lines with total c. Drain line had some sludge build up inside. Provided estimate to have drain line cleared. Changed filter 20 x25x4. Temp split across the coils is 17 degrees. Proceeded outside to check electrical components run and start amps. All tested within manufacturer specifications range. Rinsed outdoor coil. Unit was Cooling upon departure.
Returned to our clients h9me to further diagnose mini split issue. Our client educated us that this problem started almost immediately after install and has since been having various issues. The outside equipment is rated for 24k btu with three separate heads. The furthest unit head is about 50ft and the second is about 35 and the closest is about 10feet. In the manual that the homeowner had I was able to find the disclaimer that stated the max line set length should not exceed 65ft. Due to this disclaimer it would explain why the unit has never ran properly from the initial install. The compressor does not have the capacity to run the furthest unit and is probably flooded with refrigerant when trying to operate the closest indoor unit. We also found various issues such as exposed high voltage wire, “pig tail” line set outside, and spliced indoor line set. Initially I suggested that we could recover the refrigerant and put in a fresh charge of Freon. But after further evaluation of
Found second stage cooling was not properly wired. It was engaging 1 leg of the emergency strip heat. I wired the low voltage wire correctly and proceeded to test the unit in second stage. It ran properly cooling with 18° drop. I then took it out of test mode and ran the unit normally and waited unit it ran in second stage on its own. I verified the unit was cooling properly on departure.
Preformed spray pant sealant installation on emergency drain pan for client. Cut secondary drain line to be able to remove the pan to preform work. Added coupling to drain line and connected back together with p c glue. Unit was cooling upon departure.
Provided client with courtesy call prior to arrival to confirm appointment and verify address. - Return trip to perform recommended repairs.(Warranty Contactor) (Maintenance just performed in April 2025. - Replaced Contactor.. double checked all wiring. - water rinsed condenser coils. - recalibrated touch screen for thermostat and assisted homeowner in connecting thermostat to Wi-Fi - Homeowner mentioned her filter needed replacement and had one available so technician went ahead and installed - provided a demand call for cooling to test system - system cooling/draining/functioning properly upon departure.
System replacement Move system Total ductwork replacement 13 supply 4 Returns Master bed Bed 1 Bed 2 Hallway The price is being provided is a cash price. We need to have a check or cash in hand. If Customer uses a credit card will be a 4% fee
Retuned to home to measure the temperature drop at the indoor unit. I measured a perfect 20° drop from the return to supply. I did also take some foil tape and sealed the evaporator coil to the supply plenum box. There was a small air gap. No issues and the unit is cooling properly on departure.
Estimate Summary: Trane Warranty Compressor Replacement Scope of Work: - Replace compressor under Trane parts warranty. - Includes removal of failed compressor, installation of new unit, system evacuation, and refrigerant recharge. Customer Responsibility: - Labor, refrigerant, and a liquid line dryer are not covered under warranty and will be billed separately. - A $500 deposit is required to order and secure the replacement compressor. Notes: - Final refrigerant charge will be based on system requirements. - Any additional needs or issues discovered during repair will be communicated and quoted before proceeding.

