Menu

Heating and Air Conditioning Services in Sherman, TX

Adon Complete Air Conditioning and Heating has been providing HVAC service in Sherman, TX, for years from our home base in Anna, just down Highway 75. Whether your AC goes out in July, your furnace won’t fire up in January, or you’re looking to upgrade to a more efficient system before the next season hits, our technicians are running calls in Sherman every week.

We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week for emergencies. Whether you’re in Heritage Ranch, Canyon Creek, Westwood Village, or one of the established neighborhoods near the Grayson County Courthouse, we know this area and we’re ready to help.

Schedule Service in ShermanCall (903) 482-4900

HVAC Services We Offer in Sherman

We handle everything heating and cooling for Sherman homeowners and businesses. Here’s what we do:

AC Repair. Same-day service available throughout Sherman and Grayson County. We diagnose and repair all makes and models, and the majority of our calls are resolved in a single visit.

AC Installation. When it’s time for a new system, we size it correctly using a proper load calculation and install it in accordance with the manufacturer’s specifications. All new installations come with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. It’s the smartest way to protect your system before the heat hits.

Mini-Split Installation. Ductless systems for rooms, additions, or whole-home comfort without ductwork. We install single- and multi-zone systems throughout Sherman and surrounding Grayson County communities.

Heat Pump Installation and Repair. Heat pumps provide both heating and cooling from a single system. This is a practical choice for Sherman homeowners who want year-round efficiency without separate units.

Indoor Air Quality. Air filtration systems, UV purifiers, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Sherman area homeowners.

Air Duct Cleaning. Professional duct cleaning removes allergens, dust, and debris from your system, improving air quality throughout your home.

Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Sherman and Grayson County.

Why Sherman Homeowners Choose Adon Complete

AC and Heating Service Throughout Sherman and Grayson County

We service every neighborhood in Sherman including Heritage Ranch, Westwood Village, Canyon Creek, Parkhaven, O’Hanlon Ranch, and the established neighborhoods around downtown and the Grayson County Courthouse area. We also serve the surrounding Grayson County communities of Denison, Van Alstyne, Gunter, Howe, Tom Bean, Pottsboro, and Whitesboro.

Schedule Service in ShermanCall (903) 482-4900

Sherman HVAC FAQ

Here are some common questions we get.

How much does AC repair cost in Sherman, TX?

Most AC repairs in Sherman run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs like a blower motor or evaporator coil replacement will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Sherman?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Sherman and Grayson County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC in a Sherman summer is not something that can wait until morning.

What HVAC brands do you service in Sherman?

We service all makes and models including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands specifically, but we won’t turn down a job because of the brand on the equipment.

Do you offer HVAC maintenance plans in Sherman?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. It’s the most affordable way to keep your system running reliably through Grayson County’s hot summers and cold winters.

What areas of Sherman do you serve?

We serve all of Sherman and the surrounding Grayson County communities including McKinney, Anna, Van Alstyne, Denison, Gunter, Howe, and Tom Bean.

Schedule HVAC Service in Sherman Today

Whether you need same-day AC repair, a new system installed, or just want to get on a maintenance plan before the heat hits, we’re ready to help. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in ShermanCall (903) 482-4900

Recent Jobs and Reviews in Sherman, TX

Rated 5.0 out of 5 stars based on 19 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Sherman, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Sherman, TX in July 2026.

The most recent job was on July 21, 2026.

Adon Complete Air Conditioning and Heating has completed 138 jobs in Sherman, TX in the last 12 months. The first job there was in March 2020.

Job Locations

Skylar M.
Skylar M.
No cool on main system. Customer stated it was not keeping up with temperature set at thermostat. System was running but air coming out was not cold. Checked refrigerant pressures and they are very low. Performed leak search and found refrigerant leak in evaporator coil. R-22 system, it will need to be replaced.
Sherman, TX 75092
Sherman, TX - No cool on main system. Customer stated it was not keeping up with temperature set at thermostat. System was running but air coming out was not cold. Checked refrigerant pressures and they are very low. Performed leak search and found refrigerant leak in evaporator coil. R-22 system, it will need to be replaced.
Sherman, TX - No cool on main system. Customer stated it was not keeping up with temperature set at thermostat. System was running but air coming out was not cold. Checked refrigerant pressures and they are very low. Performed leak search and found refrigerant leak in evaporator coil. R-22 system, it will need to be replaced.
Skylar M.
Skylar M.
Removed faulty blower motor from housing. Installed new motor u set parts and labor warranty. Installed it back into the system and tested operation. Set system to cool and measured temperature split across coil. 89° return and 68° supply. System is cooling at this time.
Sherman, TX 75090
Sherman, TX - Removed faulty blower motor from housing. Installed new motor u set parts and labor warranty. Installed it back into the system and tested operation. Set system to cool and measured temperature split across coil. 89° return and 68° supply. System is cooling at this time.
Sherman, TX - Removed faulty blower motor from housing. Installed new motor u set parts and labor warranty. Installed it back into the system and tested operation. Set system to cool and measured temperature split across coil. 89° return and 68° supply. System is cooling at this time.
Skylar M.
Skylar M.
Arrive for no cool. Connected to system using cool cloud app. System had multiple blower motor faults. Set thermostat to cool. Condenser came on as it should but blower motor would only run for a couple seconds and then shut off. Motor is partially seized up. Blower motor will need to be replaced.
Sherman, TX 75090
Sherman, TX - Arrive for no cool. Connected to system using cool cloud app. System had multiple blower motor faults. Set thermostat to cool. Condenser came on as it should but blower motor would only run for a couple seconds and then shut off. Motor is partially seized up. Blower motor will need to be replaced.
Clayton P.
Clayton P.
Upon arrival I found that system is not cooling properly. I found that system is 28 years old and an R 22 system. Are you refrigerant pressures were telling me that the system is low on refrigerant so there must be a leak either in the condenser or evaporator coil. Due to the age and refrigerant type of the system, I recommend a full system replacement. Our comfort advisor will be reaching out to landlord for options.
Sherman, TX 75092
Sherman, TX - Upon arrival I found that system is not cooling properly. I found that system is 28 years old and an R 22 system. Are you refrigerant pressures were telling me that the system is low on refrigerant so there must be a leak either in the condenser or evaporator coil. Due to the age and refrigerant type of the system, I recommend a full system replacement. Our comfort advisor will be reaching out to landlord for options.
Sherman, TX - Upon arrival I found that system is not cooling properly. I found that system is 28 years old and an R 22 system. Are you refrigerant pressures were telling me that the system is low on refrigerant so there must be a leak either in the condenser or evaporator coil. Due to the age and refrigerant type of the system, I recommend a full system replacement. Our comfort advisor will be reaching out to landlord for options.
Shelby S.
Shelby S.
Upon arrival, I invested reasons for a smell to be produced on a system that is from 2024(only in service for 1 year). The system is zoned. The ducts are mostly designed right for optimal airflow. The fresh air seems to run frequently. I unplugged it to reduce the amount of hot summer air meeting the cooling indoor air. I advised an air scrubber be added into the system to help with smells and treat the air.
Sherman, TX 75090
Sherman, TX - Upon arrival, I invested reasons for a smell to be produced on a system that is from 2024(only in service for 1 year). The system is zoned. The ducts are mostly designed right for optimal airflow. The fresh air seems to run frequently. I unplugged it to reduce the amount of hot summer air meeting the cooling indoor air. I advised an air scrubber be added into the system to help with smells and treat the air.
Sherman, TX - Upon arrival, I invested reasons for a smell to be produced on a system that is from 2024(only in service for 1 year). The system is zoned. The ducts are mostly designed right for optimal airflow. The fresh air seems to run frequently. I unplugged it to reduce the amount of hot summer air meeting the cooling indoor air. I advised an air scrubber be added into the system to help with smells and treat the air.
Jesse V.
Jesse V.
Upon inspection, the condensate drain line was found to be clogged, preventing proper condensate drainage. The safety float switch is shutting the system down to protect the equipment from potential water overflow and damage, causing the outdoor condensing unit to turn off. Our service will include: • Purging the condensate drain line to remove the blockage. • Flushing the drain line thoroughly to restore proper drainage. • Verifying the condensate flows freely through the drain system. • Testing the condensate safety float switch to ensure it is operating correctly. • Running the HVAC system through a complete operational test to verify normal system operation after the drain line has been cleared. Once the condensate drain line has been properly cleaned and flushed, the system should operate normally, allowing the outdoor unit to run without interruption.
Sherman, TX 75090
Clayton P.
Clayton P.
Found that side panel was open. I put 5/16 screws in panel and found that screw holes were stripped out, panel popped back open. I used self tapping screws and made new holes. Panel is now secure.
Sherman, TX 75090
Sherman, TX - Found that side panel was open. I put 5/16 screws in panel and found that screw holes were stripped out, panel popped back open.

I used self tapping screws and made new holes. Panel is now secure.
Clayton P.
Clayton P.
Upon arrival I found the emergency drain pan was full of water. Float switch was tripped so I cleaned out drains and vacuumed out all of the water. Tested drain line with a gallon of water system is draining. When thermostat came back on, I turned system to cooling and noticed that the outdoor unit was running, but the indoor blower was not coming on upon further investigation. I found that the breaker in the breaker panel was tripped not allowing the blower motor to come on I set breaker and panel and system system came on. System is running properly at this time. I let staff know that they may need to get an electrician to take a look at that weak breaker.
Sherman, TX 75090
Sherman, TX - Upon arrival I found the emergency drain pan was full of water. Float switch was tripped so I cleaned out drains and vacuumed out all of the water. Tested drain line with a gallon of water system is draining. When thermostat came back on, I turned system to cooling and noticed that the outdoor unit was running, but the indoor blower was not coming on upon further investigation. I found that the breaker in the breaker panel was tripped not allowing the blower motor to come on I set breaker and panel and system system came on. System is running properly at this time. I let staff know that they may need to get an electrician to take a look at that weak breaker.
Sherman, TX - Upon arrival I found the emergency drain pan was full of water. Float switch was tripped so I cleaned out drains and vacuumed out all of the water. Tested drain line with a gallon of water system is draining. When thermostat came back on, I turned system to cooling and noticed that the outdoor unit was running, but the indoor blower was not coming on upon further investigation. I found that the breaker in the breaker panel was tripped not allowing the blower motor to come on I set breaker and panel and system system came on. System is running properly at this time. I let staff know that they may need to get an electrician to take a look at that weak breaker.
Clayton P.
Clayton P.
Upon completion of my thorough evaluation when I was testing the drain lines with with water, it was starting to back up in the funnel and was drain but extremely slow. This indicates a the drain line being almost fully clogged. Also there is no blow out valve. By adding the blow out valve it allows for easier access to clear the line. CLEAR DRAIN BLOCK - USING NITROGEN ONLY LEVEL 2 CONDENSATE DRAIN LINES NEED TO BE CLEANED OR THEY CAN CLOG WITH ALGAE AND DEBRIS Includes shop vacuuming when necessary. Also installation of a Quickblast PVC fitting, which improves accessibility for future maintenance.
Sherman, TX 75090
Sherman, TX - Upon completion of my thorough evaluation when I was testing the drain lines with with water, it was starting to back up in the funnel and was drain but extremely slow. This indicates a the drain line being almost fully clogged. Also there is no blow out valve. By adding the blow out valve it allows for easier access to clear the line. 

CLEAR DRAIN BLOCK - USING NITROGEN ONLY LEVEL 2

CONDENSATE DRAIN LINES NEED TO BE CLEANED OR THEY CAN CLOG WITH ALGAE AND DEBRIS

Includes shop vacuuming when necessary.

Also installation of a Quickblast PVC fitting, which improves accessibility for future maintenance.
Shelby S.
Shelby S.
Upon arrival, I observed where the water was dripping from. The drain line is not clogged. The only way water could be produce is from the hot attic air reaching the metal duct. Jesse suggested increasing the blower speed. With the trane app, we increased it from 50 to 70. Customer is going to monitor over the weekend and report what he is experiencing.
Sherman, TX 75092

Your High Efficiency

Experts