Adon Complete Air Conditioning and Heating has been providing HVAC service in Sherman, TX, for years from our home base in Anna, just down Highway 75. Whether your AC goes out in July, your furnace won’t fire up in January, or you’re looking to upgrade to a more efficient system before the next season hits, our technicians are running calls in Sherman every week.
We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week for emergencies. Whether you’re in Heritage Ranch, Canyon Creek, Westwood Village, or one of the established neighborhoods near the Grayson County Courthouse, we know this area and we’re ready to help.
HVAC Services We Offer in Sherman
We handle everything heating and cooling for Sherman homeowners and businesses. Here’s what we do:
AC Repair. Same-day service available throughout Sherman and Grayson County. We diagnose and repair all makes and models, and the majority of our calls are resolved in a single visit.
AC Installation. When it’s time for a new system, we size it correctly using a proper load calculation and install it in accordance with the manufacturer’s specifications. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. It’s the smartest way to protect your system before the heat hits.
Mini-Split Installation. Ductless systems for rooms, additions, or whole-home comfort without ductwork. We install single- and multi-zone systems throughout Sherman and surrounding Grayson County communities.
Heat Pump Installation and Repair. Heat pumps provide both heating and cooling from a single system. This is a practical choice for Sherman homeowners who want year-round efficiency without separate units.
Indoor Air Quality. Air filtration systems, UV purifiers, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Sherman area homeowners.
Air Duct Cleaning. Professional duct cleaning removes allergens, dust, and debris from your system, improving air quality throughout your home.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Sherman and Grayson County.
Why Sherman Homeowners Choose Adon Complete
- We’re close by. We’re based in Anna, TX, a short drive down Highway 75. Our technicians are in Sherman neighborhoods regularly and know the homes and properties on both sides of US-75.
- Owner Jesse Villarreal has over 27 years of HVAC experience. When you call Adon Complete, you’re not calling a franchise call center. You’re calling a local company where the owner is actively involved and his reputation is on the line with every job.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. That means factory-trained installation and the full manufacturer warranty on every system we install. Not every HVAC contractor serving Sherman can say that.
- We service everything. Whatever brand you have, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. It’s the most affordable way to keep your system reliable year-round.
AC and Heating Service Throughout Sherman and Grayson County
We service every neighborhood in Sherman including Heritage Ranch, Westwood Village, Canyon Creek, Parkhaven, O’Hanlon Ranch, and the established neighborhoods around downtown and the Grayson County Courthouse area. We also serve the surrounding Grayson County communities of Denison, Van Alstyne, Gunter, Howe, Tom Bean, Pottsboro, and Whitesboro.
Sherman HVAC FAQ
Here are some common questions we get.
How much does AC repair cost in Sherman, TX?
Most AC repairs in Sherman run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs like a blower motor or evaporator coil replacement will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Sherman?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Sherman and Grayson County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC in a Sherman summer is not something that can wait until morning.
What HVAC brands do you service in Sherman?
We service all makes and models including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands specifically, but we won’t turn down a job because of the brand on the equipment.
Do you offer HVAC maintenance plans in Sherman?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. It’s the most affordable way to keep your system running reliably through Grayson County’s hot summers and cold winters.
What areas of Sherman do you serve?
We serve all of Sherman and the surrounding Grayson County communities including McKinney, Anna, Van Alstyne, Denison, Gunter, Howe, and Tom Bean.
Schedule HVAC Service in Sherman Today
Whether you need same-day AC repair, a new system installed, or just want to get on a maintenance plan before the heat hits, we’re ready to help. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Sherman, TX
Sherman, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Sherman, TX between June 2026 and July 2026.
The most recent job was on July 2, 2026.
Adon Complete Air Conditioning and Heating has completed 138 jobs in Sherman, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Upon arrival, I found that 24v wire at the condenser not connected. The roofing contractor informed me that a shingle fell and landed on it. This caused the fuse to pop in the attic. I connected the wiring and replaced the fuse. The system came on and began cooling again. The system is R32 refrigerant from 2025.
Scope of Work – Condensate Drain Line Cleaning Upon inspection, the condensate drain line was found to be clogged, preventing proper condensate drainage. The safety float switch is shutting the system down to protect the equipment from potential water overflow and damage, causing the outdoor condensing unit to turn off. Our service will include: • Purging the condensate drain line to remove the blockage. • Flushing the drain line thoroughly to restore proper drainage. • Verifying the condensate flows freely through the drain system. • Testing the condensate safety float switch to ensure it is operating correctly. • Running the HVAC system through a complete operational test to verify normal system operation after the drain line has been cleared. Once the condensate drain line has been properly cleaned and flushed, the system should operate normally, allowing the outdoor unit to run without interruption. We also picked up the window unit
Service Summary – Miss Lowe’s Residence Performed a thorough diagnostic evaluation of the HVAC system after the customer reported operational concerns. During the inspection, it was determined that the primary condensate drain safety switch had become clogged, preventing the outdoor condenser from operating properly. The condensate drain line was found to be heavily restricted. The following corrective actions were completed: • Cleared and flushed the primary condensate drain line. • Tested the drain with several gallons of water to verify proper drainage. • Treated the drain line with Total C to help reduce future buildup and maintain proper condensate flow. • Verified normal operation of the condensate safety switch after cleaning. Additionally, a full refrigerant performance evaluation was performed using manifold gauges. System pressures were observed to fluctuate, which is consistent with the customer’s reported performance concerns. Recommendation: Based on today’s findin
The drain was full of zoogloea algae causing water to divert to the emergency drain pan. I received approval to do what I needed to do address the issue with minimal additional water damage. I had to remove 10 gallons of water (2 loads of a 5 gallon bucket) and clear the drain. System is draining and ptrap is primed upon departure.
This is to perform a short wire run to install a thermostat near the unit and install a sensor in the main living area. This will allow us to make the sensor the dominant reading to control the cooling in the house. The thermostat comes with a 10 year parts warranty. - algae stick - surge protector
Upon arrival, I found the system operational and cooling. I hooked up my gauges to find the pressures jumping around with a piston indicating that there is contamination in the refrigerant lines. I provided a price to address this issue. Signs to watch for: minor freezing at the coil in the attic or outside at the system on the copper lines or the outdoor not operating
Upon arrival, I found the found that the outdoor unit was turned off. I investigated the wiring of the outdoor unit it. Client has replaced the condenser fan motor and capacitor himself. The wiring was incorrect on the capacitor. I fixed it and attempted to start the system. The equipment comes on and will try to cool. The system is low on R22 refrigerant. I spoke with the client about the issues I came across. Client opted to have our comfort specialist come on 6/30/2026 at 8-10am to go over replacement options.
Ajustes blower.
Quote Summary - Blower Motor Replacement Scope of Work • Remove failed blower motor from existing HVAC system • Install replacement blower motor (OEM or universal option available) • Verify proper motor wiring, configuration, and operation • Test blower operation and system airflow to confirm proper performance Diagnosis Findings • Customer reported system freezing concerns • Refrigerant pressures were checked and found to be within normal standing range • Tested system operation and found indoor blower motor was not operating • Verified high voltage and control voltage were present at the motor • Attempted alternate motor speed settings with no change in operation • Testing confirmed the blower motor control module has failed and the motor requires replacement Materials & Equipment • Replacement blower motor (OEM or universal option) • Installation materials and wiring connections as needed Special Notes • Estimate includes option for either OEM replacement motor or universal repl
Did not complete condenser chemical cleaning. Neighbor stated unit was freezing up. Measured refrigerant pressures and found them to be good standing pressures. Tested unit in cool and found blower motor was not coming on. Measured high voltage and control voltage to the motor and found no issues there. Attempted switching motor to different speed and motor would still not come on. This confirms motor control module has failed and motor will need to be replaced. OEM motor will not arrive until next week. Advised homeowner we could try to find an OEM motor, but we would have to update her on pricing once we find a compatible motor. System shut down at outdoor breaker to prevent damage to the system.

