Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in May 2026.
The most recent job was on May 13, 2026.
Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
I performed a single cooling maintenance on a 2017 heat pump system. During my thorough evaluation, I checked amps, capacitors, filters, electrical, cleanliness, drains, and performance. I determined the system needs cleanings on the outdoor unit and evaporator coil. These coils become oxidized and reduce the performance. I discovered that the blower wheel bearings are worn out and the motor will likely seize up soon. The contactor is emitting a loud buzzing noise and has visual burning present. Customer asked about redesigning the air conditioning entirely. We scheduled for our engineer to come out onsite and go over designing. Scheduled for Monday 5/18 at 8am.
Provided duct cleaning estimate for client. The system is from 2011, zoned. The system does have dust present in the duct work, blower wheel and plenum boxes. By having the system fully cleaned it can help with the air quality of the home. The current filter being used is a 20x20x4 merv 13 box filter. While this is a good filter to use, the filter still allows for dust to get around the filter and on to the major components and duct work. By having this upgraded to an aprilaire filter it will help improve air quality and keep the system cleaner.
I performed a single cooling maintenance on a 2020 gas system. I cueck3d amps, capacitors, filter, electrical, drains, and cleanliness. During my thorough evaluation, I discovered that the evaporator coil, condensing coil, and ducts needs cleaning. There is a crushed return duct and needs 4’ of 7” duct to fix it correctly. The outdoor capacitor failed testing and customer wants to wait until complete failure to repair. The customer wants to wait to do the second surge protector. I installed the outdoor sure protected during the maintenance visit today and collected a none refundable deposit for the sold job. Customer would like us to do the duct repair 5/18 at 10am.
Upon arrival outside unit was not running while given a call for cooling. I verified power to the unit and contactor is pulling in all low voltage power is present. I checked voltage at the disconnect to find it to only be giving a reading of 111volts from the breaker panel inside. Client will need an electrician to come out and fix power to the unit.
Completed two system maintenance on two Goodman gas systems. On he down stairs system i tested all electrical components on the inside unit. All tested within manufacturer specifications. I changed the filter for the client. 20x25x4. I treated and tested drain lines with water and total c. I proceeded outside where I found the outdoor compressor not running, I tested all electrical components and all tested within manufacturer specifications. I placed my gauges onto the unit and found that there was zero refrigerant in the system, indicating a leak. On the upstairs unit I tested all electrical in the attic unit. All tested within manufacturer specifications. I treated and tested the drain lines with totalc and water. I changed the filter for the client. 16x25x4. I proceeded outside where I tested all electrical components. The capacitor is failing at 40/45 mfd and needs to be replaced. All other electrical components tested within manufacturer specifications.
Perform maintenance on 2023 Lennox furnace. 1. Visually inspected condenser coil for leaks and abnormalities. 2. Inspected condenser fan motor, blades and bearings. 3. Inspected, cleaned, and, tightened wiring connections. 4. Measured capacitance of compressor/fan motor capacitor. 5. Inspected and measured resistance of contactor 6. Measured compressor current draw. 7. Measured condenser fan motor amp draw. 8. Inspected and replaced return filter. 9. Inspected return plenum for dust or debris. 10. Inspected evaporator coil for cleanliness and oxidation. 11. Inspected blower motor/ blower wheel for dust and debris 12. Measured blower motor current draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested drain lines for proper drainage and treated to prevent blockages. 15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. Found outdoor condenser, extremely dirty and matted with debri
Upon arrival, I discovered that the system was fully operational. I observed that the emergency pan has sustained some serious water damage prompting me to check my refrigerant charge. After checking the refrigerant charge, I determined that the system has a refrigerant leak. I performed a quick visual inspection of the usual areas a leak happens. I discovered a substantial amount of oil in the evaporator coil primary pan. This indicated that there is a leak in the evaporator coil. I checked warranty on the equipment, and I discovered that the warranty expired due to it being not the original homeowner. I provided options from patches to permanent repair options. Customer elected to schedule for our comfort specialist to come out on Wednesday between 8am - 9am. I shut the outdoor unit off to prevent further damage to the equipment.
Installed Jv1 blowout valve and cleared drain line. Added algae stick to coil drain pan to help prevent future clogs.
Preformed single system cooling maintenance on a 2024 heat pump. I tested all electrical on the inside unit all tested within manufacturer specifications. I treated and flushed drain lines with total c and water I did notice the drain line for the main drain was backing up but that is after the HVAC drain lines and will need a plumber to look at. The filter that was being used was a honeywell 20x25x4 box filter. The correct filter that needs to be used is the aprilaire 210 filter. I tested the outside units electrical components and all tested within manufacturer specificcations. I was unable to rinse the outside unit with water at today's visit due to not having correct water access at the spicket. My hose would not connect to it. Unit was cooling upon departure.
Client stated dryer was detecting a clogged vent. Upon inspection I found the vent on the roof to be caked with dryer vent. I cleared lent from vent opening and tested. All is working properly.

