Menu

Heating and Air Conditioning Services in Anna, TX

Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.

Schedule Service in AnnaCall (903) 482-4900

HVAC Services in Anna, TX

Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:

AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.

AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.

Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.

Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.

Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.

Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.

Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.

HVAC Services for Anna’s Growing Neighborhoods

Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.

For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.

Why Anna Homeowners Choose Adon Complete

Schedule Service in AnnaCall (903) 482-4900

Frequently Asked Questions

Here are some answers to common questions we get about our Anna HVAC services.

How much does AC repair cost in Anna, TX?

Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Anna?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.

What HVAC brands do you service in Anna?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.

Do you offer HVAC maintenance plans in Anna?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.

What areas near Anna do you serve?

We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.

Schedule HVAC Service in Anna Today

We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in AnnaCall (903) 482-4900

Recent Jobs and Reviews in Anna, TX

Rated 4.9 out of 5 stars based on 67 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Anna, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX between April 2026 and May 2026.

The most recent job was on May 1, 2026.

Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.

Job Locations

Matthew C.
Matthew C.
Upon completion of my thorough evaluation on a 2013 goodman heat pump. I found that the evaporator coil could benefit from having a deep cleaning done on it. I tested all the electrical components on the inside unit. All tested within manufacturer specifications. Client did not have a filter for me to change at the time of inspection. 20x20x1. I tested and flushed the drain line with total c and water. I proceeded outside where I tested all electric components on the outside unit. All tested within manufacturer specification range. The 45/5 capacitor was testing on the lower end of the range. 42/45. I rinsed the outdoor unit with water at today's visit. Unit was cooling upon departure.
Anna, TX 75409
Anna, TX - Upon completion of my thorough evaluation on a 2013 goodman heat pump. I found that the evaporator coil could benefit from having a deep cleaning done on it. I tested all the electrical components on the inside unit. All tested within manufacturer specifications. Client did not have a filter for me to change at the time of inspection. 20x20x1. I tested and flushed the drain line with total c and water. I proceeded outside where I tested all electric components on the outside unit. All tested within manufacturer specification range. The 45/5 capacitor was testing on the lower end of the range. 42/45. I rinsed the outdoor unit with water at today's visit. Unit was cooling upon departure.
Anna, TX - Upon completion of my thorough evaluation on a 2013 goodman heat pump. I found that the evaporator coil could benefit from having a deep cleaning done on it. I tested all the electrical components on the inside unit. All tested within manufacturer specifications. Client did not have a filter for me to change at the time of inspection. 20x20x1. I tested and flushed the drain line with total c and water. I proceeded outside where I tested all electric components on the outside unit. All tested within manufacturer specification range. The 45/5 capacitor was testing on the lower end of the range. 42/45. I rinsed the outdoor unit with water at today's visit. Unit was cooling upon departure.
Brayden W.
Brayden W.
Found drain pan full of water. Performed initial test on outdoor unit and found outdoor unit running and suction line was getting cold. I did not want to run the unit for very long as the indoor unit was full of water and I did not want to send water all over the place. Tested drain line from service port and found it to be draining. However when I tested the drain line from the primary drain pan from inside the unit I found it to not be draining sufficiently and water was pouring out of the secondary drain line into the emergency drain pan. This confirms there is a blockage in between the drain line and primary drain pan. I could not clear the blockage with my hand so the only option is to cut the line and install a blowout valve in order to blow nitrogen back into the main coil pan and repeatedly flush with water. Performed drain line clearing blowing the line out both directions and flushing with gallons of water to remove debris knocked loose in the line. Drain line was found to
Anna, TX 75409
Anna, TX - Found drain pan full of water. Performed initial test on outdoor unit and found outdoor unit running and suction line was getting cold. I did not want to run the unit for very long as the indoor unit was full of water and I did not want to send water all over the place. Tested drain line from service port and found it to be draining. However when I tested the drain line from the primary drain pan from inside the unit I found it to not be draining sufficiently and water was pouring out of the secondary drain line into the emergency drain pan. This confirms there is a blockage in between the drain line and primary drain pan. I could not clear the blockage with my hand so the only option is to cut the line and install a blowout valve in order to blow nitrogen back into the main coil pan and repeatedly flush with water. 

Performed drain line clearing blowing the line out both directions and flushing with gallons of water to remove debris knocked loose in the line. Drain line was found to
Anna, TX - Found drain pan full of water. Performed initial test on outdoor unit and found outdoor unit running and suction line was getting cold. I did not want to run the unit for very long as the indoor unit was full of water and I did not want to send water all over the place. Tested drain line from service port and found it to be draining. However when I tested the drain line from the primary drain pan from inside the unit I found it to not be draining sufficiently and water was pouring out of the secondary drain line into the emergency drain pan. This confirms there is a blockage in between the drain line and primary drain pan. I could not clear the blockage with my hand so the only option is to cut the line and install a blowout valve in order to blow nitrogen back into the main coil pan and repeatedly flush with water. 

Performed drain line clearing blowing the line out both directions and flushing with gallons of water to remove debris knocked loose in the line. Drain line was found to
Brayden W.
Brayden W.
1. Visually inspected condenser coil for leaks and abnormalities. 2. Inspected condenser fan motor, blades and bearings. 3. Inspected, cleaned, and, tightened wiring connections. 4. Measured capacitance of compressor/fan motor capacitor. 5. Inspected and measured resistance of contactor 6. Measured compressor current draw. 7. Measured condenser fan motor amp draw. 8. Inspected and replaced return filter. 9. Inspected return plenum for dust or debris. 10. Inspected evaporator coil for cleanliness and oxidation. 11. Inspected blower motor/ blower wheel for dust and debris 12. Measured blower motor current draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested drain lines for proper drainage and treated to prevent blockages. 15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. Found capacitor testing outside of manufacturer specifications. Advised homeowner that capacitor could fail
Anna, TX 75409
Anna, TX - 1. Visually inspected condenser coil for leaks and abnormalities.
2. Inspected condenser fan motor, blades and bearings.
3. Inspected, cleaned, and, tightened wiring connections.
4. Measured capacitance of  compressor/fan motor capacitor.
5. Inspected and measured resistance of contactor
6. Measured compressor current draw.
7. Measured condenser fan motor amp draw.
8. Inspected and replaced return filter.
9. Inspected return plenum for dust or debris.
10. Inspected evaporator coil for cleanliness and oxidation.
11. Inspected blower motor/ blower wheel for dust and debris
12. Measured blower motor current draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested drain lines for proper drainage and treated to prevent blockages.
15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris.

Found capacitor testing outside of manufacturer specifications. Advised homeowner that capacitor could fail
Anna, TX - 1. Visually inspected condenser coil for leaks and abnormalities.
2. Inspected condenser fan motor, blades and bearings.
3. Inspected, cleaned, and, tightened wiring connections.
4. Measured capacitance of  compressor/fan motor capacitor.
5. Inspected and measured resistance of contactor
6. Measured compressor current draw.
7. Measured condenser fan motor amp draw.
8. Inspected and replaced return filter.
9. Inspected return plenum for dust or debris.
10. Inspected evaporator coil for cleanliness and oxidation.
11. Inspected blower motor/ blower wheel for dust and debris
12. Measured blower motor current draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested drain lines for proper drainage and treated to prevent blockages.
15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris.

Found capacitor testing outside of manufacturer specifications. Advised homeowner that capacitor could fail
Brayden W.
Brayden W.
Homeowner was not present at arrival and I proceeded to check outdoor unit with permission from the homeowner. Disassembled outdoor condenser to look for leaks and found no evidence of a leak. Checked condenser fins, coil loops, and valve cores. Homeowner arrived at the property and let me inside to check evaporator coil. Found seals broken and coil door lightly secured. Proceeded to perform electronic leak test on coils and got hits of refrigerant consistently near loop video included. This confirms the leak is here in the evaporator coil. Provided options to the homeowner for changing the coil out and partial system replacement. Coil replacement would include replacement of TXV and liquid line filter dryer as is standard with replacement. Advised homeowner refrigerant is priced by the pound and cannot be accurately predicted before hand. Advised homeowner his unit holds 11 pounds of R410a. Provided upfront cash price to the homeowner with manager approval. Homeowner stated he
Anna, TX 75409
Anna, TX - Homeowner was not present at arrival and I proceeded to check outdoor unit with permission from the homeowner. Disassembled outdoor condenser to look for leaks and found no evidence of a leak. Checked condenser fins, coil loops, and valve cores. Homeowner arrived at the property and let me inside to check evaporator coil. Found seals broken and coil door lightly secured. Proceeded to perform electronic leak test on coils and got hits of refrigerant consistently near loop video included. This confirms the leak is here in the evaporator coil.

    Provided options to the homeowner for changing the coil out and partial system replacement. Coil replacement would include replacement of TXV and liquid line filter dryer as is standard with replacement. Advised homeowner refrigerant is priced by the pound and cannot be accurately predicted before hand. Advised homeowner his unit holds 11 pounds of R410a. Provided upfront cash price to the homeowner with manager approval. 

Homeowner stated he
Anna, TX - Homeowner was not present at arrival and I proceeded to check outdoor unit with permission from the homeowner. Disassembled outdoor condenser to look for leaks and found no evidence of a leak. Checked condenser fins, coil loops, and valve cores. Homeowner arrived at the property and let me inside to check evaporator coil. Found seals broken and coil door lightly secured. Proceeded to perform electronic leak test on coils and got hits of refrigerant consistently near loop video included. This confirms the leak is here in the evaporator coil.

    Provided options to the homeowner for changing the coil out and partial system replacement. Coil replacement would include replacement of TXV and liquid line filter dryer as is standard with replacement. Advised homeowner refrigerant is priced by the pound and cannot be accurately predicted before hand. Advised homeowner his unit holds 11 pounds of R410a. Provided upfront cash price to the homeowner with manager approval. 

Homeowner stated he
Shelby S.
Shelby S.
I performed a single cooling maintenance on a 2024 gas system. I checked amps, capacitor, filter, electrical, drains, cleanliness, and safeties. During my thorough evaluation, I did not discover any mechanical concerns. I advised the customer that installing surge protector on the system could protect the system and reduce the risk of unnecessary downtime due to surge damage. Customer approved the installation of the surge protector on the outdoor unit. 3 year warranty / up to 10,000.00 coverage if part fails to protect the connected equipment. (Warranty is through manufacturer)
Anna, TX 75409
Anna, TX - I performed a single cooling maintenance on a 2024 gas system. I checked amps, capacitor, filter, electrical, drains, cleanliness, and safeties. During my thorough evaluation, I did not discover any mechanical concerns. I advised the customer that installing surge protector on the system could protect the system and reduce the risk of unnecessary downtime due to surge damage. Customer approved the installation of the surge protector on the outdoor unit.

3 year warranty / up to 10,000.00 coverage if part fails to protect the connected equipment. (Warranty is through manufacturer)
Anna, TX - I performed a single cooling maintenance on a 2024 gas system. I checked amps, capacitor, filter, electrical, drains, cleanliness, and safeties. During my thorough evaluation, I did not discover any mechanical concerns. I advised the customer that installing surge protector on the system could protect the system and reduce the risk of unnecessary downtime due to surge damage. Customer approved the installation of the surge protector on the outdoor unit.

3 year warranty / up to 10,000.00 coverage if part fails to protect the connected equipment. (Warranty is through manufacturer)
Matthew C.
Matthew C.
ECM Blower Motor Replacement Completed and tested motor after replacement. For the master bedroom
Anna, TX 75409
Anna, TX - 

ECM Blower Motor Replacement


Completed and tested motor after replacement. For the master bedroom
Anna, TX - 

ECM Blower Motor Replacement


Completed and tested motor after replacement. For the master bedroom
Matthew C.
Matthew C.
Clogged drain will need a plumber to unclogged. It is in the wall and between 2 apartments.
Anna, TX 75409
Anna, TX - Clogged drain will need a plumber to unclogged. It is in the wall and between 2 apartments.
Matthew C.
Matthew C.
Upon completion of my thorough evaluation, I tested all electrical components on the inside and outside unit. All electrical components tested within manufacturer specifications. The start amps on the compressor are starting high, I did leave estimate to have that added to the system. I changed filter for client 20x25x4. I flushed and treated the drain lines with total c and water. 44 degrees being supplied to the home. I rinsed the outside unit with water at today’s visit. Unit cooling properly upon departure.
Anna, TX 75409
Anna, TX - Upon completion of my thorough evaluation, I tested all electrical components on the inside and outside unit. All electrical components tested within manufacturer specifications. The start amps on the compressor are starting high, I did leave estimate to have that added to the system. I changed filter for client 20x25x4. I flushed and treated the drain lines with total c and water. 44 degrees being supplied to the home. I rinsed the outside unit with water at today’s visit. Unit cooling properly upon departure.
Anna, TX - Upon completion of my thorough evaluation, I tested all electrical components on the inside and outside unit. All electrical components tested within manufacturer specifications. The start amps on the compressor are starting high, I did leave estimate to have that added to the system. I changed filter for client 20x25x4. I flushed and treated the drain lines with total c and water. 44 degrees being supplied to the home. I rinsed the outside unit with water at today’s visit. Unit cooling properly upon departure.
Shelby S.
Shelby S.
I performed a single cooling maintenance on a 2023 heat pump system. I checked amps, capacitor, filter, electrical, drains, cleanliness, and air quality. The system is mechanically performing well. However, I did discover that the air quality is poor and that the system is beginning to have growth inside of the airhandler. I presented options to address these using bundle pricing and individually.
Anna, TX 75409
Anna, TX - I performed a single cooling maintenance on a 2023 heat pump system. I checked amps, capacitor, filter, electrical, drains, cleanliness, and air quality. The system is mechanically performing well. However, I did discover that the air quality is poor and that the system is beginning to have growth inside of the airhandler. I presented options to address these using bundle pricing and individually.
Anna, TX - I performed a single cooling maintenance on a 2023 heat pump system. I checked amps, capacitor, filter, electrical, drains, cleanliness, and air quality. The system is mechanically performing well. However, I did discover that the air quality is poor and that the system is beginning to have growth inside of the airhandler. I presented options to address these using bundle pricing and individually.
Matthew C.
Matthew C.
Scope of work: Removal of old dat sensor Installing new sensor, Re wiring the sensor to the zone board Testing the unit to insure proper function and adequate cooling.
Anna, TX 75409
Anna, TX - Scope of work: 

Removal of old dat sensor
Installing new sensor, 
Re wiring the sensor to the zone board 
Testing the unit to insure proper function and adequate cooling.
Anna, TX - Scope of work: 

Removal of old dat sensor
Installing new sensor, 
Re wiring the sensor to the zone board 
Testing the unit to insure proper function and adequate cooling.

Your High Efficiency

Experts