Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in April 2026.
The most recent job was on April 27, 2026.
Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Upon arrival, I discovered the thermostat was blank. I removed the thermostat from the wall. It has corrosion at the contacts. When putting back on the wall the thermostat flickered on, but it goes right back off. I tested voltage. I confirmed that the thermostat is the issue. Customer did not approve the installation of the replacement thermostat at the time of service.
Upon arrival client stated the ac was not keeping up. I placed gauges on the system to find the system very low in refrigerant. As I investigated further I found that the metering devices to be frozen over along with doing a courtesy leak test to check for and leaks. I did get a couple of hits from the leak detector indicating there is a leak. Spoke to the homeowner a she stated thought we came out an changed the coils. I did inform her we topped the unit off with refrigerant but did not change the coils. Client wants estimate for coil replacement.
Upon initial inspection of the air handler, I found the filter to be extremely dirty. Replaced filter with customer provided filter and dated. Found water in the drain pan triggering float switch. Tested outdoor electrical components and found them to be testing within manufacturer specifications. Tested functionality of outdoor compressor and condenser fan motor and found them to be working as intended. Turned unit onto cooling and found blower motor to be functioning properly. Measured supply temp of 56° and return temp of 78. Measured refrigerant pressures and found them to be testing within manufacture specifications. Tested drain line after ptrap and found it to be draining well. Tested drainage from Evap coil pan and found water would come out the secondary. Flushed with water and blockage appeared to clear itself and water was draining out of primary line at a good rate. Advised homeowner to keep and eye on the secondary line to see if water continues to fall into the drain p
1. Visually inspected condenser coil for leaks and abnormalities. 2. Inspected condenser fan motor, blades and bearings. 3. Inspected, cleaned, and, tightened wiring connections. 4. Measured capacitance of compressor/fan motor capacitor. 5. Inspected and measured resistance of contactor 6. Measured compressor current draw. 7. Measured condenser fan motor amp draw. 8. Inspected and replaced return filter. 9. Inspected return plenum for dust or debris. 10. Inspected evaporator coil for cleanliness and oxidation. 11. Inspected blower motor/ blower wheel for dust and debris 12. Measured blower motor current draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested drain lines for proper drainage and treated to prevent blockages. 15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. Found water in drain pan. Tested drain line and found them to be clear. Upon further inspection it was foun
Preformed dryer vent cleaning, presented before and after pictures to client.
Upon completion of my thorough evaluation, I tested all electrical components on the inside unit. All tested within manufacturer specifications, i was getting a supply temperature of 51 degrees. I flushed and treated the drain lines with total c and water. I proceeded inside where I changed the filter in the ceiling for the client 20x30x1. I then proceeded outside to test all the electrical on the outside unit. All tested within manufacturer specifications. I rinsed the unit with water at today’s visit. I did notice the client did not have surge protection. By adding surge protection to your unit you can help prevent ant potential damage that could be caused by lightning strikes and other types of power surges. Unit was cooling upon departure.
Upon completion of my thorough evaluation I tested all electrical on the inside unit and outside unit. I found on the outside unit that the unit is starting high on amps which over time can wear down a compressor and eventually cause it to fail. Along with this the current capacitor is failing out of manufacturer specifications range, reading 35/45 and 7.2/7.5. If this part fails completely then the unit will not operate to cool the house. The current filter being used is a 20x25x4 box filter, while this is a good choice for filtration. The unit could benefit from having the filter upgraded to the Aprilaire 210 filter. Which can help combat allergens and help keep the systems major components cleaner. I treated the drain lines with totalc and water, also I rinsed the outdoor unit with water. Unit was cooling upon departure.
1. Visually inspected condenser coil for leaks and abnormalities. 2. Inspected condenser fan motor, blades and bearings. 3. Inspected, cleaned, and, tightened wiring connections. 4. Measured capacitance of compressor/fan motor capacitor. 5. Inspected and measured resistance of contactor 6. Measured compressor current draw. 7. Measured condenser fan motor amp draw. 8. Inspected and replaced return filter. 9. Inspected return plenum for dust or debris. 10. Inspected evaporator coil for cleanliness and oxidation. 11. Inspected blower motor/ blower wheel for dust and debris 12. Measured blower motor current draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested drain lines for proper drainage and treated to prevent blockages. 15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. Ac is working well no issues at this time. 2004 furnace has accumulated a large amount of dust on the blowe
Preformed refrigerant check on both upstairs and down stairs systems, i found that the upstairs system is performing as it should. Getting good temperature readings on supply and return. 71 return and 50 supply. On the down stairs system it seems there is an issue with the txv not feeding correctly. 55 degrees supply and 68 degrees return. The coils look to be clean on the outside and the filter is clean on the inside. The unit is cooling but not as efficient as it should be.
I performed a single cooling maintenance on a 2019 gas system. I checked amps, capacitor, filter, electrical, drains, debris in the supply grill, cleanliness, and safeties. I informed the customer that likely next visit will be time to change out the Airscrubber cell. During my thorough evaluation, I noticed that the insulation on the suction line outside has deteriorated enough to be brought up. The debris in the supply vent is from plaster that is in the ducts from when the home was built. The outdoor unit could use a deep chemical cleaning due to the metals becoming oxidized. Also, this reduces the efficiency of the system. The insulation has deteriorated enough to warrant replacing. Original was not U/V rated. Poor insulation on the refrigerant lines causes reduced performance.

