Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in April 2026.
The most recent job was on April 9, 2026.
Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Upon completion of my thorough evaluation, I found that the full system could benefit from having a deep cleaning done on it. There is a substantial amount of dust build up on the ducts and blower wheel. This can indicated that the evaporator coil has dust on it as well. The current filter being used is a 20x25x4 box filter. While this is a good option there is an opportunity to upgrade to a Aprilaire filter which can help with collecting more just and combat against allergens. By having a deep cleaning done and upgrading the filter it can help the performance and efficiency of the unit along with helping keep all the major components cleaner. All electrical components tested within manufacturer specifications on the inside and outside units. Temperature being supplied to the home was 48 degrees, I treated and flushed the drain lines with totalc and water. I hanged the filter for the client 20x25x4 and I rinsed the outside unit off with water.
Upon completion of my thorough evaluation of the outside unit. I found that the Contactor was testing well under the manufacture rating. Pass rating is 15-20ohms. The current reading is 6.9 ohms. Also the condenser could benefit from being deep cleaned, to help keep peak performance and efficiency for the unit. All other electrical components tested within manufacturer specifications. There is no running water on the outside of the building to be able to rinse the outside unit off at today’s visit. On the inside unit I tested all electrical components. All tested within manufacturer specifications. Filter does not need to be changed at this time. Aprilaire 210 20x25x4. Temperature being supplied to the pantry is 51 degrees. I treated the drain lines with total c and flushed with water. I spoke to the client about the possible intermittent thermostat issue, they stated the thermostat has been working fine. Unit was cooling upon departure
I performed a single cooling maintenance on a 2023 zoned heat pump system. I checked amps, capacitor, filter, electrical, drains, cleanliness, and safeties. Mechanically the system is performing well with no concerns. I mentioned cleaning the return cavity, and the customer opted to do it himself. I offered preventative options to ward off the formation of growth and to protect the outdoor unit from surges. Customer declined during the time of service.
Upon completion of my thorough evaluation I found that on the inside unit that all the major components could use a good deep cleaning along with the duct work. There is growth present on the coil and blower wheel. There drain line is currently clogged as well. I found water to be in currently draining out of the secondary unit. On the outside unit I found that the compressor is starting out high on amps and could benefit to have a hard start kit installed. I tested all the other electrical components all tested within manufacturer specifications. Supply temperature was 54 degrees. Filter size is 20x25x1 in ceiling. I rinsed the outdoor unit with water.
Homeowner stated she noticed fan running at night and since then noticed intermittently running or not with no call for cooling/heat. Tested fan and found to it be coming on when it should and turning off when it should. Noticed aprilaire fresh air intake controller screen was light up. On my maintenance visit it was missing a wire and I put the wire back where it goes and noticed the screen would not come on. I believed there was an issue with the circuit board from the wire being disconnected. When I returned for the cleanings I noticed the fresh air controller was light up and working as intended. Today it was also light up and working as intended. Advised homeowner this fresh air intake functioning as intended is the cause of the fan running without a call for cooling/heating. Adjusted temperature min/max settings smaller band of acceptable range and lowered run time to 10 minutes an hour. Unit in good working order upon departure.
1. Visually inspected condenser coil for leaks and abnormalities. 2. Inspected condenser fan motor, blades and bearings. 3. Inspected, cleaned, and, tightened wiring connections. 4. Measured capacitance of compressor/fan motor capacitor. 5. Inspected and measured resistance of contactor 6. Measured compressor current draw. 7. Measured condenser fan motor amp draw. 8. Inspected and replaced return filter. 9. Inspected return plenum for dust or debris. 10. Inspected evaporator coil for cleanliness and oxidation. 11. Inspected blower motor/ blower wheel for dust and debris 12. Measured blower motor current draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested drain lines for proper drainage and treated to prevent blockages. 15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. Surge protectors are working. Airscrubber bulb is good and working. Found transformer making loud buzzing an
I performed 2 cooling maintenances on heat pump equipment. The main unit has a 2019 airhandler / 2020 heat pump and the other is a completely 2019. I checked amps, capacitors, filters, drains, cleanliness, electrical, safeties, and rinsed the outdoor units. Systems are performing to manufacture specifications. The units could use a chemical wash to remove some oxidation on the outdoor coils. This will improve performance.
Upon completion of my thorough evaluation I found that the blower wheel had a good amount of dust build up on the fins, this can cause drag and he motor to struggle over time. I tested all electrical components on the inside unit. All were testing within manufacturer specifications. I changed the filter out for the client at today’s visit. 20x25x4 Aprilaire 210. Temperature supplied to the home was at 44 degrees with 64 return air. I treated and flushed the drain lines with total c. On the outside unit I tested all electrical components along with start and run amps of the compressor. All tested within manufacturer specifications at this time. I rinsed the outside unit with water. Unit was cooling upon departure.
I performed 2 cooling maintenances on 2019 gas equipment. I throughly examined amps, electrical, cleanliness, drains, safeties, and rinsed the outdoor units. During my evaluation, I notated a couple of things for both systems. Neither system has a primary water safety switch, blow out valve, or surge protection. These safeties are designed to keep the equipment and customer’s home safer. Also, I noticed that the outdoor units need a chemical wash to help break apart years of build up. Build up on the outdoor coil causes strain on all of the electrical in the outdoor unit and reduces performance. I present options for all of these items during the time of service.
1. Visually inspected condenser coil for leaks and abnormalities. 2. Inspected condenser fan motor, blades and bearings. 3. Inspected, cleaned, and, tightened wiring connections. 4. Measured capacitance of compressor/fan motor capacitor. 5. Inspected and measured resistance of contactor 6. Measured compressor current draw. 7. Measured condenser fan motor amp draw. 8. Inspected and replaced return filter. 9. Inspected return plenum for dust or debris. 10. Inspected evaporator coil for cleanliness and oxidation. 11. Inspected blower motor/ blower wheel for dust and debris 12. Measured blower motor current draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested drain lines for proper drainage and treated to prevent blockages. 15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. Found merv 16 filter installed in system. Advised homeowner that this causes too much static pressure and pu

