Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in April 2026.
The most recent job was on April 6, 2026.
Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
I found the drain lines ptrap to be cracked. I am having to rebuild the drain line ptrap to make it operational. Rebuilt drain line to ensure leaks was fixed. Tested drains with about a gallon of water not leaks occurred.
I performed a single cooling maintenance on a 2023 gas system. I checked amps, capacitors, filters, electrical, cleanliness, drains, safeties, and I rinsed the outdoor unit. I notated 2 crucial issues with the equipment. The blower motor’s bearings are bad and will result in the motor failing. The 45 capacitor in the outdoor unit is reading 35/45. This indicates that the capacitor is bad and needs replacement. I went over some options for added safety. I offered a primary water safety switch and surge protection, and I went over the benefits of having them. Customer declined all options during time of service.
Arrived on site customer showed me a video of the outdoor condenser fan motor, not running while the compressor was. Inspected indoor air handler coils were not frozen. Filter was very dirty and looks like it needs a change. Fresh air intake filter is also very dirty and looks to need washed. Tested resistance on control and high voltage side of fan motor and got nothing back on both. Unwired compressor and called for cooling. Measured control voltage and high voltage going into the motor. Motor would come on intermittently and then shut itself down for long periods of time. Verified control voltage coming off of the board consistently during shutdown. This verifies that the motor itself is bad and not the control board. Could not get a hold of homeowner left voicemail and sent emails with estimates and invoice. Condenser is shut down at the outdoor breaker for the time being to prevent further damage.
I performed a single cooling maintenance on a 2020 zoned gas system. I checked amps, capacitors, filter, electrical, cleanliness, drains, and refrigerant. Mechanically everything is performing well, but the system has a refrigerant leak. I seen no visual signs that the leak is in the outdoor unit. The warranty on the system is expired. I went over options for addressing the issue. I offered filling it up, filling it up with leak seal, and doing a leak search to verify where the leak is located. Customer did not want to make a decision today on the route for repair. The system is currently producing a 12 degree temperature drop. I noticed the pan was not level so I quickly leveled it. System is not cooling well upon departure.
Air scrubber electrically charges particles in the air causing them to clump together and get picked up by the filter. Also eliminates bacterial contaminates and VOC within the air. Installed and tested air scrubber. Working as intended no issues at this time
I performed a single cooling maintenance on a 2023 heat pump system. I thoroughly examined the electrical, drains, cleanliness, capacitor, and safeties. The system is cooling well with no mechanical issues. I investigated the dripping mentioned by the customer. I climbed under the unit and did not see any visual damage to the primary drain pan. I cut the primary drain line to check if the threaded female fitting was tight. It was loose, and I was able to tighten it a full rotation. After testing all of the outdoor equipment, I went back in to check the drip again, and it appears to be not be dripping anymore. Customer is going to monitor the drip. I advised the customer that surge protection would be a beneficial to the safety of the equipment, and we spoke about duct cleaning.
Upon completion of my thorough evaluation, I found that on he outside unit the capacitor to testing below manufacturer specifications. This part is like the battery for the system. It is what helps get everything started and keep it running. Client mentioned his filter was fitting tight but a little too tight. I spoke with him about converting the filter box to take an Aprilaire 210 filter. This will provide better filtration and help keep the systems major components cleaner. All other electrical components on he inside unit were testing within manufacturer specifications. I changed the filter for the client at today’s visit. 20x25x4. I flushed and treated the drain lines with total c and water. All other electrical components the outside unit were testing within manufacturer specifications. Unit was cooling upon departure. Upon completion of my thorough evaluation, I found that on he outside unit the capacitor to testing below manufacturer specifications. This part is like the batter
Upon completion of my thorough evaluation I found the ducts and plenum boxes to be dirty with dust. By having them cleaned you can help improve air quality and keep the major components from collecting dust. Tested all electrical components after pulling and cleaning the blower wheel. All electrical tested within manufacturer specifications. I changed clients filter today 20x25x4. I rinsed the outdoor coil and tested all electrical components on the outside unit. All tested within manufacturer specifications. Unit was cooling upon departure.
Upon completion of my thorough evaluation, I found that the duct work, blower wheel, evaporator coil and drain lines could use a good deep cleaning and clearing. The system is showing signs of dust build up. By having them all cleaned it can help improve air quality of the home, the client had me check the filter being used, I advised the filter is in the attic not the ceiling and is a 20x25x1 filter, the system has the capability to take a Aprilaire filter. 20x25x4 and by adding the upgraded filter it can help improve air quality and keep the major components after the filter cleaner. Filter has not been changed, no filter provided. Unit is getting 55 degrees supplied to the home and 75 return. On the condenser unit, it could benefit from having a deep cleaning done on it as well. By cleaning the unit it will help with overall performance and efficiency. All the electrical components on the system are testing within manufacturer specifications and the unit is working properly at this
Upon completion of my thorough evaluation I found that the blower wheel to have some dust build up on it. By cleaning this major component it can help maintain the peak performance and efficiency of the unit. Dust can cause drag and sometimes premature failure to the motor. Client is currently using an in the ceiling 20x25x1 filter. Unit in the attic has the capability to take the Aprilaire filter. This filter can help improve air quality and keep the major components clean longer. Temperature supplied to the home is 55 degrees and 72 return air. I did change clients filter at today’s visit. Treated and flushed drain lines with total c and water. Upon completion of my thorough evaluation of the outside unit. All electrical tested within manufacturer specifications. I did notice the unit could benefit from a condenser deep cleaning. Also the unit doesn’t have any type of surge protection on the system, by having the unit cleaned you can help maintain peak performance and efficiency of

