Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX between March 2026 and April 2026.
The most recent job was on April 1, 2026.
Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
I performed a single cooling maintenance on a 2023 gas system. I thoroughly evaluated the indoor and outdoor equipment. During this evaluation, I notated various things to discuss with the customer. The equipment does not have dedicated surge protection. The customer mentioned that they lose power often. The outdoor coil is becoming oxidized. This leads to a reduction in performance and a higher cost to operate the equipment. While testing the drains, I noticed a gurgling noise coming from the drain. I spoke to the home owner about a clog forming in the drain. I observed that the filter is not a perfect seal causing dust to bypass the filter. I offered to upgrade the filtration to keep the indoor equipment cleaner and reduce allergens.
I performed a cooling maintenance on a less than one year old system. The equipment is a zoned communicating R454b heat pump. I checked amps, filter, electrical, cleanliness, drains, rinsed the unit, and safeties. I discovered no deficiencies with the equipment. I brought up that the system may need a u/v light in the future to ward off growth. System is cooling upon departure.
Upon completion of my thorough evaluation, I found that both the units could benefit from having a level 1 duct cleaning. There are some dust build up in both systems ducts. On the downstairs unit I did also fin that blower wheel had some dust build up on it as well. By having the ducts and the blower wheel cleaned, you can help improve air quality in the home and help the major components maintain peak performance and efficiency. Both units have Aprilaire high efficiency air cleaners installed. I tested all electrical components all tested within manufacturer specifications. On the downstairs unit i was getting 52 supply temperature and 71 return temperature. On the upstairs unit i was getting 48 supply temperature and 70 return temperature. I flushed and treated both drain line with water and total c. Upon completion of my thorough evaluation I found that the downstairs unit could benefit from adding a hard start kit to the unit. The max amps on start up are at 100 amps. Max amps f
Upon arrival Maintenance manager Carlos stated that apartment 3202 was having an issue with the blower motor for the airhandler going in and out. After speaking with the tenant this was happing also in the heating cycle. The system is an electric heat and straight ac unit. After further diving into the unit I tested the original blower motor it was testing fine. I then found a loose connection on the high voltage side not allowing the blower tto get full power. Quote Summary - Blower Motor Replacement (Customer Supplied Part) - Apartment#3102 Scope of Work - Remove existing blower motor - Install customer-provided blower motor - Reconnect wiring and ensure proper mounting and alignment - Test system to verify proper airflow and operation Materials & Equipment - Customer-provided blower motor - Mounting hardware and electrical connection supplies (as needed) Special Notes - No warranty is provided on customer-supplied parts - Any defects or failures related to the provided motor a
Upon arrival I spoke with the home homeowner, she stated the unit wouldn’t turn off after reaching set point. I began by checking all the wires from the new capacitor install and the outdoor disconnect. All was wired up correctly. I checked the Contactor and found pitting. I explained to the homeowner that this could be causing the issue of the unit not shutting off. Homeowner elected to to wait on replacement of the contactor. I tested the unit allowing it to run and turned it off several times and unit was working properly.
Upon completion of my thorough evaluation I found that the capacitor on the fan side was failing 1.8/5 mfd. this can cause failure to the fan motor and not allow it to run. 45/5. I presented findings to the client and he elected to have capacitor replaced today. I tested all other electrical components and they all tested within manufacturer specifications. I rinsed the outside unit at today’s visit with water. On the inside unit if found the blower wheel to be dirty along with the duct work. I treated and flushed the drain lines with total c. Unit was cooling upon departure
Upon my thorough evaluation I found he blower wheels on both units could benefit from having a deep cleaning done on them. By cleaning the blower wheels you can help the air quality of the home and overall performance and efficiency of the unit. I tested all of the electrical components on the inside units. All tested within manufacturer specifications. I treated and flushed the drain line with water at the time of inspection. Upon completion of my thorough evaluation, I found that both units could benefit from having the condenser deep cleaned. By cleaning the condensers you can help the unit maintain its peak performance and provide adequate cooling to your home. I tested all electrical components and start amps of the compressor. All tested within manufacturer specifications on both units. I also noticed that both units did not have surge protection on them. By adding surge protection you can help prevent any damage to your unit caused by lightning strikes and other power surges. I
Performed maintenance on 2017 Armstrong air furnaces upstairs/ downstairs 1. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. 2. Visually inspected condenser coil for leaks and abnormalities. 3. Inspected condenser fan motor, blades and bearings. 4. Inspected, cleaned, and, tightened wiring connections. 5. Measured capacitance of compressor/fan motor capacitor. 6. Inspected and measured resistance of contactor 7. Measured compressor current draw. 8. Measured condenser fan motor amp draw. 9. Inspected and replaced return filter. 10. Inspected return plenum for dust or debris. 11. Inspected evaporator coil for cleanliness and oxidation. 12. Inspected blower motor/ blower wheel for dust and debris 13. Measured blower motor current draw. 14. Measured temperature differential from supply to return. 20 degrees measured. 15. Tested drain lines for proper drainage and treated to prevent blockages. Found capacitor testing outside ma
Float switch was not properly secured. Secured float switch and verified unit was cooling.

