Menu

Heating and Air Conditioning Services in Anna, TX

Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.

Schedule Service in AnnaCall (903) 482-4900

HVAC Services in Anna, TX

Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:

AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.

AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.

Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.

Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.

Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.

Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.

Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.

HVAC Services for Anna’s Growing Neighborhoods

Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.

For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.

Why Anna Homeowners Choose Adon Complete

Schedule Service in AnnaCall (903) 482-4900

Frequently Asked Questions

Here are some answers to common questions we get about our Anna HVAC services.

How much does AC repair cost in Anna, TX?

Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Anna?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.

What HVAC brands do you service in Anna?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.

Do you offer HVAC maintenance plans in Anna?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.

What areas near Anna do you serve?

We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.

Schedule HVAC Service in Anna Today

We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in AnnaCall (903) 482-4900

Recent Jobs and Reviews in Anna, TX

Rated 4.9 out of 5 stars based on 67 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Anna, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in March 2026.

The most recent job was on March 26, 2026.

Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.

Job Locations

Brayden W.
Brayden W.
Perform maintenance on 2016 furnace. Cooling 1. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. 2. Visually inspected condenser coil for leaks and abnormalities. 3. Inspected condenser fan motor, blades and bearings. 4. Inspected, cleaned, and, tightened wiring connections. 5. Measured capacitance of compressor/fan motor capacitor. 6. Inspected and measured resistance of contactor 7. Measured compressor current draw. 8. Measured condenser fan motor amp draw. 9. Inspected and replaced return filter. 10. Inspected return plenum for dust or debris. 11. Inspected evaporator coil for cleanliness and oxidation. 12. Inspected blower motor/ blower wheel for dust and debris 13. Measured blower motor current draw. 14. Measured temperature differential from supply to return. 20 degrees measured. 15. Tested drain lines for proper drainage and treated to prevent blockages. Found drain line starting to drain a little bit slowly. Blew on
Anna, TX 75409
Anna, TX - Perform maintenance on 2016 furnace.
Cooling
1. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris.
2. Visually inspected condenser coil for leaks and abnormalities.
3. Inspected condenser fan motor, blades and bearings.
4. Inspected, cleaned, and, tightened wiring connections.
5. Measured capacitance of  compressor/fan motor capacitor.
6. Inspected and measured resistance of contactor
7. Measured compressor current draw.
8. Measured condenser fan motor amp draw.
9. Inspected and replaced return filter.
10. Inspected return plenum for dust or debris.
11. Inspected evaporator coil for cleanliness and oxidation.
12. Inspected blower motor/ blower wheel for dust and debris
13. Measured blower motor current draw.
14. Measured temperature differential from supply to return. 20 degrees measured.
15. Tested drain lines for proper drainage and treated to prevent blockages.

Found drain line starting to drain a little bit slowly. Blew on
Anna, TX - Perform maintenance on 2016 furnace.
Cooling
1. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris.
2. Visually inspected condenser coil for leaks and abnormalities.
3. Inspected condenser fan motor, blades and bearings.
4. Inspected, cleaned, and, tightened wiring connections.
5. Measured capacitance of  compressor/fan motor capacitor.
6. Inspected and measured resistance of contactor
7. Measured compressor current draw.
8. Measured condenser fan motor amp draw.
9. Inspected and replaced return filter.
10. Inspected return plenum for dust or debris.
11. Inspected evaporator coil for cleanliness and oxidation.
12. Inspected blower motor/ blower wheel for dust and debris
13. Measured blower motor current draw.
14. Measured temperature differential from supply to return. 20 degrees measured.
15. Tested drain lines for proper drainage and treated to prevent blockages.

Found drain line starting to drain a little bit slowly. Blew on
Matthew C.
Matthew C.
Upon completion of my thorough evaluation, I found that the systems upstairs and downstairs could benefit from having full system cleaning done on all the major components. Ducts have extremely heavy dust inside the, blower wheels need to be cleaned, evaporator coils. Also the filtration system that is being used is a 20x25x4 box filter on both units. Both units could be upgraded to the Aprilaire 210 filters for better air quality and help keep the major components clean. I treated and flushed drain lines with total c and water. Upon completion of my thorough evaluation of both systems, i found that the capacitor on the upstairs unit to be testing on the lower end of the specification range at 33.8/35 the allowance is at 32.9. Both Contactors are testing on the high end of the specification range at 19 and 20 ohms. Allowance for these at between 15-20 ohms. Also both units could benefit from having a the condensers cleaned. I rinsed the outdoor units with water only. Units were co
Anna, TX 75409
Anna, TX - Upon completion of my thorough evaluation, I found that the systems upstairs and downstairs could benefit from having  full system cleaning done on all the major components. Ducts have extremely heavy dust inside the, blower wheels need to be cleaned, evaporator coils. Also the filtration system that is being used is a 20x25x4 box filter on both units. Both units could be upgraded to the Aprilaire 210 filters for better air quality and help keep the major components clean. I treated and flushed drain lines with total c and water. 

Upon completion of my thorough evaluation of both systems, i found that the capacitor on the upstairs unit to be testing on the lower end of the specification range at 33.8/35 the allowance is at 32.9. Both Contactors are testing on the high end of the specification range at 19 and 20 ohms. Allowance for these at between 15-20 ohms. Also both units could benefit from having a the condensers cleaned. I rinsed the outdoor units with water only. 

Units were co
Anna, TX - Upon completion of my thorough evaluation, I found that the systems upstairs and downstairs could benefit from having  full system cleaning done on all the major components. Ducts have extremely heavy dust inside the, blower wheels need to be cleaned, evaporator coils. Also the filtration system that is being used is a 20x25x4 box filter on both units. Both units could be upgraded to the Aprilaire 210 filters for better air quality and help keep the major components clean. I treated and flushed drain lines with total c and water. 

Upon completion of my thorough evaluation of both systems, i found that the capacitor on the upstairs unit to be testing on the lower end of the specification range at 33.8/35 the allowance is at 32.9. Both Contactors are testing on the high end of the specification range at 19 and 20 ohms. Allowance for these at between 15-20 ohms. Also both units could benefit from having a the condensers cleaned. I rinsed the outdoor units with water only. 

Units were co
Matthew C.
Matthew C.
Upon completion of my thorough evaluation, I found that the air handler in the attic could benefit from having the system fully deep cleaned. There is a substantial amount of dust in the duct, build up of growth on the blower and evaporator coil. By having the system fully deep cleaned it will help the units overall efficiency and performance, as well as help the unit live longer. Also the filter could be upgraded to the Aprilaire 210 to help improve the air quality and cleanliness of the systems major components. Filter size is 20x25x4. I treated the drain lines with total c and flushed with water. Upon completion of my thorough evaluation, I found that the 35/5 capacitor was beginning to show signs of end of life. Testing at 33/35. While manufacturer rating is set at 32.9 to be the lowest allowance. If this part were to fail the unit would not cool or heat the home. The unit also doesn’t have any type of surge protection on it. By adding surge protection you can help prevent damage
Anna, TX 75409
Anna, TX - Upon completion of my thorough evaluation, I found that the air handler in the attic could benefit from having the system fully deep cleaned. There is a substantial amount of dust in the duct, build up of growth on the blower and evaporator coil. By having the system fully deep cleaned it will help the units overall efficiency and performance, as well as help the unit live longer. Also the filter could be upgraded to the Aprilaire 210 to help improve the air quality and cleanliness of the systems major components. Filter size is 20x25x4. I treated the drain lines with total c and flushed with water.

Upon completion of my thorough evaluation, I found that the 35/5 capacitor was beginning to show signs of end of life. Testing at 33/35. While manufacturer rating is set at 32.9 to be the lowest allowance. If this part were to fail the unit would not cool or heat the home. The unit also doesn’t have any type of surge protection on it. By adding surge protection you can help prevent damage
Anna, TX - Upon completion of my thorough evaluation, I found that the air handler in the attic could benefit from having the system fully deep cleaned. There is a substantial amount of dust in the duct, build up of growth on the blower and evaporator coil. By having the system fully deep cleaned it will help the units overall efficiency and performance, as well as help the unit live longer. Also the filter could be upgraded to the Aprilaire 210 to help improve the air quality and cleanliness of the systems major components. Filter size is 20x25x4. I treated the drain lines with total c and flushed with water.

Upon completion of my thorough evaluation, I found that the 35/5 capacitor was beginning to show signs of end of life. Testing at 33/35. While manufacturer rating is set at 32.9 to be the lowest allowance. If this part were to fail the unit would not cool or heat the home. The unit also doesn’t have any type of surge protection on it. By adding surge protection you can help prevent damage
Matthew C.
Matthew C.
Upon my thorough evaluation I found that the blower wheel could benefit from a deep cleaning along with the evaporator coil. The system does have a safety float on the pan only, by adding one to the primary drain line it will assure you when a clog occurs in the pipe to shut off the system before over flowing water onto the ceiling, also the line has no blow out valve. By adding a blow out valve it will allow easier access to clear the drain line with compressed air or nitrogen. On the condenser unit, I found that the capacitor while still working at the time of inspection, it is testing below manufacturer specifications at 39/45, if this part ever fails the unit will not start until replaced. The condenser fins have very minimal damage to them at the time of inspection and while they could benefit from being combed out it is only to one side of the condenser. The system does not have any type of surge protection, by adding surge protection to the unit it will help prevent any da
Anna, TX 75409
Anna, TX - Upon my thorough evaluation I found that the blower wheel could benefit from a deep cleaning along with the evaporator coil. The system does have a safety float on the pan only, by adding one to the primary drain line it will assure you when a clog occurs in the pipe to shut off the system before over flowing water onto the ceiling, also the line has no blow out valve. By adding a blow out valve it will allow easier access to clear the drain line with compressed air or nitrogen. 

On the condenser unit, I found that the capacitor while still working at the time of inspection, it is testing below manufacturer specifications at 39/45, if this part ever fails the unit will not start until replaced. 

The condenser fins have very minimal damage to them at the time of inspection and while they could benefit from being combed out it is only to one side of the condenser. 

The system does not have any type of surge protection, by adding surge protection to the unit it will help prevent any da
Anna, TX - Upon my thorough evaluation I found that the blower wheel could benefit from a deep cleaning along with the evaporator coil. The system does have a safety float on the pan only, by adding one to the primary drain line it will assure you when a clog occurs in the pipe to shut off the system before over flowing water onto the ceiling, also the line has no blow out valve. By adding a blow out valve it will allow easier access to clear the drain line with compressed air or nitrogen. 

On the condenser unit, I found that the capacitor while still working at the time of inspection, it is testing below manufacturer specifications at 39/45, if this part ever fails the unit will not start until replaced. 

The condenser fins have very minimal damage to them at the time of inspection and while they could benefit from being combed out it is only to one side of the condenser. 

The system does not have any type of surge protection, by adding surge protection to the unit it will help prevent any da
Matthew C.
Matthew C.
Upon arrival i found the compressor and fan out door to not be running. Upon thorough inspection I found the low voltage wire that goes to the Contactor on a call for cooling to have been loose. I reconnected wire and unit start cooling properly.
Anna, TX 75409
Anna, TX - Upon arrival i found the compressor and fan out door to not be running. Upon thorough inspection I found the low voltage wire that goes to the Contactor on a call for cooling to have been loose. I reconnected wire and unit start cooling properly.
Anna, TX - Upon arrival i found the compressor and fan out door to not be running. Upon thorough inspection I found the low voltage wire that goes to the Contactor on a call for cooling to have been loose. I reconnected wire and unit start cooling properly.
Matthew C.
Matthew C.
Completed cleanings and installed Aprilaire filter kit Upon completion of my thorough evaluation of the system. I found that the condenser and evaporator coil could benefit from a cleaning to maintain peak performance and efficiency. Dust build up is one of the leading causes for an hvac system to break down over time. By deep cleaning the components it will help prolong the life of the system. Also by upgrading your filters to the Aprilaire filters it will help keep the components cleaning longer. Current filter size is 20x25x4
Anna, TX 75409
Anna, TX - Completed cleanings and installed Aprilaire filter kit

Upon completion of my thorough evaluation of the system. I found that the condenser and evaporator coil could benefit from a cleaning to maintain peak performance and efficiency. Dust build up is one of the leading causes for an hvac system to break down over time. By deep cleaning the components it will help prolong the life of the system. Also by upgrading your filters to the Aprilaire filters it will help keep the components cleaning longer. Current filter size is 20x25x4
Anna, TX - Completed cleanings and installed Aprilaire filter kit

Upon completion of my thorough evaluation of the system. I found that the condenser and evaporator coil could benefit from a cleaning to maintain peak performance and efficiency. Dust build up is one of the leading causes for an hvac system to break down over time. By deep cleaning the components it will help prolong the life of the system. Also by upgrading your filters to the Aprilaire filters it will help keep the components cleaning longer. Current filter size is 20x25x4
Shelby S.
Shelby S.
I performed 2 cooling maintenances on 2019 gas systems. I checked amps, capacitors, filters, electrical, cleanliness, drains, and safeties. I discovered that the upstairs system needs a hard start kit to assist the compressor during start up, the upstairs emergency drain pan is beginning to rust through, and both systems need duct cleaning. Customer elected to move forward with the emergency drain pan. We will reach out once we acquire the pan.
Anna, TX 75409
Anna, TX - I performed 2 cooling maintenances on 2019 gas systems. I checked amps, capacitors, filters, electrical, cleanliness, drains, and safeties. I discovered that the upstairs system needs a hard start kit to assist the compressor during start up, the upstairs emergency drain pan is beginning to rust through, and both systems need duct cleaning. Customer elected to move forward with the emergency drain pan. We will reach out once we acquire the pan.
Anna, TX - I performed 2 cooling maintenances on 2019 gas systems. I checked amps, capacitors, filters, electrical, cleanliness, drains, and safeties. I discovered that the upstairs system needs a hard start kit to assist the compressor during start up, the upstairs emergency drain pan is beginning to rust through, and both systems need duct cleaning. Customer elected to move forward with the emergency drain pan. We will reach out once we acquire the pan.
Shelby S.
Shelby S.
Upon arrival, I discovered a system mechanically operating fine. While in the attic I noticed the ductwork slightly bouncing. I checked the filter and found the filter to be dirty. I proceeded outside and checked refrigerant pressures. According to the pressures, it appeared to have poor air flow. I removed the filter and checked the pressures again. All of my readings on the gauges began to go back to normal. I tested the electrical components outside and noticed no issues. I shut the outdoor unit off and witnessed the compressor making a “marble” noise. This could be directly tied back to poor airflow. Customer stated their replacement filter comes in tomorrow. The starting temperature of the downstairs was 74, and I got it down to 69 with no issues. System is cooling upon departure. I went over the importance of maintenance and surge protection.
Anna, TX 75409
Anna, TX - Upon arrival, I discovered a system mechanically operating fine. While in the attic I noticed the ductwork slightly bouncing. I checked the filter and found the filter to be dirty. I proceeded outside and checked refrigerant pressures. According to the pressures, it appeared to have poor air flow. I removed the filter and checked the pressures again. All of my readings on the gauges began to go back to normal. I tested the electrical components outside and noticed no issues. I shut the outdoor unit off and witnessed the compressor making a “marble” noise. This could be directly tied back to poor airflow. Customer stated their replacement filter comes in tomorrow. The starting temperature of the downstairs was 74, and I got it down to 69 with no issues. System is cooling upon departure. I went over the importance of maintenance and surge protection.
Anna, TX - Upon arrival, I discovered a system mechanically operating fine. While in the attic I noticed the ductwork slightly bouncing. I checked the filter and found the filter to be dirty. I proceeded outside and checked refrigerant pressures. According to the pressures, it appeared to have poor air flow. I removed the filter and checked the pressures again. All of my readings on the gauges began to go back to normal. I tested the electrical components outside and noticed no issues. I shut the outdoor unit off and witnessed the compressor making a “marble” noise. This could be directly tied back to poor airflow. Customer stated their replacement filter comes in tomorrow. The starting temperature of the downstairs was 74, and I got it down to 69 with no issues. System is cooling upon departure. I went over the importance of maintenance and surge protection.
Brayden W.
Brayden W.
Found unit blowing air but compressor was not coming on. Proceeding to the outdoor unit found condenser fan motor weakly spinning and nothing from compressor. Tested capacitor and found it entirely failed 0 mfd. replaced capacitor under parts and labor warranty. Measured 52 degree supply. Unit in good working order upon departure.
Anna, TX 75409
Anna, TX - Found unit blowing air but compressor was not coming on. Proceeding to the outdoor unit found condenser fan motor weakly spinning and nothing from compressor. Tested capacitor and found it entirely failed 0 mfd. replaced capacitor under parts and labor warranty. Measured 52 degree supply. Unit in good working order upon departure.
Anna, TX - Found unit blowing air but compressor was not coming on. Proceeding to the outdoor unit found condenser fan motor weakly spinning and nothing from compressor. Tested capacitor and found it entirely failed 0 mfd. replaced capacitor under parts and labor warranty. Measured 52 degree supply. Unit in good working order upon departure.
Brayden W.
Brayden W.
Blower wheel and evaporator coil chemical cleaning to remove current bacterial growth, improve system efficiency, and improve indoor air quality.
Anna, TX 75409
Anna, TX - Blower wheel and evaporator coil chemical cleaning to remove  current bacterial growth, improve system efficiency, and improve indoor air quality.
Anna, TX - Blower wheel and evaporator coil chemical cleaning to remove  current bacterial growth, improve system efficiency, and improve indoor air quality.

Your High Efficiency

Experts