Menu

Heating and Air Conditioning Services in Anna, TX

Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.

Schedule Service in AnnaCall (903) 482-4900

HVAC Services in Anna, TX

Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:

AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.

AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.

Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.

Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.

Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.

Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.

Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.

HVAC Services for Anna’s Growing Neighborhoods

Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.

For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.

Why Anna Homeowners Choose Adon Complete

Schedule Service in AnnaCall (903) 482-4900

Frequently Asked Questions

Here are some answers to common questions we get about our Anna HVAC services.

How much does AC repair cost in Anna, TX?

Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Anna?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.

What HVAC brands do you service in Anna?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.

Do you offer HVAC maintenance plans in Anna?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.

What areas near Anna do you serve?

We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.

Schedule HVAC Service in Anna Today

We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in AnnaCall (903) 482-4900

Recent Jobs and Reviews in Anna, TX

Rated 4.9 out of 5 stars based on 67 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Anna, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in February 2026.

The most recent job was on February 18, 2026.

Adon Complete Air Conditioning and Heating has completed 588 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.

Job Locations

Brayden W.
Brayden W.
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested capacitor and contactor (outdoor electrical) 15. Rinsed condenser unit to promote heat exchange 16. Tested emergency heat and found no issues Homeowner stated they were seeing a lot of dust within the home and my findings reflect that; As I was seeing a lot of dust on the filter that had been changed in January and return plenum for the system being so new. Customer was unhappy this was not offered at install and is not in
Anna, TX 75409
Anna, TX - 1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested capacitor and contactor (outdoor electrical)
15. Rinsed condenser unit to promote heat exchange
16. Tested emergency heat and found no issues

Homeowner stated they were seeing a lot of dust within the home and my findings reflect that; As I was seeing a lot of dust on the filter that had been changed in January and return plenum for the system being so new. Customer was unhappy this was not offered at install and is not in
Anna, TX - 1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested capacitor and contactor (outdoor electrical)
15. Rinsed condenser unit to promote heat exchange
16. Tested emergency heat and found no issues

Homeowner stated they were seeing a lot of dust within the home and my findings reflect that; As I was seeing a lot of dust on the filter that had been changed in January and return plenum for the system being so new. Customer was unhappy this was not offered at install and is not in
Jesse V.
Jesse V.
After further inspection I found that the defrost board was not sending correct voltage to the reversing valve. Not allowing it to go into cooling mode.
Anna, TX 75409
Jesse V.
Jesse V.
We cleaned the coils of the outside and inside units
Anna, TX 75409
Anna, TX - We cleaned the coils of the outside and inside units
Anna, TX - We cleaned the coils of the outside and inside units
Brayden W.
Brayden W.
Brayden and I perform a 3 system heating maintenance. The units are heat pumps from 2022. We checked amps, capacitors, filters, electrical, and cleanliness. During our thorough evaluation, we discovered growth formations inside of the master bedroom unit. This leads to poor air quality and potential strain on the equipment. The outdoor units do not have protection from power fluctuations. This can cause damage to the outdoor components. The filtration can be improved. There is roughly a 1” gap at the top of the filter that is allowing dust to bypass into the system. A bracket can be installed to improve the dust removal and reduce surprise cleaning costs. We provided preventative and safety options at the time of service.
Anna, TX 75409
Anna, TX - Brayden and I perform a 3 system heating maintenance. The units are heat pumps from 2022. We checked amps, capacitors, filters, electrical, and cleanliness. During our thorough evaluation, we discovered growth formations inside of the master bedroom unit. This leads to poor air quality and potential strain on the equipment. The outdoor units do not have protection from power fluctuations. This can cause damage to the outdoor components. The filtration can be improved. There is roughly a 1” gap at the top of the filter that is allowing dust to bypass into the system. A bracket can be installed to improve the dust removal and reduce surprise cleaning costs. We provided preventative and safety options at the time of service.
Anna, TX - Brayden and I perform a 3 system heating maintenance. The units are heat pumps from 2022. We checked amps, capacitors, filters, electrical, and cleanliness. During our thorough evaluation, we discovered growth formations inside of the master bedroom unit. This leads to poor air quality and potential strain on the equipment. The outdoor units do not have protection from power fluctuations. This can cause damage to the outdoor components. The filtration can be improved. There is roughly a 1” gap at the top of the filter that is allowing dust to bypass into the system. A bracket can be installed to improve the dust removal and reduce surprise cleaning costs. We provided preventative and safety options at the time of service.
Brayden W.
Brayden W.
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested capacitor and contactor (outdoor electrical) 15. Rinsed condenser unit to promote heat exchange 16. Tested emergency heat and found no issues Checked all wire connections in made sure everything was tight. Found drain line was draining slowly. I went ahead and cleared drain line as a courtesy as this is the first visit since install. Spoke with homeowner about options for air purification since they did say, they suffered
Anna, TX 75409
Anna, TX - 1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested capacitor and contactor (outdoor electrical)
15. Rinsed condenser unit to promote heat exchange
16. Tested emergency heat and found no issues

Checked all wire connections in made sure everything was tight. Found drain line was draining slowly. I went ahead and cleared drain line as a courtesy as this is the first visit since install. Spoke with homeowner about options for air purification since they did say, they suffered
Anna, TX - 1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested capacitor and contactor (outdoor electrical)
15. Rinsed condenser unit to promote heat exchange
16. Tested emergency heat and found no issues

Checked all wire connections in made sure everything was tight. Found drain line was draining slowly. I went ahead and cleared drain line as a courtesy as this is the first visit since install. Spoke with homeowner about options for air purification since they did say, they suffered
Matthew C.
Matthew C.
Preformed dryer vent cleaning.
Anna, TX 75409
Anna, TX - Preformed dryer vent cleaning.
Anna, TX - Preformed dryer vent cleaning.
Shelby S.
Shelby S.
Upon arrival, I investigated the noise in question. The blower wheel is spinning out of balance. I confirmed that the blower shaft is not wobbling when it spins, the motor is secure, and the keeper bolt is tight. The wheel is spinning and shaving the blower housing. It appears as if the wheel has warped causing this. Due to the unknown damage that may have happened, it is advised to replace the blower motor, blower wheel, and the blower housing. Customer has not had maintenance and AdonCPS has not been out since the install of the equipment in August of 2020. We will need to reach out to York on Monday to verify warranty and part availability.
Anna, TX 75409
Anna, TX - Upon arrival, I investigated the noise in question. The blower wheel is spinning out of balance. I confirmed that the blower shaft is not wobbling when it spins, the motor is secure, and the keeper bolt is tight. The wheel is spinning and shaving the blower housing. It appears as if the wheel has warped causing this. Due to the unknown damage that may have happened, it is advised to replace the blower motor, blower wheel, and the blower housing. Customer has not had maintenance and AdonCPS has not been out since the install of the equipment in August of 2020. We will need to reach out to York on Monday to verify warranty and part availability.
Anna, TX - Upon arrival, I investigated the noise in question. The blower wheel is spinning out of balance. I confirmed that the blower shaft is not wobbling when it spins, the motor is secure, and the keeper bolt is tight. The wheel is spinning and shaving the blower housing. It appears as if the wheel has warped causing this. Due to the unknown damage that may have happened, it is advised to replace the blower motor, blower wheel, and the blower housing. Customer has not had maintenance and AdonCPS has not been out since the install of the equipment in August of 2020. We will need to reach out to York on Monday to verify warranty and part availability.
Brayden W.
Brayden W.
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested capacitor and contactor (outdoor electrical) 15. Rinsed condenser unit to promote heat exchange 16. Tested emergency heat and found no issues Found larger amount of dust and debris buildup on evaporator coil ( pictures included.). Also found decent amount of dust during the accumulate in the darks recommend duct cleaning to avoid dust from being pulled into the unit and improve indoor air quality. I also noticed there was
Anna, TX 75409
Anna, TX - 1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested capacitor and contactor (outdoor electrical)
15. Rinsed condenser unit to promote heat exchange
16. Tested emergency heat and found no issues

Found larger amount of dust and debris buildup on evaporator coil ( pictures included.). Also found decent amount of dust during the accumulate in the darks recommend duct cleaning to avoid dust from being pulled into the unit and improve indoor air quality. I also noticed there was
Anna, TX - 1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested capacitor and contactor (outdoor electrical)
15. Rinsed condenser unit to promote heat exchange
16. Tested emergency heat and found no issues

Found larger amount of dust and debris buildup on evaporator coil ( pictures included.). Also found decent amount of dust during the accumulate in the darks recommend duct cleaning to avoid dust from being pulled into the unit and improve indoor air quality. I also noticed there was
Jesse V.
Jesse V.
Install two complete HP units, 14 seer, at no charge as 2026 winner of the Cool ac give away prize for a deserving resident in Anna, Texas
Anna, TX 75409
Matthew C.
Matthew C.
Preformed single system maintenance on a 2025 gas furnace. I tested all electrical and safeties on the inside unit. All tested within manufacturer specifications. I noticed when changing the filter that the return ducts were covered in dust. Dust can cause the system to work harder and run down faster over time. I provided estimates to have the ducts cleaned to help prevent any future issues. I proceeded outside to visually inspect the outside unit. I noticed the unit doesn’t have any type of surge protection on it. By adding surge protection you can help prevent any damage being done to the unit in the event of a lightning storm, black/brown outs and other types of surge. This comes with a $10,000.00 repair allowance and 3 year warranty for the manufacturer on whatever part of the unit it is installed on. Unit was heating upon departure. HVAC ONLY 240V SURGE PROTECTOR INTERMATIC AG3000 OR EQUAL SURGE PROTECTORS PROTECT SYSTEMS FROM SIGNIFICANT POWER FLUCTUATIONS.
Anna, TX 75409
Anna, TX - Preformed single system maintenance on a 2025 gas furnace. I tested all electrical and safeties on the inside unit. All tested within manufacturer specifications. I noticed when changing the filter that the return ducts were covered in dust. Dust can cause the system to work harder and run down faster over time. I provided estimates to have the ducts cleaned to help prevent any future issues. I proceeded outside to visually inspect the outside unit. I noticed the unit doesn’t have any type of surge protection on it. By adding surge protection you can help prevent any damage being done to the unit in the event of a lightning storm, black/brown outs and other types of surge. This comes with a $10,000.00 repair allowance and 3 year warranty for the manufacturer on whatever part of the unit it is installed on. Unit was heating upon departure.
HVAC ONLY 240V SURGE PROTECTOR

INTERMATIC AG3000 OR EQUAL

SURGE PROTECTORS PROTECT SYSTEMS FROM SIGNIFICANT POWER FLUCTUATIONS.
Anna, TX - Preformed single system maintenance on a 2025 gas furnace. I tested all electrical and safeties on the inside unit. All tested within manufacturer specifications. I noticed when changing the filter that the return ducts were covered in dust. Dust can cause the system to work harder and run down faster over time. I provided estimates to have the ducts cleaned to help prevent any future issues. I proceeded outside to visually inspect the outside unit. I noticed the unit doesn’t have any type of surge protection on it. By adding surge protection you can help prevent any damage being done to the unit in the event of a lightning storm, black/brown outs and other types of surge. This comes with a $10,000.00 repair allowance and 3 year warranty for the manufacturer on whatever part of the unit it is installed on. Unit was heating upon departure.
HVAC ONLY 240V SURGE PROTECTOR

INTERMATIC AG3000 OR EQUAL

SURGE PROTECTORS PROTECT SYSTEMS FROM SIGNIFICANT POWER FLUCTUATIONS.

Your High Efficiency

Experts