Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in January 2026.
The most recent job was on January 29, 2026.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Replaced blower motor and performed blower wheel cleaning. Tested and found heat to be working as intended pictures on other invoice.
Arrived on site, for no heat on electric heat unit. Found blower motor seized buzzing and refusing to spin. Found very substantial amount of dust build up on blower wheel. This is likely a major contributing factor to the blower wheel seizeing up. As dust on the blower wheel causes drag which causes the motor to work harder and ultimately shorten the life of the motor. Tested electric heat for power and resistance and found no issues. Tenet relayed information to the land lord and elected to replace the motor and wash the blower wheel give the new motor the best chance. Performed blower wheel cleaning and replaced motor. Tested heat strips to ensure they were still functioning properly and found no issues. Unit in good working order upon departure.
I arrived and replaced the zone board. After tested, I reached out to tech support for some clarification on things. With tech supports help, I was able to get the programming corrected and tested the emergency heat. The system is now able to heat with the heat pump and electric heat. I tested the zoning and found that the downstairs hardly gets air when both zones are operating. I advised the customer to leave the down stairs thermostat on 75 and upstairs on 71 to allow the downstairs to run by itself. This will give better airflow by not sharing it with another zone. System is heating in both cycles upon departure.
Upon arrival, I found that the unit was completely empty of refrigerant. I visually discovered oil in the airhandler from a leaking evaporator coil. I spoke with the home owner about options to address, and we came to the conclusion that system replacement would be the best options for them. The emergency heat is active and keeping the home warm. We are scheduled to return 1/29 between 10am-12pm to go over replacement options.
Upon arrival found that the power switch in the attic was off. Showed client and had the switch labeled. Also showed the client a couple options for having ducts cleaned, blower wheel and adding a Aprilaire conversion kit. Client decided to go with cleanings and conversion kit
Upon arrival i found the blower motor to not be running. I tested the capacitor on the fan and found it to have failed not allowing the motor to start up. Client wanted to go ahead with repair. After repair heating is working correctly. Also offered cleanings due to the condition of the blower wheel. 7.5 MFD RUN CAPACITOR REPLACEMENT SIMILAR TO A BATTERY, CAPACITORS HELP START MOTORS BY STORING CURRENT. A DAMAGED CAPACITOR CAN DAMAGE THE MOTOR IF NOT SERVICED. REGULAR MAINTENANCE IS ENCOURAGED.
Homeowner stated thermostat was stuck in a boot loop and breaker to outdoor unit was tripped and would not go back after he attempted a power cycle. All this happened after a power outage this morning. Informed homeowner this would need to be replaced by an electrician. Began inspection at indoor 2018 furnace Lennox 3 ton. Started by jumping R to W bypassing the thermostat and unit completed heating cycle and continued to run for 30 minutes. Further tested unit to ensure that the circuit board was still functioning properly, and it was only the thermostat that was affected. I was able to confirm 100% that the thermostat was at fault. I will not be able to further test the outdoor unit until the breaker issue is addressed, however, I did notice a good amount of dust and debris in the outdoor coils restricting airflow. This will cause undo stress on the compressor and electrical components. I also noticed a decent amount of dust on the blower wheel. This creates drag, causing the motor t
Performed a complete heating system maintenance and inspection. communicating 2023 Gas system. Inspected and tested all electrical components and safety controls on the indoor unit; all components tested within manufacturer specifications. Verified system temperatures: return air temperature measured at 71°F; supply air temperature measured at 107°F and rising. Confirmed air filter was recently replaced by client; filter size is 16” x 25” x 4”. And 20x25x4 Aprilaire I visually inspected the outdoor unit, The outdoor unit was in good condition Confirmed system was operating properly and heating upon departure. System Status: Operating normally at time of service.
Preformed single system heat maintenance on a 2014 Lennox heat pump. I tested all electrical components on he inside air handler. All tested within manufacturer specifications. I did notice some build up on he blower wheel. It could benefit from a cleaning. I proceeded outside to test all electrical components, start and run amps on the compressor. All tested within manufacturer specifications, except for the fan run capacitor. It is failing at 6.5MFd/7.5MFd. I also noticed the unit did not have any type of surge protection. I provided estimates for all cleanings and concerns to be addressed. Client had run capacitor for the fan replaced today. Unit was heating upon departure
Arrived on site for QC visit on 3 mini splits and one conventional. System is level all wiring is good no error codes. Getting over 20 degree temp split. Drain line is draining at this time. System is clean and operating as designed. Outside unit is level all electrical components are good and tight. All components are operating as designed. Pressures were within manufacturer specifications. Tested normal heating operation. Had some issues with the pipe sizing programming on the building with 2 head mini split . Reprogrammed unit while holding ODT sensor was successful and units began to run without issue.

