Menu

Heating and Air Conditioning Services in Anna, TX

Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.

Schedule Service in AnnaCall (903) 482-4900

HVAC Services in Anna, TX

Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:

AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.

AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.

Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.

Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.

Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.

Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.

Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.

HVAC Services for Anna’s Growing Neighborhoods

Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.

For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.

Why Anna Homeowners Choose Adon Complete

Schedule Service in AnnaCall (903) 482-4900

Frequently Asked Questions

Here are some answers to common questions we get about our Anna HVAC services.

How much does AC repair cost in Anna, TX?

Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Anna?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.

What HVAC brands do you service in Anna?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.

Do you offer HVAC maintenance plans in Anna?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.

What areas near Anna do you serve?

We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.

Schedule HVAC Service in Anna Today

We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in AnnaCall (903) 482-4900

Recent Jobs and Reviews in Anna, TX

Rated 4.9 out of 5 stars based on 67 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Anna, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in January 2026.

The most recent job was on January 23, 2026.

Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.

Job Locations

Matthew C.
Matthew C.
Upon arrival i found the unit not sending power to the board. I verified 125v going to the board. I then proceeded to check the fuse and found it blown which told me there was short.i found the short to be on the red wire, it was rubbing against the door of the unit. I presented the findings to the home owner, he elected to have wire repairs and fused replaced. Unit was back up and running after repairs. Supply temp was 121 degrees.
Anna, TX 75409
Anna, TX - Upon arrival i found the unit not sending power to the board. I verified 125v going to the board. I then proceeded to check the fuse and found it blown which told me there was short.i found the short to be on the red wire, it was rubbing against the door of the unit. I presented the findings to the home owner, he elected to have wire repairs and fused replaced. Unit was back up and running after repairs. Supply temp was 121 degrees.
Anna, TX - Upon arrival i found the unit not sending power to the board. I verified 125v going to the board. I then proceeded to check the fuse and found it blown which told me there was short.i found the short to be on the red wire, it was rubbing against the door of the unit. I presented the findings to the home owner, he elected to have wire repairs and fused replaced. Unit was back up and running after repairs. Supply temp was 121 degrees.
Shelby S.
Shelby S.
Upon arrival, I found that the thermostat was blank. I proceeded to the attic and discovered a safety lock out code. This systems appears to have had the inducer motor replaced. I discovered the flame sensor wire was burnt up, the manifold is completely matted with soot, and the burners are covered in soot. I checked my gas pressure to the system. I only have 7inwc coming into the gas valve, and it should be 13inwc. I checked the supplied gas pressure through the gas valve. It is reading 2.2inwc, and it should be 3.5inwc. I assume with the low gas supply it caused an incomplete combustion. This caused soot build up and it began lighting the soot. We will need to price for a gas valve, 5 burner manifold, 5 burner guides, and a minor wire repair. I was instructed by the realtor to email the dispatch to the owner. The owner will likely want to get the gas company out asap to perform a pressure test.
Anna, TX 75409
Anna, TX - Upon arrival, I found that the thermostat was blank. I proceeded to the attic and discovered a safety lock out code. This systems appears to have had the inducer motor replaced. I discovered the flame sensor wire was burnt up, the manifold is completely matted with soot, and the burners are covered in soot. I checked my gas pressure to the system. I only have 7inwc coming into the gas valve, and it should be 13inwc. I checked the supplied gas pressure through the gas valve. It is reading 2.2inwc, and it should be 3.5inwc. I assume with the low gas supply it caused an incomplete combustion. This caused soot build up and it began lighting the soot. We will need to price for a gas valve, 5 burner manifold, 5 burner guides, and a minor wire repair. I was instructed by the realtor to email the dispatch to the owner. The owner will likely want to get the gas company out asap to perform a pressure test.
Anna, TX - Upon arrival, I found that the thermostat was blank. I proceeded to the attic and discovered a safety lock out code. This systems appears to have had the inducer motor replaced. I discovered the flame sensor wire was burnt up, the manifold is completely matted with soot, and the burners are covered in soot. I checked my gas pressure to the system. I only have 7inwc coming into the gas valve, and it should be 13inwc. I checked the supplied gas pressure through the gas valve. It is reading 2.2inwc, and it should be 3.5inwc. I assume with the low gas supply it caused an incomplete combustion. This caused soot build up and it began lighting the soot. We will need to price for a gas valve, 5 burner manifold, 5 burner guides, and a minor wire repair. I was instructed by the realtor to email the dispatch to the owner. The owner will likely want to get the gas company out asap to perform a pressure test.
Brayden W.
Brayden W.
Maintenance on 2017 trane furnace 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested for gas leaks 6. Tested functionality and cleaned flame sensor 7. Tested functionality and cleaned pressure switches and ports 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Tested functionality and visually inspected surface igniter 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14.Drain line tested with gallon of water for clogs and to push anything trying to solidify out Homeowner stated high gas usage, however I did not find any kind of gas leak or improper operation of the system. All was well with normal heating operation and zone operation. Outdoor condenser was looking pretty dusty so I also made sure to rinse out the unit. Noticed ru
Anna, TX 75409
Anna, TX - Maintenance on 2017 trane furnace 
1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested for gas leaks
6. Tested functionality and cleaned flame sensor
7. Tested functionality and cleaned pressure switches and ports
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Tested functionality and visually inspected surface igniter
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14.Drain line tested with gallon of water for clogs and to push anything trying to solidify out

Homeowner stated high gas usage, however I did not find any kind of gas leak or improper operation of the system. All was well with normal heating operation and zone operation. Outdoor condenser was looking pretty dusty so I also made sure to rinse out the unit. Noticed ru
Anna, TX - Maintenance on 2017 trane furnace 
1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested for gas leaks
6. Tested functionality and cleaned flame sensor
7. Tested functionality and cleaned pressure switches and ports
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Tested functionality and visually inspected surface igniter
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14.Drain line tested with gallon of water for clogs and to push anything trying to solidify out

Homeowner stated high gas usage, however I did not find any kind of gas leak or improper operation of the system. All was well with normal heating operation and zone operation. Outdoor condenser was looking pretty dusty so I also made sure to rinse out the unit. Noticed ru
Shelby S.
Shelby S.
I performed a single heating maintenance on a 2022 gas system. I checked amps, capacitor, filter, electrical, cleanliness, and safeties. The system is mechanically performing well for now, but the unit has a bunch of dust present. This home is located right next to a construction site, and it is making its way into the home. I advised the customer that cleaning needs to be done, but would be smart idea to wait until the construction is done. I provided an option to minimize dust in the unit until then with the filter upgrade kit. Also, we spoke about dedicated surge protection for the unit.
Anna, TX 75409
Anna, TX - I performed a single heating maintenance on a 2022 gas system. I checked amps, capacitor, filter, electrical, cleanliness, and safeties. The system is mechanically performing well for now, but the unit has a bunch of dust present. This home is located right next to a construction site, and it is making its way into the home. I advised the customer that cleaning needs to be done, but would be smart idea to wait until the construction is done. I provided an option to minimize dust in the unit until then with the filter upgrade kit. Also, we spoke about dedicated surge protection for the unit.
Anna, TX - I performed a single heating maintenance on a 2022 gas system. I checked amps, capacitor, filter, electrical, cleanliness, and safeties. The system is mechanically performing well for now, but the unit has a bunch of dust present. This home is located right next to a construction site, and it is making its way into the home. I advised the customer that cleaning needs to be done, but would be smart idea to wait until the construction is done. I provided an option to minimize dust in the unit until then with the filter upgrade kit. Also, we spoke about dedicated surge protection for the unit.
Brayden W.
Brayden W.
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested capacitor and contactor (outdoor electrical) 15. Rinsed condenser unit to promote heat exchange 16. Tested emergency heat and found no issues Heat pump and emergency heat heating cycle is working well. Homeowner brought to my attention that they lose power very frequently. Advised homeowner that installing surge protection would be very beneficial and could them from an expensive repair because everytime the power shuts of
Anna, TX 75409
Anna, TX - 1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested capacitor and contactor (outdoor electrical)
15. Rinsed condenser unit to promote heat exchange
16. Tested emergency heat and found no issues

Heat pump and emergency heat heating cycle is working well. Homeowner brought to my attention that they lose power very frequently. Advised homeowner that installing surge protection would be very beneficial and could them from an expensive repair because everytime the power shuts of
Anna, TX - 1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested capacitor and contactor (outdoor electrical)
15. Rinsed condenser unit to promote heat exchange
16. Tested emergency heat and found no issues

Heat pump and emergency heat heating cycle is working well. Homeowner brought to my attention that they lose power very frequently. Advised homeowner that installing surge protection would be very beneficial and could them from an expensive repair because everytime the power shuts of
Shelby S.
Shelby S.
Upon arrival, I found the furnace in a thermal limit lock out. I reset the system and began testing. I observed that the blower motor kept cutting in and out. I checked voltage while the motor was acting up, and I verified that I still had a constant 24 and 120v to the motor. I determined that the blower motor is failing and needs replacement. I checked the warranty, and I learned that it was expired. I reached out to the office to assist in pricing the motor. Customer declined repairs at the time of service. I left the unit off to prevent further damage to the system.
Anna, TX 75409
Anna, TX - Upon arrival, I found the furnace in a thermal limit lock out. I reset the system and began testing. I observed that the blower motor kept cutting in and out. I checked voltage while the motor was acting up, and I verified that I still had a constant 24 and 120v to the motor. I determined that the blower motor is failing and needs replacement. I checked the warranty, and I learned that it was expired. I reached out to the office to assist in pricing the motor. Customer declined repairs at the time of service. I left the unit off to prevent further damage to the system.
Anna, TX - Upon arrival, I found the furnace in a thermal limit lock out. I reset the system and began testing. I observed that the blower motor kept cutting in and out. I checked voltage while the motor was acting up, and I verified that I still had a constant 24 and 120v to the motor. I determined that the blower motor is failing and needs replacement. I checked the warranty, and I learned that it was expired. I reached out to the office to assist in pricing the motor. Customer declined repairs at the time of service. I left the unit off to prevent further damage to the system.
Shelby S.
Shelby S.
Determined that the thermostat needed batteries. This made the system go back to operating, but it was discovered that the current thermostat is worn out and needs replacing. I proposed replacing the thermostat and wiring in the common wire to make the thermostat not need batteries. Replacment of the front end thermostat and wiring the common wire into the the electrical to remove the need of batteries.
Anna, TX 75409
Anna, TX - Determined that the thermostat needed batteries. This made the system go back to operating, but it was discovered that the current thermostat is worn out and needs replacing. I proposed replacing the thermostat and wiring in the common wire to make the thermostat not need batteries.
Replacment of the front end thermostat and wiring the common wire into the the electrical to remove the need of batteries.
Anna, TX - Determined that the thermostat needed batteries. This made the system go back to operating, but it was discovered that the current thermostat is worn out and needs replacing. I proposed replacing the thermostat and wiring in the common wire to make the thermostat not need batteries.
Replacment of the front end thermostat and wiring the common wire into the the electrical to remove the need of batteries.
Shelby S.
Shelby S.
I performed a 2 system heating maintenance on 2020 equipment. I checked amps, capacitors, filters, electrical, and cleanliness. I determined that the system is currently mechanical in good shape. However, I did discover that the blower wheels have a reasonable amount of dust build up present. This causes drag on the motors and will internally wear them down faster. To help prevent surprise cleaning cost, the systems air filter needs to be upgraded to allow better removal. With the incoming weather, I advise adding at least 2 surge protectors to the outdoor units to protect the compressors. Customer declined all options at the time of service.
Anna, TX 75409
Anna, TX - I performed a 2 system heating maintenance on 2020 equipment. I checked amps, capacitors, filters, electrical, and cleanliness. I determined that the system is currently mechanical in good shape. However, I did discover that the blower wheels have a reasonable amount of dust build up present. This causes drag on the motors and will internally wear them down faster. To help prevent surprise cleaning cost, the systems air filter needs to be upgraded to allow better removal. With the incoming weather, I advise adding at least 2 surge protectors to the outdoor units to protect the compressors. Customer declined all options at the time of service.
Anna, TX - I performed a 2 system heating maintenance on 2020 equipment. I checked amps, capacitors, filters, electrical, and cleanliness. I determined that the system is currently mechanical in good shape. However, I did discover that the blower wheels have a reasonable amount of dust build up present. This causes drag on the motors and will internally wear them down faster. To help prevent surprise cleaning cost, the systems air filter needs to be upgraded to allow better removal. With the incoming weather, I advise adding at least 2 surge protectors to the outdoor units to protect the compressors. Customer declined all options at the time of service.
Shelby S.
Shelby S.
I performed a single system heating maintenance on a 2020 gas system. I checked amps, electrical, cleanliness, and safeties. The system is currently performing well. I advise that some air quality issues be addressed. The air quality check indicated poor air quality, and it is not good to breathe or for the operation of the system. Do to my findings, I offered to install an air treatment device and upgrade the filtration of the system. Also, I went over surge protection because of the incoming weather. It is important to protect these system from black outs, brown outs, and proximity lightning strikes. Customer elected to upgrade his filtration. I collected in full for the future work.
Anna, TX 75409
Anna, TX - I performed a single system heating maintenance on a 2020 gas system. I checked amps, electrical, cleanliness, and safeties. The system is currently performing well. I advise that some air quality issues be addressed. The air quality check indicated poor air quality, and it is not good to breathe or for the operation of the system. Do to my findings, I offered to install an air treatment device and upgrade the filtration of the system. Also, I went over surge protection because of the incoming weather. It is important to protect these system from black outs, brown outs, and proximity lightning strikes. Customer elected to upgrade his filtration. I collected in full for the future work.
Anna, TX - I performed a single system heating maintenance on a 2020 gas system. I checked amps, electrical, cleanliness, and safeties. The system is currently performing well. I advise that some air quality issues be addressed. The air quality check indicated poor air quality, and it is not good to breathe or for the operation of the system. Do to my findings, I offered to install an air treatment device and upgrade the filtration of the system. Also, I went over surge protection because of the incoming weather. It is important to protect these system from black outs, brown outs, and proximity lightning strikes. Customer elected to upgrade his filtration. I collected in full for the future work.
Shelby S.
Shelby S.
I performed a single system maintenance on a 2017 zoned gas system. I checked amps, filter, electrical, cleanliness, and safeties. I observed that a damper motor was actively trying to fail, the blower wheel was dirty, and the air quality could be improved. I provided options to address these concerns. Below is the work I provided at the time of service. System is heating upon departure. Blower cleaning allows us to remove the dust build up on the wheel. This dust causes drag on the motor and added wear to the internal bearings. The upstairs damper motor is not wanting to spring all the way open. It can be manually opened the rest of the way. This is a sign of future failure.
Anna, TX 75409
Anna, TX - I performed a single system maintenance on a 2017 zoned gas system. I checked amps, filter, electrical, cleanliness, and safeties. I observed that a damper motor was actively trying to fail, the blower wheel was dirty, and the air quality could be improved. I provided options to address these concerns. Below is the work I provided at the time of service. System is heating upon departure.

Blower cleaning allows us to remove the dust build up on the wheel. This dust causes drag on the motor and added wear to the internal bearings. 

The upstairs damper motor is not wanting to spring all the way open. It can be manually opened the rest of the way. This is a sign of future failure.
Anna, TX - I performed a single system maintenance on a 2017 zoned gas system. I checked amps, filter, electrical, cleanliness, and safeties. I observed that a damper motor was actively trying to fail, the blower wheel was dirty, and the air quality could be improved. I provided options to address these concerns. Below is the work I provided at the time of service. System is heating upon departure.

Blower cleaning allows us to remove the dust build up on the wheel. This dust causes drag on the motor and added wear to the internal bearings. 

The upstairs damper motor is not wanting to spring all the way open. It can be manually opened the rest of the way. This is a sign of future failure.

Your High Efficiency

Experts