Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in January 2026.
The most recent job was on January 19, 2026.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
During maintenance, I discovered that one of the electric heat strips is not coming on. I verified that the heating strip that is not coming on is still good. I determined that the heat sequencer is not passing power when it is supposed to to. I installed the new sequencer and tested the electric heat. The electric heat is back to performing at full capacity. During the replacement, I had some of my spades break. I replaced them and ensured my connections were good.
Upon arrival, I discovered that a connected has came loose. I tightened up the connection and tested the system. The unit is back to heating normally upon departure.
Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested for gas leaks 6. Tested functionality and cleaned flame sensor 7. Tested functionality and cleaned pressure switches and ports 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Tested functionality and visually inspected surface igniter 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14.Drain line tested with gallon of water for clogs and to push anything trying to solidify out Found water stains on flue pipe and noticed poor sealing of roof vent cap from the attic. Brought this to homeowners attention and advised him that this would be more in a roofers area of expertise. Also noticed decent amount of dust on the blower wheel. This will cause drag on the motor causing it to have to
Performed a complete heating system maintenance and inspection. 2016 2 zoned Gas system. Inspected and tested all electrical components and safety controls on the indoor unit; all components tested within manufacturer specifications. I found the ducts and plenum boxes, along with the blower wheel to be extremely dirt/dusty. Dust can affect the overall performance of the system and high energy bills. The system also has no type of ceiling savor from water damage if the system gets clogged up. Verified system temperatures: return air temperature measured at 69°F; supply air temperature measured at 119°F and rising. air filter was changed at time of inspection. Unit could benefit from an upgraded filtration system called an Aprilaire conversion kit; filter size is 20” x 25” x 4”. I visually inspected the outdoor unit, I did notice the system not having surge protection. Also notice some wear on the capacitor. I tested start amps on the unit and it was testing over 100amps and manuf
Preformed 2 system maintenance on amana gas units. Inspected and tested all electrical components and safety controls on the indoor unit; all components tested within manufacturer specifications. I found on the downstairs system the inducer motor, which helps remove the gas fumes from the home and system, was making a loud whining noise which indicates a failing motor. I also found that the duct work on both units along with the blower wheels could use a good deep cleaning. Verified system temperatures: return air temperature measured at 71°F; supply air temperature measured at 124°F and the upstairs unit was measured at 71 and 128 degrees. Confirmed air filter was replaced; filter size is 20” x 25” x 4”. On both units. I visually inspected the outdoor unit, The outdoor unit for upstairs had recently been replaced and is in good condition. It could benefit from having surge protection installed. He down stairs unit could use a condenser cleaning along with a combing. Also it
Performed a complete heating system maintenance and inspection. Inspected and tested all electrical components and safety controls on the indoor unit; all components tested within manufacturer specifications. Verified system temperatures: return air temperature measured at 76°F; supply air temperature measured at 115°F and rising. I did notice the return ducts to be forming build up. Provided estimate to have the cleaned. Confirmed air filter was recently replaced by client; filter size is 20” x 25” x 4”. Inspected and tested all electrical components on the outdoor unit; all components tested within manufacturer specifications. Except for the capacitor is reading on the lower end of the allowance from the manufacturer. 64 microfarads out of 70. Limit is at 63 microfarads. Confirmed system was operating properly and heating upon departure. System Status: Operating normally at time of service.
Performed a complete heating system maintenance and inspection. Inspected and tested all electrical components and safety controls on the indoor unit; all components tested within manufacturer specifications. Inspected UV bulb at client’s request; bulb is in good working condition and does not require maintenance Verified system temperatures: return air temperature measured at 71F; supply air temperature measured at 115F and rising. Confirmed air filter was recently replaced by client; filter size is 20” x 25” x 4”. Inspected and tested all electrical components on the outdoor unit; all components tested within manufacturer specifications. I noticed the system didn’t have any type of surge protection. By adding surge protection you can help save your system from lightning strikes, brow/black outs and any other type of surge in power. It comes with a 3yr warranty along with a $10,000.00 insurance policy for repairs if the part fails from the manufacturer. Confirmed system was o
Warranty replacement of the Compressor and TXV 1. We will need to remove the contaminated refrigerant 2. We will cut and remove the failed compressor 3. We will remove the TXV in the indoor unit 4. We will flush the entire refrigerant line set with an acid cleaner 5. We will blow through it with nitrogen to push the remaining acid cleaner out 6. We will install the new TXV 7. We will remove the refrigerant filter 8. We will install the new compressor and refrigerant filter 9. We will pressurize the line set to ensure there are no leaks in the system 10. We will vacuum the refrigerant lines to remove any further contamination in the line set 11. We will replace the breaker outside with a 35 amp (complementary) 12. We will charge the system with new refrigerant 13. We will test the system to ensure it is operational.
We performed 2 heating maintenances on 2015 gas systems. We checked amps, electrical, cleanliness, and safeties. We discovered that the blower motor for the downstairs system is in need of a cleaning in the near future. Dust build up causes strain on the motor itself. There is an area on the upstairs system where the seal has come up. This will cause water damage due to condensation formation. We noticed that the equipment does not have surge protection. With the units being on the older side, we advise an extra layer of protection on the outdoor units. These will serve as a buffer for the heart of the system, if a surge were to happen.
Arrived on site for QC visit on new install. Homeowner stated all was well with normal system operation. System is level all wiring is good no error codes. Tested normal heating operation. Measured 140 supply. Tested heat kit. Drain line is draining well at this time. Outside unit is level all electrical components are good and tight. All components are operating as designed. Added refrigerent to manufacturer specification. Notice a small amount of air leakage on supply plenum and rust around an improperly sealed duct. Also noticed no surge protection on the system. Discussed options for getting both of these issues addressed. Homeowner requested some time to think over the recommendations. Unit in good working order upon departure. Thank you for your time.

