Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in January 2026.
The most recent job was on January 9, 2026.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Performed a complete heating system maintenance and inspection. Inspected and tested all electrical components and safety controls on the indoor unit; all components tested within manufacturer specifications. Verified system temperatures: return air temperature measured at 73°F; supply air temperature measured at 113°F and rising. Changed filter for client. Filter size is 20x36x1. Inspected and tested all electrical components on the outdoor unit; all components tested within manufacturer specifications. Except for the compressor start up amps. They were starting high at over 100 amps. Provided estimate for hard start kit to bring down those high start amps. Confirmed system was operating properly and heating upon departure. System Status: Operating normally at time of service.
Performed a complete heating system maintenance and inspection and dryer vent cleaning. Inspected and tested all electrical components and safety controls on the indoor unit; all components tested within manufacturer specifications. . Verified system temperatures: return air temperature measured at 76°F; supply air temperature measured at 109°F and rising. Confirmed air filter was recently replaced by client; filter size is 20” x 25” x 1” Ducts could benefit from a cleaning as I found the plenum boxes and ducts to be dusty. Inspected and tested all electrical components on the outdoor unit; all components tested within manufacturer specifications. Confirmed system was operating properly and heating upon departure. System Status: Operating normally at time of service.
Performed a complete heating system maintenance and inspection. 2023 heat pump Inspected and tested all electrical components and safety controls on the indoor unit; all components tested within manufacturer specifications. . Verified system temperatures: return air temperature measured at 76°F; supply air temperature measured at 102°F and rising. Confirmed air filter was recently replaced by client; filter size is 20” x 25” x 4”. Inspected and tested all electrical components on the outdoor unit; all components tested within manufacturer specifications. I noticed the unit did not have any type of surge protection. By adding surge protection you can save the unit from getting damaged by lightning, blackouts or other types of power surges. Confirmed system was operating properly and heating upon departure. System Status: Operating normally at time of service.
Preformed change out of the defrost board in the outside unit. After installing I tested he unit to make sure it would run properly. Everything is working in good operating condition. Heating upon departure.
Performed maintenance on Lennox 2020 furnace 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested for gas leaks 6. Tested functionality and cleaned flame sensor 7. Tested functionality and cleaned pressure switches and ports 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Tested functionality and visually inspected surface igniter 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. Found capacitor testing outside of manufacturer specification. 31 of 35 +/-5%. Also noticed very good amount pitting on the contactor as well as 18 ohms of resistance which is higher than I would like to see. Recommend replacment of capacitor to avoid system failure at a minimum and hard start kit bundle to ensure longest life span of electrical components
Upon arrival I started inspecting the unit from he inside. I provided a call for heat and nothing came on, I then provided a call for cooling and nothing came on again. I tested for power to the thermostat and I was getting 0volts of power. I then proceeded to check the main circuit breaker box and found he air handler breaker to be in the office position. I turned he breaker back on and tested for power at the air handler breaker and I was getting 240 volts coming in but 0 volts being supplied out. This tells me that the circuit breaker foe he air handler is burnt out and is not working properly. I called he client and explained to him what was going on and provided estimate to have breaker changed out. He elected to not go with the estimate. Unit is still down and not working at the time of departure.
Performed maintenance on 2023 Trane Heatpump 3T 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested capacitor and contactor (outdoor electrical) 15. Rinsed condenser unit to promote heat exchange 16. Tested emergency heat and found no issues No issues with heating found today. Homeowner complained of dust in master bedroom. Recommended Air Scrubber approved medical device to purify air and ionize fine particulates to cause dust to settle or get picked up by filter rather th
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested capacitor and contactor (outdoor electrical) 15. Rinsed condenser unit to promote heat exchange 16. Tested emergency heat and found no issues Found return Plenum dirtier than expected as well as high particular matter on air quality report. Recommend air scrubber to ionize fine particulars in the air, causing them to clump together and get picked up by the filter or become heavy enough that they settle. Also noticed no se
I performed a single heating maintenance on a 2019 heat pump system. I checked amps, capacitor, filter, electrical, cleanliness, and safeties. I observed that the growth is returning since cleaning the system in March. Cleaning is only half the battle. It is recommend to install a u/v to stunt the formation of growth. It will likely need to be cleaned again soon. The equipment currently doesn’t have surge protection. We discussed to importance of having some installed. I observed that the condenser fan motor is pulling 75% of the rated 1.14/1.4amps. The fan motor is coming to the end of its life and will likely need replacing soon. I provided options to address these listed items.
Performed a complete heating system maintenance and inspection. 2022 Lennox gas Inspected and tested all electrical components and safety controls on the indoor unit; all components tested within manufacturer specifications. Verified system temperatures: return air temperature measured at 67°F; supply air temperature measured at 139°F. Confirmed air filter was recently replaced by client; filter size is 20” x 25” x 4”. I visually inspected the outdoor unit, The outdoor unit could benefit from having a surge protector installed to protect the unit from lightning strikes, black outs and other types of surges in power. It comes with a 3 year warranty and $10,000.00 insurance policy for repairs if surge protection were to ever fail and components be come damaged after a surge in power. Confirmed system was operating properly and heating upon departure. System Status: Operating normally at time of service

