Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in December 2025.
The most recent job was on December 24, 2025.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Performed a complete heating system maintenance and inspection. Inspected and tested all electrical components and safety controls on the indoor unit; all components tested within manufacturer specifications. Verified system temperatures: return air temperature measured at 76°F; supply air temperature measured at 102°F and rising. Confirmed air filter needed to be changed. Filter size Aprilaire 910 Inspected and tested all electrical components on the outdoor unit; all components tested within manufacturer specifications. Confirmed system was operating properly and heating upon departure. System Status: Operating normally at time of service.
Upon arrival I found that the condenser fan motor was not working or spinning, i ohmed out the fan motor and it was reading at 52 ohms which is out of manufacturer specifications and tells me that the fan motor is bad. Client elected to have fan motor replaced.
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Inspected / replaced return filter. 7. Inspected return plenum for debris/ dirty. 8. Inspected evaporator coil. 9. Inspected blower motor/ blower wheel. 10. Checked blower amp draw. 11. Measured temperature differential from supply to return. 20 degrees measured. 12. Tested capacitor and contactor (outdoor electrical) 13. Rinsed condenser unit to promote heat exchange 14. Tested electric heat and Goodman on right side was testing low on both legs (under warranty not interested right now. Large amount of dust on blower wheel and Evap coils for both units. Recommend cleanings to ensure maximum lifespan of the equipment and dust will cause excessive wear and tear on everything from the motors to the compressors. Units in good working order upon departure.
I performed a single system heating maintenance on a 2018 unit. I checked amps, filter, electrical, cleanliness, sequence of operation, and safeties. From a mechanical standpoint, the unit is performing good. The system has a reasonable amount of dust build up present. This adds stress to the mechanical components of the system. Dust build up will cause efficiency and part life expectancy to be reduced. I provided some options to remove the dust build up to alleviate stress on the components.
Homeowner stated downstairs was still not keeping up. Upon inspection I noticed no air was flowing downstairs or upstairs even though unit was running. Shut down unit for testing. Last time I was here I was unable to access the attic where the dampers are located. Informed homeowner I would need to take off the trim around the attic access in order to access the dampers. Received approval through text for with permission from homeowner to tear off the trim. Advised homeowner we would not be responsible for damages resulting from removal and that I would have to charge for a repair. I was then able to remove the trim and access panel. Upon testing, I found that the downstairs damper was not opening and I could not get it to spring open. Damper is stuck shut. Advised homeowner that the damper was still under warranty however I would still have to charge for labor of the installation. Replace damper under warranty with part off of truck. Tested extensively to ensure good temperature down
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested capacitor and contactor (outdoor electrical) 15. Rinsed condenser unit to promote heat exchange 16. Tested emergency heat and found no issues Found extremely dirty/dusty ducts and bacterial growth on blower wires and evaporator coil. Recommend duct cleaning to improve air quality and over all efficiency and health of the ac system. Also would not be a bad idea to have an air scrubber to help maintain the system and further
Preformed installation of the new suction temperature sensor on the outdoor unit. Unit is now working properly and not short cycling in heat mode. Unit was heating upon departure
Upon arrival I found he unit to be short cycling in heat mode. I found that the board was giving an error code of 4 flashes which means the suction line temperature sensor was not working properly. Client elected to have sensor replaced. Units emergency heat does work but the unit is down until sensor is replaced.
Preformed single system maintenance on a 2020 heat pump. Tested all electrical components on the air handler unit. All tested within manufacturer specifications. Client did not have filters at this at the time of inspection. I did let the client know that he has the capability for the 20x25x4 filter instead of the 1 in. I did notice in the air handler the coil, drain pan and blower wheels had dust/debris on them. I proceeded outside to test all electrical components they all tested within manufacturer specifications. Unit was heating upon departure
I performed 2 heating maintenances on 2026 gas systems. I checked amps, filters, electrical, cleanliness, and safeties. I observed that the gas line for the units are not code compliant because it is mission a sediment before supply the gas to the line. These are used to prevent contaminants reaching the gas valve. Once it reaches the gas valve it will gas the gas valve to either become stuck or leak gas. I noticed that I was getting a feint gas smell at the downstairs unit. Upon investigating, I determined that the gas valve isn’t fully closing resulting in a gas leak. This needs to be taken care of for safe operation. The unit do not have float switch or blow out valves. Customer declined receiving an estimate for those at this time. I reached out to Lennox to price the gas valve for the downstairs system, and, it is readily available.

